YOU MUST BE 18 OR OLDER TO ENTER

AimShot’s boresight is made with a solid and durable brass housing and utilizing a 640nM wavelength throughout the line that guarantees zeroed in and requires no adjustment. It runs on button cell batteries for all closed chamber operations but, can be retro fitted with a battery pack to increase battery life from 10 minutes to over 20 hours.

The most complete, accurate, easy and inexpensive way to accurately bore sight your weapon. By installing a laser diode into a (.223 Rem. for rifle and 9mm, 30 cal. for pistol) and utilizing an assortment of arbors (except 9mm– no arbor required), it is possible to bore sight virtually any caliber weapon.

The HG Elite allows operators to acquire targets with precision accuracy in any condition. AimShot’s true 2 MOA center dot is easy to acquire and customizable for any situation throughout its brightness settings in both visual spectrum and night vision ensuring either hand shooting accuracy even on log range targets. Its basic features include a built-in inertia switch auto shut off after 5 min, automatic brightness control setting, true infrared, Fully adjustable windage and elevation, integrated quick release mount and is waterproof/shockproof.

The HG Elite allows operators to acquire targets with precision accuracy in any condition. AimShot’s Green Crosshair reticle is easy to acquire and customizable for any situation throughout its brightness settings in both visual spectrum and night vision ensuring either hand shooting accuracy even on log range targets. Its basic features include a built-in inertia switch auto shut off after 5 min, automatic brightness control setting, true infrared, Fully adjustable windage and elevation, integrated quick release mount and is waterproof/shockproof.

The HG Elite allows operators to acquire targets with precision accuracy in any condition. AimShot’s 2MOA Dot with 65 MOA Circle reticle is easy to acquire and customizable for any situation throughout its brightness settings in both visual spectrum and night vision ensuring either hand shooting accuracy even on log range targets. Its basic features include a built-in inertia switch auto shut off after 5 min, automatic brightness control setting, true infrared, Fully adjustable windage and elevation, integrated quick release mount and is waterproof/shockproof.

The KT6132 is a traditional red tube laser that fits on most pistols with a rail under the barrel. It comes with a standard picatinny rail mount that still gives the operator ease of access to make adjustments. It offers the combination of customization and extended usage to make it the perfect pistol laser for every situation. Powered by 3 LR44 batteries. Customizable to user preference, offers both traditional and pressure switch operations to give the user total control its function to suit their needs.

Looking for an ultra compact red laser specifically designed to fit both the Ruger LCP II and LCP MAX pistol that doesn’t break the bank? Look no further! We have developed a trigger guard mounted red laser for the concealed carry pistols that are second to none. Nothing to snag on and easy to activate, the KT6506-LCPII laser fits both the Ruger LCP II and Ruger LCP MAX red laser and makes it easy to point and shoot! Features automatic shut off after 5 minutes.

The idea to give the operator total control of the outcome of any situation led us to develop the KT810 series. Built to the highest of quality giving the operator the reliability that they need to get the job done. Offering the variety that you need throughout the kit line you can get exactly what you need to attach it however onto whatever you want to mount it on. Easy adjustment, using a 4-way alignment system under the lens cover it is engineered to allow the operator to set to zero and not worry about it falling out of alignment. Waterproof up to 30 M.

The Aimshot Pistol Boresight Kit is a 30 Carbine and 9mm Laser Bore Sight that is used to bore sight your rifle or most pistols. The 30 Carbine is the laser that is used with all of the pistol caliber arbors to bore sight your pistols. Uses 2 AAA batteries (included) to power the laser for 10-20 hours.

Modular Battery Pack upgrade for existing AimShot 223 laser bore sights. Instead of using the 3 small watch batteries, this allows you to upgrade to the external battery pack that utilizes two AAA batteries and will run the red laser for 20+ hours. Fits all AimShot and SpeedAim 223 laser bore sight models. Also a replacement in case something happens to your existing BSB223 laser bore sight. Will not fit the green laser models.

The MBS9, 9mm laser bore sight adds the modular battery pack that allows you to remove the small watch batteries and end cap (included) and replace with it with an external battery pack that contains 2 AAA batteries (included) that will give you run times of 20+ hours for your laser bore sight. The external battery pack has a small magnet on the side to hold it to the receiver and allow you extra time to get your optics dialed in.

This kit includes BS223 laser bore sight module as well as the AR243 and AR3006 arbors to cover most of the major calibers.

This kit includes the original BS223 laser bore sight module as well as the AR243 and AR3006 arbors to cover most of the major calibers. They come in a nice zipper pouch.

FEATURES
–Picatinny Quick Release Bipod Adapter
-The Bipod Stud is compatible w/ traditional style Harris Bipods

FEATURES
–Allows you to quickly remove or attach items to picatinny rail
-Ideal for shorter optics/red dot sights that you want to raise to co-witness lower in the window

FEATURES
–Allows you to quickly remove or attach items to picatinny rail
-Ideal for lights & lasers w/ smaller rail mounts

FEATURES
–Allows you to quickly remove or attach items to picatinny rail
-Ideal for shorter optics/red dot sights that ou want to raise to co-witness lower in the window

FEATURES
–Allows you to quickly remove or attach items to picatinny rail
-Ideal for shorter optics/red dot sights that ou want to raise to co-witness lower in the window or for items
you want to quickly & easily remove from your rails w/out using tools

FEATURES:
-Utilizing 2 alignment pins & a locking cylinder these mounts are designed for the abuse
-Attaches & releases to the rail w/ 2 simple quick release buttons, allowing for easy on/off w/out sacrificing
mount retention

FEATURES:
Height: 1.8
Length: 8.0
Width: 6.1
Unlock with two button press
No tools required
Balck aodized 6061 T6 Balck anodized aluminum

FEATURES:
Height: 1.15
Length: 6.75
Width: 4.9
Attaches with a snap
Fits most traditional style bipods

TXP Pistol light features a universal mounting system that allows the light to be adapted to fit most rail systems on pistols from compact to full size. Features carbon fiber-reinforced nylon, three modes-low/high/strobe, ambidextrous activation on either side of the unit and USB rechargeable Lithium-Ion battery.