Each plate is CNC machined from 6061-T651 aluminum and MIL-A-8625 Type III hard coat anodized. Standard Height Plate 13: Holosun 509T, HE509-RD

The Patented Arisaka Offset Scout Mount is designed specifically for the MCX Spear LT handguard, and is intended to be used with the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300, 600 and 18650 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter, reducing bulk and bringing the light in closer to the handguard. If mounted at the 3 or 9 o’clock m-lok slots, the mount closely hugs the handguard while also providing enough clearance for top rail mounted lasers like the ATPIAL-C, PEQ-15, DBAL-A2, and NGAL. The mount functions with the MAWL by flipping it over and attaching it to the angled m-lok slots, with the light sitting below. This mount also works well with the Aero Precision Enhanced Gen 2 handguards. The Offset Scout Mount provides three lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Three positions are provided, spanning approximately 0.240″. This allows for use next to most laser aiming devices. Compatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin and Odin Mini, CD REIN, and Arisaka 300, 600 and 18650 Series.

This Patented Arisaka Offset Scout Mount is designed specifically for the IWI Galil ACE Gen 2 and SIG MPX M-Lok handguard profiles. Surefire Scout and Scout clones attach directly to the mount, including the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300, 600, and 18650 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. When used on the side mounting surfaces of the Galil ACE Gen 2 and SIG MPX M-Lok handguards, the Offset Scout Mount places the light at a 30 degree angle to properly match the handguard, and tucks it in closer to the rail system. Oriented upwards, the light is located at approximately the 1:30 or 10:30 clock positions. This mount also works well with the Aero Precision Atlas R-One and S-One handguards. The Offset Scout Mount also provides three lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Three positions are provided, spanning approximately 0.240″. Compatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin, CD REIN, and Arisaka 300, 600, and 18650 Series.

Make Picatinny Great Again with the Patent Pending Arisaka Rail Slider. It transforms the Picatinny rail on your rifle into a multi-position sliding mount with a push button recoil lug. A unique detented knob is used to set sliding tension, accounts for out-of-spec rails, allows the mount to be removed or installed without having to slide it off the end of the rail, and can be quickly and easily tightened down for maximum precision. The Rail Slider features the ARMS 17S pattern for compatibility with popular bipods like the Atlas PSR, Atlas CAL, MDT Cyke, and Magpul 17S Bipod. The Rail Slider is CNC machined from stainless steel and MIL-A-8625 Type III hard coat anodized 6061-T651 aluminum. Includes two 10-32 socket cap screws. Requires a 5/32 Allen wrench for installation (not included). Recommended torque: 30 inch lbs.

The Arisaka QD Mount is a low profile design for M-Lok handguards. It features an anti-rotation interface and accepts all standard QD sling swivels, as well as the Geissele/ALG Defense forged QD sling swivel.

The Patented Arisaka Aimpoint Acro Mount Mk2 is designed for the Aimpoint Acro P1 and P2 optics, and will also function with other red dots using the same footprint like the Steiner MPS. The Arisaka Aimpoint Acro Mount Mk2 is available in 1.54″, 1.93″, and 2.26″ heights. 1.54″ is considered lower 1/3 co-witness, meaning standard AR height iron sights are visible in the lower 1/3 of the red dot optic lens. 2.26″ matches up with the Unity FAST FTC Magnifier Mount. AR height irons sights are visible through the window underneath the optic only with the 2.26″ Aimpoint Acro Mount Mk2.

The Patented Arisaka Aimpoint Micro Mount Mk2 is designed for the Aimpoint Micro T1 and T2 optics, and will also function with other red dots using the same footprint, including the Aimpoint H1/H2, Aimpoint Comp M5/M5S, Sig Romeo 4 and 5, Vortex Crossfire, and Holosun HS503/515/530. The Arisaka Aimpoint Micro Mount Mk2 is available in 1.54″, 1.93″, and 2.26″ heights. 1.54″ is considered lower 1/3 co-witness, meaning standard AR height iron sights are visible in the lower 1/3 of the red dot optic lens. 2.26″ matches up with the Unity FAST FTC Magnifier Mount. AR height irons sights are visible through the window underneath the optic only with the 2.26″ Aimpoint Micro Mount Mk2

The Arisaka Ring Light Mount provides a flexible yet secure way to attach handheld lights to your handguard. Available for KeyMod, M-Lok, and CMR interfaces, the vertically anchored ring system will accept light bodies with a diameter from 1.00″ to 1.03., A light can be installed and removed without having to take the mount off your handguard. The offset placement of the light while using the mount is designed to allow clearance with most front sights. For example, a 1.03″ light like the Surefire G2 will work with the Magpul Gen 2 MBUS on a Noveske NSR, which is one of the thinnest handguards at 1.48″ wide.

The Arisaka Side Scout Mount (SSM) is designed for use with Surefire Scout Lights, the Modlite PLH and OKW weapon lights, the Arisaka 300, 600 and 18650 Series, the Streamlight Protac Rail Mount lights, and the Olight Odin. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards, and tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear an NGAL and the QD lever on the Steiner DBAL I2, A3, and D2. Compatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin, CD REIN, and Arisaka 300, 600 and 18650 Series.

The Patented Arisaka Side Scout Mount (SSM) is designed for use with Surefire Scout Lights, the Modlite PLH and OKW weapon lights, the Arisaka 300, 600 and 18650 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount that tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear an NGAL and the QD lever on the Steiner DBAL I2, A3, and D2. Compatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), CD REIN, and Arisaka 300, 600 and 18650 Series.

This product is not compatible with the Protac 2.0 Rail Mount Lights. This adapter requires the use of a Surefire UE or DS tailcap to function, which is not included. The Arisaka Tailcap Adapter allows Streamlight Protac Rail Mount HL-X lights to use Surefire Scout tailcaps and remote switches. In particular, the Protac Rail Mount lights can now be used with the Surefire SR-D-IT and TNVC/Unity TAPS dual switches, which are commonly paired with laser/illuminators like the ATPIAL and DBAL series. One of the main flaws of the Protac Rail Mount lights is also addressed: Streamlight did not design a front battery spring into the light, so under recoil the battery can come off the front contact and cause the light to flicker or blink. To help prevent this behavior the adapter includes two different o-rings (one for CR123 cells, one for 18650 cells) which can be placed on the back end of the battery before screwing on the adapter. The o-ring ensures the battery cannot move rearward while firing. This adapter requires the use of a Surefire UE or DS tailcap to function. It also does NOT work with the Rail Mount HL-X Laser model.

The Arisaka Vertical Grip is a robust, minimal grip for M-Lok handguards. It features a radiused profile at the top which tapers to meet the mounting surface on the handguard, giving a low-profile feel and ergonomic comfort. Twin mounting screws ensure secure attachment. The grip is hollow, with no end-cap.

The Patent Pending Arisaka Vertical Grip is a robust, minimal grip for Picatinny handguards. It features a radiused profile at the top which tapers to meet the mounting surface on the handguard, giving a low-profile feel and ergonomic comfort. The grip is hollow, with no end-cap, and has no externally visible clamp hardware. Instead, it uses a unique recoil lug that extends from inside the part, providing a secure, rattle free lockup. The recoil lug and patched mating screw are captured and cannot fall out when the Vertical Grip is removed from the Picatinny rail.

The Patent Pending Arisaka Zero Retention Clamp (ZRC) greatly reduces zero shift for lasers and iron sights that are mounted on the handguard of the MCX Virtus and Spear LT. This version is designed for the MCX Virtus chambered in 5.56 and 300BLK, and the Spear LT chambered in 5.56, 7.62×39, and 300BLK. The Rattler is not currently supported. The MCX Virtus and Spear LT handguards are not adequately secured to the upper receiver. This allows the handguard to flex significantly, causing a laser or front sight zero to change when minor pressure is applied to the handguard. A shift of 5 mils or more is possible by pushing on the handguard with your support hand while the rifle is shouldered. Additionally, the zero does not always return to it’s original position once pressure is removed from the handguard. The Arisaka ZRC consists of exterior clamps that thread into a special U-bracket. The U-bracket engages the extended upper receiver underneath the handguard. This secures the handguard tightly to the upper receiver across two axis, greatly reducing or even eliminating zero shift. The U-bracket does not touch the barrel or gas system, preserving the free-floated barrel. The ZRC clamps are contoured to provide minimal interference with the user’s hands while gripping the handguard.