Blue Force Gear’s DDC Padded Bungee Single Point Sling is both fast and comfortable. It is constructed of Invista Cordura webbing with a 2-inch inline padding and bungee sections for extra comfort. The bungee has a travel of approximately 2-inches which is enough to absorb shock from movement or transitions but short enough to reduce the risk of facial injuries or sagging weapons. The overall length is adjustable, ambidextrous, and compatible with use over body armor. NOTE: It is not advised to connect the UDC Sling at the buttstock as this may hang the weapon too low for proper use.

The ULoop brings a level of versatility that is unmatched by any other sling hardware. Code named the “Uber Loop” it is a quick-detach version of our popular Universal Wire Loop offering even faster and easier installation especially on smaller eyelets found on AK HK SIG and FN weapons. The ULoop can be installed almost anywhere – through eyelets holes in railed handguards and on KeyMod rails. There’s no need to have multiple sling attachments. The ULoop replaces all hooks clips and connections.

Sling hooks and clips are on borrowed time! The world no longer has to tolerate loud jangly sling attachments hooks that eat up aluminum and plastic eyelets or hardware pieces that take too long to attach and remove. With the Patent Pending ULoop finally on the scene the hook and clip extinction event has begun.

The ULoop brings a level of versatility that is unmatched by any other sling hardware. Code named the “Uber Loop” it is a quick-detach version of our popular Universal Wire Loop offering even faster and easier installation especially on smaller eyelets found on HK SIG and FN weapons. The ULoop can be installed almost anywhere – through eyelets holes in railed handguards and on KeyMod rails. There’s no need to have multiple sling attachments. The ULoop replaces all hooks clips and connections.

The ULoop can be installed in seconds and does not need to be removed from the sling. To release the wire push the wire loop down towards the body. Then push the exposed crimp ball from the opposite side out of the locking channel. Pull the loose end of the cable out of the body. From there the wire can be inserted through eyelets loops on weapons holes or slots in rails / KeyMod. Simply push the loose end of the cable back into the ULoop body and snap the cable back into the locking channel.

The Universal Wire Loop is one of the most versatile sling attachment points made. A flexible nylon coated stainless steel wire allows for a sling attachment through eyelets, loops, slots, or any other opening that the wire fits through. The sling loop body is tumbled and bead-blasted for a non-reflective surface. The cable is installed with ball-shank ends. Fits- HK, AK, SIG, SCAR, or other eyelets. Fits around M16, M4 handguards. Can be mounted on the right hand side of AK’s for left handed shooters

The Molded Universal Wire Loop allows for a Vickers Sling or other slings 1.25 or thinner to attach to eyelets, slots, rail holes or other unique mounting points on weapons. The Molded UWL features the same military proven nylon coated air craft grade stainless steel cable crimped into a nylon 6-6 body. The inner features a push button socket for use with any standard push button sling swivel if desired. Fits HK, AK, SIG, SCAR or other eyelets. Allows the use of Push Button Sling Swivels or 1.25″ sling webbing. Sizing 2.55″ wire loop as measures from the base of the sling loop to the top of the loop, 1.25″ sling loop fits the Vickers Combat Applications Slings.

The ULoop brings a level of versatility to sling hardware. It is a quick-detach version of our popular Universal Wire Loop, offering even faster and easier installation, especially on smaller eyelets found on HK, SIG and FN weapons. The ULoop can be installed almost anywhere through eyelets, holes in railed handguards and on KeyMod rails. Theres no need to have multiple sling attachments. Fits HK, AK, SIG, SCAR or other eyelets. Can be mounted through holes in handguards and through KeyMod systems. Fits slings up to 1.25″ wide and also fits the Vickers Combat Applications Slings. All ULoops have 1″ wire loop as measured from the base of the sling loop to the top of the loop.

Combining Blue Force Gear’s polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both single and 2 point modes. Constructed similar to the worlds standard Vickers Combat Applications Sling, a RED Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221 Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. NOTE: For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket.

Blue Force Gear’s Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly. The sling is constructed of Invista solution dyed Cordura webbing with ITW GhilleTex Acetal hardware. A standard push button swivel and polymer molded Burnsed Socket are woven onto the allowing full adjustability. It is compatible with any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. This unpadded model has a Coyote Brown finish.

The Vickers Combat Applications Sling™ has recently been issued a National Stock Number by the Defense Logistics Agency. After extensive testing including combat evaluations this sling is now issued with the new USMC M27 Infantry Automatic Rifle and authorized for use with the M4 M4A1 and M16 series weapons. Read the full press release here.

The Patent Pending Vickers Combat Applications Sling has revolutionized the way the US military approaches combat slings and has ushered in the “post 3-point sling” era. Developed to meet the requirements of former 1st SFOD- Delta operational member Larry Vickers the Vickers Combat Applications Sling incorporates key details that set this sling apart from all others. Over 100000 Vickers Combat Applications Slings are used by America’s Finest across every branch of service.

The contrasting color pull tab on the custom quick adjuster can instantly change the length of the sling to convert from carrying to weapon to a shooting position and quickly back again. When tightened this amazing sling has no excess webbing tail springs or moving parts to fail or get tangled.

While a 2 point sling is ideal for most situations there are times like deploying from a vehicle or fighting in complex structures when a sing point sling has an advantage. Combining the polymer Burnsed Socket and patented RED Swivel the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both single and 2 point modes.

Lighter and slimmer – the Vickers ONE Sling. The Vickers ONE Sling offers all the features of the Vickers Combat Application Sling™ in a slimmer minimalist design creating a lighter and more versatile sling. For those with a lightweight rifle build or pistol caliber carbines this sling is for you. The Vickers ONE™ Sling utilizes 1” webbing and custom designed hardware to create a sling that functions as a Vickers Sling but at 23% less weight than the Vickers Sling.

Features:

Compatibility: Recommended for ultralight weight rifle builds or pistol caliber carbines
Installation: Secured with triglides through swivels loops or combined with sling hardware (non-Push Button Version). Push Button Version requires Two Push Button Sockets (front and rear of weapon)
Size: 1.00” sling webbing
Hardware Build: Nylon hardware: glass reinforced DuPont Zytel® Nylon
Sling Build: Invista solution dyed CORDURA® webbing
Length: Sling Length – 54” with the Adjuster tightened / 64” (fully extended)
Feature: One inch webbing. Patented Quick Adjuster with Contrasting Pull Tab

Features:

Compatibility: Recommended for ultralight weight rifle builds or pistol caliber carbines
Installation: Secured with triglides through swivels loops or combined with sling hardware (non-Push Button Version). Push Button Version requires Two Push Button Sockets (front and rear of weapon)
Size: 1.00” sling webbing
Hardware Build: Nylon hardware: glass reinforced DuPont Zytel® Nylon
Sling Build: Invista solution dyed CORDURA® webbing
Length: Sling Length – 54” with the Adjuster tightened / 64” (fully extended)
Feature: One inch webbing. Patented Quick Adjuster with Contrasting Pull Tab

YOU MUST BE 18 OR OLDER TO ENTER