The Aero Precision BREACH is a rugged, ambidextrous, precision-manufactured charging handle for the M5/AR308 platform. The BREACH’s design utilizes a reinforced 7075 aluminum bar that is up to the most demanding tasks. Its ambidextrous levers feature a patent-pending, dual spring system, that directs the force-of-use into the robust charging handle body. This allows the shooter to use a one-handed charging technique without compromising the part – a pitfall for traditional charging handles. The small lever configuration provides a low-profile, easily gripped interface that is comfortable when slung and can be actuated effortlessly from either side of your rifle.

The M4E1 PRO Lower Receiver seamlessly integrates ambidextrous controls into the M4E1 Lower that allows for the shooter to easily operate the bolt catch, magazine release, and safety without modifying their dominant firing hand.

M5 .308 Rifle Buffer for use in .308 Rifles with a fixed buttstock. This .308 buffer is specific to .308 Rifles and will not work in .308 Carbines or AR15 platform firearms. Perfect for your next build or direct replacement for worn out parts. Made in the USA.

FEATURES:

Standard low-profile design provides great fit under slim profile free float handguards including the Aero Precision ATLAS series of handguards
Adjustment screw is held in place by a spring and detent providing repeatable audible "clicks" upon adjustment removing the need for secondary set screws that can come loose under recoil
Custom machined stainless-steel adjustment screw provides 15 gas adjustment settings
Carbon fouling is channeled to a sacrificial chamber to help prevent carbon locking as well as provide an access point for solvent in the event carbon locking does occur
User-serviceable design allows for service and cleaning of the gas system

SPECIFICATIONS:

Machined from 4140 steel
Nitride coated
Compatible with barrels utilizing a .875 gas block journal
Attaches to barrel via 10-32 x 3/16 knurled set screws

INCLUDES:

Assembled Adjustable Gas Block
One 6" 3/32 adjustment wrench for easy gas block adjustment underneath installed handguard
Replacement spring and detent included

The M5 .308 Assembled Upper Receiver comes with both the port door and forward assist hardware preinstalled. Forged from 7075-T6 aluminum, this assembled upper is precision machined to accept standard .308 components and is the ideal upper for your big bore build. It includes M4 Feedramps, .2795 takedown pin holes (DPMS size), and DPMS High Profile (.210) Tang). NOTE: Requires charging handle, barrel, handguard, gas block, muzzle device, gas tube and BCG (Bolt Carrier Group) to complete.

The EPC-9 Lower Receiver delivers billet aesthetics in a forged package for your next pistol caliber build. This custom-designed enhanced forging is machined from 7075-T6 Aluminum and has several functional features, much like the M4E1, to help simplify the assembly process for the at home builder. Features: Threaded bolt catch pin for easy installation, Integrated enlarged trigger guard to remove any risk of breaking off trigger guard tabs, and provide an overall more rugged platform to build on, Threaded takedown pin detent recess to allow for the installation of a detent and spring with a single 4-40 set screw, Flared magazine well for quick and easy reloads, Proprietary components pre-installed from the factory, Standard AR15 takedown/pivot pin lug pattern, Machined from custom forged 7075-T6 aluminum, Compatible with standard frame GLOCK magazines

Aero Ultralight Scope Mount/Ring Combo frees you from unnecessary bulk. It features a rigid, lightweight design and is compatible with AR type upper receivers with Mil-Spec 1913 Picatinny rails and has a cross-slot keyway that offers excellent recoil protection.

Machined from 6061-T6 Aluminum, the R-ONE line of handguards are designed with size and weight in mind, providing the perfect handguard for your lightweight build. Aero’s proprietary ATLAS attachment system is a durable and dependable mounting platform, maintaining a slim profile while still providing the strength and stability customers have grown to love from Aero Precision handguards. The Aero Taper Lock Attachment System (ATLAS) is both functional and aesthetically pleasing. It features 2 mirrored tapered locking nuts that provide evenly distributed clamping pressure across a custom engineered barrel nut with use of a turnbuckle screw. A ratcheting detent further secures the design while providing positive registration during installation. By design, the even pressure of the ATLAS system avoids distortion of the handguard often seen with current applications during installation. All hardware mounting parts are included with the purchase of an ATLAS Handguard. ATLAS Handguards are designed to match seamlessly with Aero’s M4E1 Threaded Upper Receivers. Additionally, they are compatible with any Mil-Spec AR-15 upper receivers as well. However, they may not be compatible with billet upper receivers due to indexing tabs.

The Aero Precision BREACH is a rugged, ambidextrous, precision-manufactured charging handle for the M5/AR308 platform. The BREACH’s design utilizes a reinforced 7075 aluminum bar that is up to the most demanding tasks. Its ambidextrous levers feature a patent-pending, dual spring system, that directs the force-of-use into the robust charging handle body. This allows the shooter to use a one-handed charging technique without compromising the part a pitfall for traditional charging handles. The large lever configuration provides an extended operating surface, perfect for a user with bigger hands, or someone who wants a larger surface for manipulation of the charging handle.

Aeros’ Carbine Buffer tube for AR15/AR10 platforms. Features Mil-spec dimension and 6-position. Made in the USA.

Aero’s gas blocks create an efficent and reliable gas system for your AR15 or AR 308 rifle build. Features fits barrels with .936 outer diameter, low profile for easy fitment and set screws are steel 10-32 x 3/16 knurled cup point.*Note- Roll pin not included. We do not recommend the use of red thread locker on the threads of the set screws. If you decide to use thread locker we recommend using the non permanent variety. Made in the USA.

The Delta 556 was designed as an affordable device that embodies our passion for performance. The Delta 556 maintains great muzzle control characteristics through the large linear ports. This also gives it spectacular flash suppressing characteristics. The Delta 556 contains no chambers so gas is expelled more forward which reduces the concussion to the shooter although recoil mitigation will feel similar to that of an A2 birdcage. This is a great all around device for tactical, competition or recreational shooters at a very affordable price.

Tried and True Standard Charging Handle
Black Anodized
Caliber – .308
Made in the USA

This high quality bolt carrier group is a valuable addition to your AR15 build.

Features:

No Aero ‘A’ Logo
M16-cut carrier
Machined from 8620 Tool Steel (Carrier) and 9310 Steel (Bolt)
Carrier has forward assist serrations
Black Nitride Finish – advanced lower friction coating that minimizes the need for lubricants and cleaning
Properly staked gas key
Shot peened
HPT tested
Black o-ring insert on extractor
High quality BCG

AR15 BAR Barrel Nut + Shims

The Aero Precision BREACH is a rugged ambidextrous precision-manufactured charging handle for the AR15 platform. The BREACH's design utilizes a reinforced 7075-T6 aluminum bar that is up to the most demanding tasks. Its ambidextrous levers feature a patent-pending dual spring system that directs the force-of-use into the robust charging handle body. This allows the shooter to use a one-sided charging technique without compromising the part — a pitfall for traditional mil-spec charging handles.

The large lever configuration provides an extended operating surface perfect for a user with bigger hands or someone who wants a larger surface for manipulation of the charging handle.

Features:

Ambidextrous Controls: Ergonomically designed 7075 Aluminum levers allow the user to easily charge their firearm with either hand while remaining low profile and comfortable when slung.
Robust Construction: Reduced chamfer angles on the 7075 Aluminum reinforced bar design provide a strong foundation for the BREACH that is resistant to rotational flex or breakage.
Patent-pending Lever Mechanism: Transfers force-of-use away from the roll pins and into the top/head portion of the reinforced bar protecting the charging handle in the most demanding circumstances.
Gas Deflection Shelf: Aligns with the upper receiver to redirect gas flow away from the users face when shooting suppressed.
Functional Design: It is not all just good looks. Stylistic cuts on the charging handle also help to clear stuck on carbon and debris from the upper receiver while the spacer design seals and protects the lever mechanism from debris.

The small lever configuration provides a low-profile easily gripped interface that is comfortable when slung and can be actuated effortlessly from either side of your rifle.

Features:

Ambidextrous Controls: Ergonomically designed 7075 Aluminum levers allow the user to easily charge their firearm with either hand while remaining low profile and comfortable when slung.
Robust Construction: Reduced chamfer angles on the 7075 Aluminum reinforced bar design provide a strong foundation for the BREACH that is resistant to rotational flex or breakage.
Patent-pending Lever Mechanism: Transfers force-of-use away from the roll pins and into the top/head portion of the reinforced bar protecting the charging handle in the most demanding circumstances.
Gas Deflection Shelf: Aligns with the upper receiver to redirect gas flow away from the users face when shooting suppressed.
Functional Design: It is not all just good looks. Stylistic cuts on the charging handle also help to clear stuck on carbon and debris from the upper receiver while the spacer design seals and protects the lever mechanism from debris.

The AR15 Enhanced Pistol Buffer Kit is the perfect complement to your pistol build. This kit features mil-spec components that are manufactured in the USA.

Includes:

Enhanced 7075-T6 Aluminum Pistol Buffer Tube
Carbine buffer
Buffer spring
End plate and lock nut
Made in the USA

Our lower parts kit helps you to build a custom AR15 from the ground up. Mil-spec dimensions and coating ensure the highest quality and correct component interface.

This lower parts kit does not include the fire control group pistol grip or trigger guard.

Includes:

Takedown/pivot Spring
Takedown/pivot detent
Takedown pin
Pivot pin
Bolt Catch
Bolt Catch Spring
Bolt Catch buffer
Bolt catch roll pin
Safety Selector
Safety Selector spring
Safety Selector detent
4-40 Set Screw (for threaded takedown pin detent hole)
Buffer retainer
Buffer retainer spring
Magazine catch body
Magazine catch spring
Magazine catch button

AR15 MOE Lower Parts Kit Minus FCG – Black

Our lower parts kit helps you to build a custom AR15 from the ground up. Mil-spec dimensions and coating ensure the highest quality and correct component interface.

Includes:

Takedown/pivot Spring
Takedown/pivot detent
Trigger/hammer pin
Takedown pin
Pivot pin
Bolt Catch
Bolt Catch Spring
Bolt Catch buffer
Bolt catch roll pin
Safety Selector
Safety Selector spring
Safety Selector detent
4-40 Set Screw (for threaded takedown pin detent hole)
Buffer retainer
Buffer retainer spring
Trigger guard
Trigger guard roll pin
A2 pistol grip
Pistol grip screw
Pistol grip lock washer
Trigger spring
Hammer spring
Disconnector spring
Magazine catch body
Magazine catch spring
Magazine catch button
Hammer
Trigger
Disconnector