| PRODUCT SPECIFICATIONS: | ||
| Dimension | 1.00 X 3.60 X 5.55 | |
| Height | 1.0000 | |
| Width | 3.6000 | |
| Length | 5.5500 | |
| TYPE/COLOR | ACTION ENHANCEMENT KIT BLACK | |
| SIZE/FINISH | GLOCK G43/G43X/G48 | |
| MATERIAL | POLYMER/STEEL | |
| OTHER FEATURES: | FITS GLOCK SLIM FRAME MODELS, | |
| INCLUDES TRIGGER AND BAR | ||
| ASSEMBLY, APEX SLIM FRAME | ||
| CONNECTOR, CRISP 4.5-5LB | ||
| TRIGGER PULL WEIGHT | ||
| FITS GLOCK 43/43X/48, NOT FOR | ||
| USE IN THE GLOCK 42 | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 1.00 X 3.60 X 5.50 | |
| Height | 1.0000 | |
| Width | 3.6000 | |
| Length | 5.5000 | |
| TYPE/COLOR | ACTION ENHANCEMENT KIT BLUE | |
| SIZE/FINISH | GLOCK G43/G43X/G48 | |
| MATERIAL | POLYMER/STEEL | |
| OTHER FEATURES: | FITS GLOCK SLIM FRAME MODELS, | |
| INCLUDES TRIGGER AND BAR | ||
| ASSEMBLY, APEX SLIM FRAME | ||
| CONNECTOR, CRISP 4.5-5LB | ||
| TRIGGER PULL WEIGHT | ||
| FITS GLOCK 43/43X/48, NOT FOR | ||
| USE IN THE GLOCK 42 | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 1.00 X 3.60 X 5.55 | |
| Height | 1.0000 | |
| Width | 3.6000 | |
| Length | 5.5500 | |
| TYPE/COLOR | ACTION ENHANCEMENT KIT RED | |
| SIZE/FINISH | GLOCK G43/G43X/G48 | |
| MATERIAL | POLYMER/STEEL | |
| OTHER FEATURES: | FITS GLOCK SLIM FRAME MODELS, | |
| INCLUDES TRIGGER AND BAR | ||
| ASSEMBLY, APEX SLIM FRAME | ||
| CONNECTOR, CRISP 4.5-5LB | ||
| TRIGGER PULL WEIGHT | ||
| FITS GLOCK 43/43X/48, NOT FOR | ||
| USE IN THE GLOCK 42 | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
FEATURES:
-Drop-in replacement
-Smooths uptake & reset
-Reduces pre-travel
-Reduces overall travel/reset
-Crisp trigger break
-Fits Glock 17/19 Gen 5
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 1.00 X 3.60 X 5.55 | |
| Height | 1.0000 | |
| Width | 3.6000 | |
| Length | 5.5500 | |
| TYPE/COLOR | ACTION ENHANCEMENT KIT | |
| SIZE/FINISH | GLOCK G17/G19 GEN 5 | |
| MATERIAL | POLYMER/STEEL | |
| OTHER FEATURES: | DROP-IN REPLACEMENT, | |
| SMOOTHS UPTAKE AND RESET, | ||
| REDUCES PRE-TRAVEL, | ||
| REDUCES OVERALL TRAVEL/RESET, | ||
| CRISP TRIGGER BREAK | ||
| FITS G17, G19 GEN 5 ONLY | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 1.00 X 3.55 X 5.45 | |
| Height | 1.0000 | |
| Width | 3.5500 | |
| Length | 5.4500 | |
| TYPE/COLOR | ACTION ENHANCEMENT KIT RED | |
| SIZE/FINISH | GLOCK G43/G43X/G48 | |
| MATERIAL | POLYMER/STEEL | |
| OTHER FEATURES: | DROP-IN REPLACEMENT, | |
| SMOOTHS UPTAKE AND RESET, | ||
| REDUCES PRE-TRAVEL, | ||
| REDUCES OVERALL TRAVEL/RESET, | ||
| CRISP TRIGGER BREAK | ||
| FITS GLOCK 43/43X/48, NOT FOR | ||
| USE IN THE GLOCK 42 | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 0.90 X 3.15 X 4.65 | |
| Height | 0.9000 | |
| Width | 3.1500 | |
| Length | 4.6500 | |
| TYPE/COLOR | ACTION ENHANCEMENT KIT | |
| SIZE/FINISH | SPRINGFIELD ARMORY HELLCAT | |
| MATERIAL | POLYMER/STEEL | |
| OTHER FEATURES: | DROP-IN REPLACEMENT, | |
| SMOOTHS UPTAKE AND RESET, | ||
| REDUCES PRE-TRAVEL, | ||
| REDUCES OVERALL TRAVEL/RESET, | ||
| CRISP TRIGGER BREAK | ||
| FITS SPRINGFIELD ARMORY | ||
| HELLCAT ONLY. CONTAINS TRIGGER | ||
| SEAR SPRING AND STRIKER SPRING | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
The Apex Enhancement Kit is the easiest Glock trigger upgrade on the market. Drop it in, and you get reduced pre-travel, faster reset, and a smoother pull across the board. All safety features remain factory-spec, and no permanent modifications are required.
Specs
- Fits: Glock Gen 3/4 (9mm, .40 S&W, .357 SIG, 10mm models; not .45 ACP/.45 GAP)
- Components: Action Enhancement Trigger, Gen 3 trigger bar, Ultimate Safety Plunger, Performance Connector
- Trigger Pull Reduction: Approximately 1 lb lighter
- Installation: Drop-in replacement
- Material: Steel and polymer
- Safety: Factory safety values maintained
- Compatibility: Not for Gen 5 Glocks or slim-frame models
Questions about fitment or availability? Give the shop a call and we’ll walk you through it.
Apex’s Hellcat kit reduces trigger pull to 5-5.5 lbs while smoothing pre-travel and reset. The drop-in red anodized trigger, lighter striker spring, and modified sear spring all work together to speed your precision follow-up shots without permanent modifications.
Specs
- Fits: Springfield Hellcat, Hellcat RDP, Hellcat Pro
- Color: Red
- Components: Trigger, striker spring, sear spring
- Trigger Pull: 5-5.5 lbs (after break-in)
- Material: Polymer and steel
- Installation: Drop-in, no permanent mods
- Safety: Maintains factory values
- Installation Time: Minutes
Questions about fitment or availability? Give the shop a call and we’ll walk you through it.
FEATURES:
-Supports a polymer frame pistol for armory work & detail disassembly
-Pre-positioned bosses easily adjustable to position frames
-One side is for the 45 striker, & the other is for the 9/40/357 striker
-Works on Smith & Wesson M&P & Glock model pistols
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 1.65 X 4.75 X 8.05 | |
| Height | 1.6500 | |
| Width | 4.7500 | |
| Length | 8.0500 | |
| TYPE/COLOR | ARMORER’S BLOCK | |
| SIZE/FINISH | S&W M&P/SHIELD/GLOCK PISTOLS | |
| MATERIAL | POLYMER | |
| OTHER FEATURES: | FITS S&W M&P PISTOLS | |
| (ALL CALIBERS), | ||
| FITS M&P SHIELD, | ||
| FITS GLOCK PISTOLS | ||
| (ALL CALIBERS) | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
FEATURES:
-Designed to pair w/ the Apex Polymer Armorer’s Block
-Prevents damage to the work surface
-Lowered surface at the center captures pins & parts as they are pushed out of the pistol frame
-Ring magnet on the underside keeps steel parts in the tray after being removed
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 1.65 X 4.75 X 8.00 | |
| Height | 1.6500 | |
| Width | 4.7500 | |
| Length | 8.0000 | |
| TYPE/COLOR | ARMORER’S TRAY AND PIN PUNCH | |
| SIZE/FINISH | PAIRS WITH APEX ARMORERS BLOCK | |
| MATERIAL | POLYMER | |
| OTHER FEATURES: | DESIGNED TO PAIR WITH THE | |
| APEX POLYMER ARMORER’S BLOCK, | ||
| (SOLD SEPERATLY), | ||
| CAPTURES PINS AND PARTS, | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
FEATURES:
-For use w/ Apex grade M&P barrels & other aftermarket M&P & Glock barrels
-Apex recommends using a 1/2″ safe edge file w/ the jig
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 0.85 X 3.65 X 5.05 | |
| Height | 0.8500 | |
| Width | 3.6500 | |
| Length | 5.0500 | |
| TYPE/COLOR | BARREL FITTING JIG | |
| SIZE/FINISH | FOR USE WITH M&P/GLOCK BARRELS | |
| MATERIAL | ALUMINUM | |
| OTHER FEATURES: | FOR USE WITH APEX GRADE M&P | |
| BARRELS AND OTHER AFTERMARKET | ||
| M&P AND GLOCK BARRELS | ||
| APEX RECOMMENDS USING A | ||
| 1/2″ SAFE EDGE FILE WITH | ||
| THE JIG-FILE IS NOT INCLUDED | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
The Apex Action Enhancement Kit for Gen-5 Glock pistols delivers a smoother trigger pull with reduced travel, reset, and overall weight while maintaining factory safety standards. The red anodized aluminum trigger bar and performance connector provide approximately 1 pound of pull reduction and a crisp break point. As a direct drop-in replacement, it requires no gunsmithing and is compatible with G17, G19, G19x, G26, G34, and G45 Gen-5 models.
Specs
- Fit: Glock G17, G19, G19x, G26, G34, G45 Gen-5
- Color: Red anodized
- Includes: Trigger bar and connector
- Pull Weight Reduction: Approximately 1 pound
- Features: Smooth uptake, reduced reset/travel
- Installation: Drop-in, no gunsmithing
- Safety: Factory-standard center pivot
- Model: 102-156
Questions about fitment or availability? Give the shop a call and we’ll walk you through it.
Apex’s drop-in spring kit reduces J-Frame trigger pull by approximately 3 pounds while maintaining factory safety margins. Direct replacement parts make installation simple on all modern centerfire J-Frames.
Specs
- Model Number: 103-106
- Trigger Pull Reduction: ~3 lbs
- Installation: Direct drop-in
- Components: Rebound slide spring, main spring, firing pin, FP return spring
- Compatibility: All modern centerfire S&W J-Frames except Bodyguard .38
- Safety Maintained: Yes, factory safety specs
- Material: Hardened steel
- Compatibility Note: Requires removable frame-mounted firing pin
Questions about fitment or availability? Give the shop a call and we’ll walk you through it.
Apex Tactical’s patented Forward Set Sear kit transforms the M&P trigger with roughly 50% less travel, allowing shooters to position their finger lower on the trigger face for increased leverage. The smooth, consistent pull mimics single-action fire while maintaining full reliability in Gen 1 and earlier M&P models.
Specs
- Compatibility: S&W M&P 9, 40 (NOT M2.0, Shield, or .22)
- Type: Drop-in trigger kit
- Design: Flat-faced forward set sear
- Pull Weight: 3-5 pounds (varies by spring set)
- Travel Reduction: Approximately 50% less pre-travel and over-travel
- Reset: Shortened
- Finish: Black
- Feature: Patented reduced reset and travel
Questions about fitment or availability? Give the shop a call and we’ll walk you through it.
Apex’s steel optic mount allows secure mounting of Aimpoint ACRO or Steiner MPS sights to any Glock MOS platform via the factory 1913 interface. Machined from billet steel with black oxide finish, it requires only a 15 in-lb torque spec and ships with all necessary hardware.
Specs
- Fits: Glock MOS (Gen 4 & 5 models)
- Compatible Optics: Aimpoint ACRO P-1/P-2, Steiner MPS, Lead & Steel Pandora PB-3
- Material: Billet steel
- Finish: Black oxide
- Interface: 1913 Picatinny
- Made In: Arizona, USA
Questions about fitment or availability? Give the shop a call and we’ll walk you through it.
FEATURES:
-Reduces trigger pull by 1lb for duty/carry applications
-Requires Larger 1/8″ sear plunger & spring
-Fits M2.0 9mm/40S&W & M&P 45
-Polymer trigger
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 1.15 X 3.55 X 3.80 | |
| Height | 1.1500 | |
| Width | 3.5500 | |
| Length | 3.8000 | |
| TYPE/COLOR | TRIGGER KIT | |
| SIZE/FINISH | FITS M2.0 9MM/40S&W/45 & M&P45 | |
| MATERIAL | KIT | |
| OTHER FEATURES: | REDUCES TRIGGER PULL BY 1LB | |
| FOR DUTY/CARRY APPLICATIONS, | ||
| REQUIRES LARGER 1/8″ SEAR | ||
| PLUNGER AND SPRING, | ||
| POLYMER TRIGGER, | ||
| DOES NOT FIT M&P SHIELD, | ||
| DOES NOT FIT M&P 9MM/.40S&W, | ||
| DOES NOT FIT BODYGUARD, | ||
| DOES NOT FIT M&P22, | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 0.70 X 3.00 X 4.20 | |
| Height | 0.7000 | |
| Width | 3.0000 | |
| Length | 4.2000 | |
| TYPE/COLOR | TRIGGER BAR | |
| SIZE/FINISH | 43/43X/48 | |
| MATERIAL | STEEL NICKEL TEFLON | |
| OTHER FEATURES: | DIRECT DROP-IN REPLACEMENT | |
| FOR GLOCK SLIM FRAME TRIGGER | ||
| BAR, SMOOTHER TRIGGER PULL DUE | ||
| TO LOW FRI NICKEL TEFLON | ||
| COATING | ||
| FITS ALL GLOCK MODELS 43/43X/ | ||
| 48, DOES NOT FIT FULLSIZE OR | ||
| LARGE FRAMES, DOES NOT FIT | ||
| G42, DOES NOT FUNCTION IN THE | ||
| PSA DAGGER MICRO | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
FEATURES:
-Reduces trigger pull by 2lbs
-Smooth uptake & reset
-Reduces reset length
-Reduces over-travel for duty/carry applications
-Fits M&P Shield 9mm/.40S&W
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 0.85 X 3.60 X 5.10 | |
| Height | 0.8500 | |
| Width | 3.6000 | |
| Length | 5.1000 | |
| TYPE/COLOR | TRIGER W/DUTY/CARRY ACTION KIT | |
| SIZE/FINISH | FITS M&P SHIELD 9MM/.40S&W | |
| MATERIAL | KIT | |
| OTHER FEATURES: | REDUCES TRIGGER PULL BY 2LBS, | |
| SMOOTH UPTAKE AND RESET, | ||
| REDUCES RESET LENGTH, | ||
| REDUCES OVER-TRAVEL | ||
| FOR DUTY/CARRY APPLICATIONS | ||
| FITS SHIELD 9MM/.40S&W | ||
| WILL NOT FIT SHIELD .45ACP | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
FEATURES
–Reduces pre-travel
-Reduces over-travel
-Reduces trigger pull
-Center mounted pivoting safety maintains factory safety values
-Fits Smith & Wesson M&P Shield 2.0 Pistols in 9mm & .40 Calibers
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 1.20 X 3.25 X 3.80 | |
| Height | 1.2000 | |
| Width | 3.2500 | |
| Length | 3.8000 | |
| TYPE/COLOR | TRIGER W/DUTY/CARRY ACTION KIT | |
| SIZE/FINISH | M&P SHIELD M2.0 9MM/.40S&W | |
| MATERIAL | KIT | |
| OTHER FEATURES: | REDUCES TRIGGER PULL BY 2LBS, | |
| SMOOTH UPTAKE AND RESET, | ||
| REDUCES RESET LENGTH, | ||
| REDUCES OVER-TRAVEL | ||
| FOR DUTY/CARRY APPLICATIONS | ||
| FITS SHIELD M2.0 9MM/.40S&W | ||
| WILL NOT FIT SHIELD .45ACP, | ||
| OR GEN 1 SHIELD | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
FEATURES:
-Reduces overall trigger travel by approximately 40%
-Reduces trigger pull weight by up to 2 lbs.
-Delivers crisp trigger break
-Smooths uptake & reset
-Reduces trigger over-travel
-Shortens reset length
-Center mounted pivoting safety maintains factory safety values
-Works w/ the Smith & Wesson M&P M2.0, including the Compact
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 1.15 X 3.45 X 3.80 | |
| Height | 1.1500 | |
| Width | 3.4500 | |
| Length | 3.8000 | |
| TYPE/COLOR | TRIGGER KIT FLAT FACED | |
| SIZE/FINISH | FITS M&P M2.0 | |
| MATERIAL | KIT | |
| OTHER FEATURES: | LOWERS TRIGGER WEIGHT TO | |
| 4LBS OR 6LBS DEPENDING ON | ||
| SPRINGS USED, | ||
| ALUMINUM TRIGGER | ||
| DOES NOT FIT M&P PISTOLS | ||
| EXCEPT 2.0, | ||
| DOES NOT FIT M&P SHIELD, | ||
| DOES NOT FIT BODYGUARD, | ||
| DOES NOT FIT M&P22, | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
FEATURES
–Reduces pre-travel
-Reduces over-travel
-Reduces reset
-Reduces trigger pull
-Delivers crisp trigger break
-Maintains factory safety values
-Fits Smith & Wesson M&P M2.0 models
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 1.15 X 3.80 X 3.80 | |
| Height | 1.1500 | |
| Width | 3.8000 | |
| Length | 3.8000 | |
| TYPE/COLOR | TRIGGER KIT FLAT FACED RED | |
| SIZE/FINISH | FITS M&P M2.0 ALL CALIBERS | |
| MATERIAL | KIT | |
| OTHER FEATURES: | LOWERS TRIGGER WEIGHT TO | |
| 4LBS OR 6LBS (2 SPRINGS), | ||
| RED ALUMINUM TRIGGER, | ||
| FITS ALL CALIBERS OF M2.0 | ||
| DOES NOT FIT M&P SHIELD, | ||
| DOES NOT FIT BODYGUARD, | ||
| DOES NOT FIT M&P22, | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 1.00 X 3.60 X 5.50 | |
| Height | 1.0000 | |
| Width | 3.6000 | |
| Length | 5.5000 | |
| TYPE/COLOR | TRIGGER KIT FLAT FACED RED | |
| SIZE/FINISH | FITS M&P M2.0 ALL CALIBERS | |
| MATERIAL | KIT | |
| OTHER FEATURES: | LOWERS TRIGGER WEIGHT TO | |
| 4LBS OR 6LBS (2 SPRINGS), | ||
| ADDITIONAL DECORATIVE FACE | ||
| CUTS ON THE VISIBLE SIDES OF | ||
| THE TRIGGER | ||
| RED ALUMINUM TRIGGER, | ||
| FITS ALL CALIBERS OF M2.0 | ||
| DOES NOT FIT M&P SHIELD, | ||
| DOES NOT FIT BODYGUARD, | ||
| DOES NOT FIT M&P22, | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
FEATURES:
-Reduces trigger pre-travel & over-travel by approximately 20%
-Smooth trigger face helps the shooter to place their finger on the center line of the trigger
-Center mounted pivoting safety maintains factory safety values
-Works w/ all Smith & Wesson M&P chambered in 9mm, .357SIG, .40S&W & .45ACP
-Polymer
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 0.95 X 3.10 X 4.70 | |
| Height | 0.9500 | |
| Width | 3.1000 | |
| Length | 4.7000 | |
| TYPE/COLOR | POLYMER TRIGGER | |
| SIZE/FINISH | FITS M&P9/40S&W/45 AND M2.0 | |
| MATERIAL | KIT | |
| OTHER FEATURES: | REDUCES PRE-TRAVEL AND | |
| OVER-TRAVEL BY 20%, | ||
| SMOOTH TRIGGER FACE, | ||
| CENTER MOUNTED PIVOTING | ||
| SAFETY | ||
| REQUIRES 1/8 SEAR BLOCK, | ||
| DOES NOT FIT M&P SHIELD, | ||
| DOES NOT FUNCTION WITH APEX | ||
| FORWARD SET SEAR AND TRIGGER | ||
| KITS | ||
| NO DIRECT SHIP TO CALIFORNIA | ||