YOU MUST BE 18 OR OLDER TO ENTER

The BCM 1913 Light modular Mount- KeyMod is designed for use on most common 1913-rail pistol/weapon light systems. It features multiple mounting holes for ideal placement, designed to mount on the 3 or 9 o’clock rail positions, fully ambidextrous and made to mount flush or cantilever off either the left or right side of the rail system. The light mount is constructed of aluminum and is intently designed to be low-profile and snag-free. Includes 1/8″ Hex and T15 Torx drive wrench.

Bravo’s BCM M4 Upper Receiver Assembly is precision machined to correct Mil-Specs from 7075 T6 forgings extension, providing the user with superior strength when dropped or when mortaring malfunction clearance drills. It has Mil-Std 1913 Rail for mounting optics and accessories, Mil-Spec forward assist with heat treated tool steel pawl, press fit and pinned cap, and a hard coat anodized finish. NOTE: Requires charging handle, barrel, handguard, gas block, muzzle device, gas tube and BCG (Bolt Carrier Group) to complete.

BCM RECCE-11 MCMR features a steel Government profile barrel with a manganese phosphate finish with a barrel length of 11.50″ with MOD 0 Compensator, aluminum receiver with a hard-coat anodized finish, M4 Feed Ramp Barrel Extension, M4 Feed Ramp Flat Top Receiver and fire controls marked SAFE and SEMI. Includes one magazine, cable lock, USGI Manual and FET. Made in the USA.

BCM RECCE 16 KMR-A features a steel Government profile barrel with a manganese phosphate finish with a barrel length of 16″ with MOD O Compensator, aluminum receiver with a hard-coat anodized finish, M4 Feed Ramp Barrel Extension, M4 Feed Ramp Flat Top Receiver and fire controls marked SAFE and SEMI. Includes one magazine, cable lock, USGI Manual and FET. Made in the USA.

FEATURES
–Forward rake gives positive retention when using “C-clamp” method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/out significant bulk adds just the right amount of relief to the wrist w/out substantially
increasing the girth of the handguard
-Small profile is just enough to get repeatable hand position on weapon forend
-Textured in front & back for positive engagement
-Black

FEATURES
-Black
-Gunfighter Angled Grip
-Fits Picatinny Rail 1913 Rail Version
-Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips
-Forward rake gives positive retention when using “C-clamp” (thumb over bore) method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/o significant bulk adds just the right amount of relief to the wrist w/o substantially increasing the girth of the handguard
-Small profile is just enough to get repeatable hand positon on weapon forend
-Innovative patent pending attachment method allows for robust clamping and alignment w/ minimal hardware and slender accessory size
-Textured in front and back for positive engagement
-Made in the U.S.A. from high quality, impact resistant polymers

FEATURES
–Forward rake gives positive retention when using “C-clamp” method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/out significant bulk adds just the right amount of relief to the wrist w/out substantially
increasing the girth of the handguard
-Small profile is just enough to get repeatable hand position on weapon forend
-Textured in front & back for positive engagement
-Flat Dark Earth

FEATURES
-Flat Dark Earth
-Gunfighter Angled Grip
-Fits picatinny 1913 rail version
-Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips
-Forward rake gives positive retention when using “C-clamp” (thumb over bore) method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/o significant bulk adds just the right amount of relief to the wrist w/o substantially increasing the girth of the handguard
-Small profile is just enough to get repeatable hand positon on weapon forend
-Innovative patent pending attachment method allows for robust clamping and alignment w/ minimal hardware and slender accessory size
-Textured in front and back for positive engagement
-Made in the U.S.A. from high quality, impact resistant polymers

FEATURES
-Wolf Gray
-Gunfighter Angled Grip
-Fits Picatinny 1913 rail version
-Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips
-Forward rake gives positive retention when using “C-clamp” (thumb over bore) method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/o significant bulk adds just the right amount of relief to the wrist w/o substantially increasing the girth of the handguard
-Small profile is just enough to get repeatable hand positon on weapon forend
-Innovative patent pending attachment method allows for robust clamping and alignment w/ minimal hardware and slender accessory size
-Textured in front and back for positive engagement
-Made in the U.S.A. from high quality, impact resistant polymers

Kit Includes:
-Extractor made to USGI specs (shot peened)
-Extractor pin
-BCM extractor spring (chrome silicon, heat treated & stress relieved, shot peened)
-3 USGI gas rings
-Crane Ind O-ring (Mil-Spec)
-Black extractor insert