In addition to being an affordable reloading accessory the Frankford Quick-N-EZ Rotary Media Separator is built to last. To separate brass from media in a quick and efficient manner it is hard to beat the action of this media separator. With the turn of a handle the process begins.
With this separator brass becomes trapped inside the separator while at the same time media drops into a 3.5-gallon bucket although it also fits perfectly on top of a 5-gallon bucket as well. Because of this media can be used again although it will need to be replaced occasionally.
When it comes to high-quality and affordable stands the Battenfeld Technologies Reloading Stand is the preferred choice for many people. This stand is designed to hold a reloading press securely in place. It is made from strong and sturdy powder-coated steel and with a three-leg design that includes rubber tips it offers absolute stability.
This stand measures 39 x 26 x 24 inches and comes complete with the bench plate system as well as two sets of additional bench plates concrete block holder and pre-drilled holes on each leg to make mounting accessories quicker and easier.
Frankford Rotary Separator Kit w/o bucket
The direct-drive Frankford Arsenal Rotary Tumbler Lite 110V simplicity and streamlined function is capable to tumbling up to 300 pieces of 223 brass (up to 2 lbs). Clear cap so you can see tumbling action. Only 8 lbs this tumbler is easy to dump. Integrated carry handle.
The Rotary Tumbler Lite Professional Kit provides everything needed to perform rotary tumbling brass cleaning from start to finish. This all-encompassing bundle includes the Frankford Arsenal Rotary Tumbler Lite Wet/Dry Media Separator Brass Dryer and 2lbs of stainless steel media.
Features:
- Kit includes all the tools necessary to perform rotary tumbling & brass drying
- Over $100 savings on bundled kit
The X-10 Small Swage-Prime Pin Assembly contains a small swage and prime pin which are crucial parts of the X-10. Having an extra set on hand prevents downtime and provides peace of mind should the factory-installed units wear or get damaged.
The Stainless Steel Media Pins are ideal for rotary tumbling brass. When combined with a liquid bath they deliver unmatched cleaning performance. Constructed of high quality 304 stainless steel the media pins effectively penetrate inside of cases and into primer pockets.
The Swage Support Die is compatible with the Frankford Arsenal X-10 Progressive Press along with any other reloading system utilizing inline swaging. If running multiple X-10 Tool Heads the user can leave this die fully setup on their Tool Head making it quick and easy to make caliber swaps.
Features:
- For use with x-10 progressive press or other reloading systems that utilize inline swaging
- Standard 7/8"X14 threads
- Leave installed on x-10 tool head for fast caliber swaps
Frankford Treated Corn Cob Media 4.5 lb
Frankford Arsenal Walnut Brass Cleaning Media is sold in 5- 7- and 18-pound options. While there are other brands people who do reloading have depended on the Frankford name for years and for good reason. This particular cleaning media is capable of moving grit dirt and powder residue from brass cases in a quick and efficient manner prior to reloading.
With this media brass stays in excellent condition; while the media can be used multiple times over for optimal performance it does need to be replaced from time to time.
The Universal Bullet Seating Die works with .224 to .338 caliber bullets. Featuring a cutout window die body the Universal Bullet Seating Die holds the bullet in place while seating. The built-in micrometer allows for precise .001” micro-adjustments to the seating depth of the bullet. Includes 9 bullet alignment sleeves 3 VLD bullet seating stems and a molded storage case. (Note: one alignment sleeve and one VLD bullet seating stem are pre-assembled inside the die.)
Included Caliber Fittings
- .224 Cal
- .243 Cal
- .257 Cal
- .264 Cal
- .277 Cal
- .284 Cal
- .308 Cal
- .325 Cal
- .338 Cal
Features
- Experience precise micro-adjustments to the seater depth of the bullet with a built-in micrometer
- Works for .224 – .338 cal and has a standard 7/8 x 14 thread
- One alignment sleeve and VLD bullet seating stem are preassembled in the die
- Bullet alignment sleeves 3 CLD bullet seating stems and a molded storage case
Clean attractive brass should be the goal of every reloader. Cleaning brass by tumbling is the economical safe first step in assembling quality handloads. Besides ensuring long life for the most valuable component of your ammunition cleaning your brass will help reduce wear and tear on your expensive reloading dies not to mention the chamber of your firearm. Grit and grime from uncleaned brass can become imbedded in the inner surfaces of your sizing dies scratching and marring every subsequent case. The same grime can be expected to accelerate wear in the chamber and feeding system of your rifle or handgun.
5lbs. Walnut in a reusable plastic container. NOTE: Walnut cleans better than corn and corn polishes better than walnut.
Caliber conversion kits include everything needed to connect the X-10 Bullet Feeder Collator (sold separately) to the X-10 Progressive Reloading Press. Kits include a caliber-specific bullet collator plate bullet feed and shuttle assembly and a micrometer adjustable seating die. The bullet feed system is integrated seamlessly into the X-10 Tool Head to feed and seat bullets in the same station.
Features:
- Kit includes bullet feed die assembly and bullet feed plate
- Integrates seamlessly into the x-10 tool head
- Feeds and seats bullets in the same station
- Micrometer for adjustable seating depth (0.001") for fine-tuning bullet seating
Coming in a convenient 3-pack this kit allows for 300 additional primers to be loaded up ahead of a reloading session and ultimately improves overall round output. The X-10 Primer Tube Kits can work with any progressive press on the market.
- 100 Primer Capacity Per Tube Allows The Ability To Pre-load An Extra 300 Primers Ahead Of A Loading Session.
- Primer Tube Kits Are Available For Both Small And Large Primers.
The X-10 Large Swage-Prime Pin Assembly contains a large swage and prime pin which are crucial parts of the X-10. Having an extra set on hand prevents downtime and provides peace of mind should the factory-installed units wear or get damaged.
The X-10 Powder Measure Relocation Kit adds even more versatility to the X-10 Progressive Press by relocating the powder drop operation to the station immediately after priming (station six). This allows the user to add powder check bullet feed bullet seat bullet crimp or other die setup configurations after powder drop.
- Allows Powder Drop To Take Place In Station Six Freeing Up Space For Other Operations After Powder.
- Relocating To Station Six Does Not Sacrifice The Positive Reset Feature On The Powder Measure.
- Allows The Ability To Run Additional Dies Like Powder Check Bullet Crimp And Other Dies There Would Not Have Been Space For Before.
X-10 Rifle Bullet Feeder Caliber Conversion Kits include everything needed to connect the X-10 Rifle Bullet Feeder Collator (sold separately) to the X-10 Progressive Reloading Press. Kits include a caliber-specific micrometer adjustable seating die assembly with an on/off switch. The bullet feed system is integrated seamlessly into the X-10 Tool Head to feed and seat bullets in the same station freeing up a station for bullet crimp or other operations.
Features:
- Kit includes bullet feed die assembly
- Integrates seamlessly into the X-10 tool head
- Feed and seat bullets in the same station?
- Micrometer for adjustable seating depth (0.001") for fine-tuning bullet seating
Coming in a convenient 3-pack this kit allows for 300 additional primers to be loaded up ahead of a reloading session and ultimately improves overall round output. The X-10 Primer Tube Kits can work with any progressive press on the market.
- 100 Primer Capacity Per Tube Allows The Ability To Pre-load An Extra 300 Primers Ahead Of A Loading Session.
- Primer Tube Kits Are Available For Both Small And Large Primers.
The X-10 Spare Locator Buttons are small but crucial parts of the X-10 that can be easily lost or misplaced. Having an extra set on hand prevents downtime and provides peace of mind should the originals that came with the unit get misplaced.
Frankford Ultrasonic Brass Clnng 32oz
The GoldenRod GUN SAVER Dehumidifier works by slightly increasing the air temperature inside the gun safe or other enclosure. This allows the warm air to circulate throughout the safe on a continual basis thus eliminating humidity mildew and condensation. All of which are dangerous to your expensive firearm collection.
- Removes moisture from gun safe interior
- Protects firearm investment
- Guards against rust
- Easy install quick plug attachment
- Mounting brackets included
- 110/120 volt AC
The Hooyman 10 is built just like the original Hooyman Saw. The MegaBite blade uses a high carbon SK5 steel in a tapered blade design combined with an impulse hardened 4 edge tooth that has improved tooth geometry for unmatched cutting performance and a longer cutting life. I-beam aluminum construction In-line design and the positive locking extension system combine to give you incredible cutting stability – even at full extension. The lock-back blade folds down with a touch of a finger.
The nHooyman 10 Ft folds down to just 28 inches so it’s easy to carry easy to pack and easy to store. And it extends to a full 10 ft. so it can reach where many ordinary pole saws can’t reach!
The MegaBite blade uses a high carbon SK5 steel in a tapered blade design combined with an impulse hardened 4 edge tooth that has improved tooth geometry for unmatched cutting performance and a longer cutting life. Each section of the telescopic extension arm locks down individually creating an incredibly sturdy saw that can extend up to 5 feet.
- Rapid charge
- 12V ac plug in
- Charge light indicator