The Breek Arms WARHAMMER MICRO MOD2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The smaller latches on the MICRO are for use when shooting with gear slings or barriers to avoid snagging. The total width of the latches measures 2.40" slightly wider than a standard charging handle width. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability!
The MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience especially when shooting suppressed!
- Material: 7075-T6 aluminum
- Fits all mil spec AR15/M16 Rifles
- Finish: Type III hard-coat anodized
- Perfect replacement for any factory charging handle
- Latches are also 7075-T6 aluminum
- Reduced size ambidextrous release levers on both sides 2.40" total width across the handles
- Set-Back Latches work great for large optics
- Allows for one handed manipulation
- Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses
- Weighs in just under 1 ounce!
- No gun smith required
- Made in America
Ultra-compact single-port design for the Plan B mounting system. The Breek Arms Plan B Echo Single-Port Muzzle Brake significantly reduces recoil and muzzle rise through 90° horizontal blast-vectoring ports —keeping your rifle flat fast and ready for seamless suppressor swaps.
- Weight: 2.3oz (223/556) 2.0oz (30 cal)
- Overall Length: 1.75"
- Material: 4140 Hardened Steel Nitride
- Thread Pitch: 1/2x28TPI (223/556) 5/8x24TPI (30 cal)
- Caliber: 223/5.56 30 cal
- Suppressor Mount: Plan B / Atlas
- Torque Spec: 20-30 ft lbs
- Peel Washer Included
- Designed & Manufactured in America
- Requires a 13/16" wrench to install
The HUB ONE is a Breek Arms universal suppressor mount designed to be used with Plan B Suppressor system available in two premium material options: ultra-light Grade 5 Titanium for weight-obsessed builds or rugged 17-4 Stainless Steel (H900).
Precision-manufactured with meticulous attention to detail the Breek Arms Plan B HUB One Universal Suppressor Mount preserves your rifle’s balance and maneuverability with minimal POI shift. It’s tough wear-resistant finish—Black DLC on titanium models or Nitride on stainless models—delivers exceptional hardness and corrosion resistance to thrive in heavy use and harsh conditions. The HUB ONE adds virtually no bulk or length to your suppressor maintaining a sleek low-profile silhouette while ensuring secure lockup and perfect alignment shot after shot—so you can trust your setup to be repeatable
Material Options:
- Grade 5 Titanium: Ultra-light at 1.0 oz with Black Diamond-Like Carbon (DLC) finish for superior hardness and low friction.
- 17-4 Stainless Steel (H900): Robust 2.1 oz construction with Nitride coating for excellent wear and corrosion resistance.
Key Features:
- Slim 0.70" × 1.49" profile – adds only ~1/4" to overall suppressor length
- Universal HUB threads (1.375 × 24)
- Compatible with any standard HUB-threaded suppressor and Plan B or Rearden Atlas muzzle devices
- Torque Spec: 35 ft lbs
- Requires a 1 -1/4" wrench to install
Compact low-profile 3-prong design engineered for the Plan B mounting system. Precision-machined prongs and internal flash-cutter threads disrupt and redirect muzzle blast for maximum flash reduction—no tuning-fork ping no carbon lock. Swap suppressors in seconds on any Plan B mount keep your barrel sleek and protect your night vision.
- Weight: 2.2oz (223/556) 1.8oz (30 cal)
- Overall Length: 1.75"
- Material: 4140 Hardened Steel Nitride
- Thread Pitch: 1/2x28TPI (223/556) 5/8x24TPI (30 cal)
- Caliber: 223/5.56 30 cal
- 9mm compatible (exit hole = 0.369 inches)
- Suppressor Mount: Plan B / Atlas
- Torque Spec: 20-30 ft lbs
- Peel Washer Included
- Designed & Manufactured in America
- Requires a 13/16" wrench to install
The Sledgehammer is the ultimate solution for enthusiasts and professionals seeking top-tier performance and unparalleled reliability especially when shooting suppressed. Crafted with precision this feature-rich charging handle offers reliable high performance at an approachable price point resulting in unmatched value for shooters.
Built using industry leading aerospace grade 7075-T6 aluminum the Sledgehammer combines rugged durability with unmatched functionality. The Sledgehammer features robust serrated latches for effortless and secure manipulation as well as a wider footprint for quick smooth operation in any situation.
With more gas-reducing features than any other charging handle on the market the Sledgehammer excels at porting gases away from the shooter's face. The unique design elements effectively mitigate excess gas pressure away from the shooter's face enhancing the shooting experience.
Specs:
- Material: 7075-T6 Aluminum
- Finish: Type III Hard-Coat Anodized
- Weight: 1.4 Oz
- Latch Width: 2.59”
- Fits DPMS Style AR-10 / LR-308 (see compatibility list below)
- No Gunsmithing Required
- Made in America
Gas Reducing Features:
- Higher raised shelf at the rear of the upper receiver to block gas from the shooters face
- Innovative keyway cutout to prevent gas from flowing over the rear shelf
- Patented Internal baffling inside the stem to create turbulence and slow gas expansion
- Back pressure port and aggressive relief cuts on the top and bottom to direct gases away from the shooter's face
The Sledgehammer is the ultimate solution for enthusiasts and professionals seeking top-tier performance and unparalleled reliability especially when shooting suppressed. Crafted with precision this feature-rich charging handle offers reliable high performance at an approachable price point resulting in unmatched value for shooters.
Built using industry leading aerospace grade 7075-T6 aluminum the Sledgehammer combines rugged durability with unmatched functionality. The Sledgehammer features robust serrated latches for effortless and secure manipulation as well as a wider footprint for quick smooth operation in any situation.
With more gas-reducing features than any other charging handle on the market the Sledgehammer excels at porting gases away from the shooter's face. The unique design elements effectively mitigate excess gas pressure away from the shooter's face enhancing the shooting experience.
Specs:
- Material: 7075-T6 Aluminum
- Finish: Type III Hard-Coat Anodized
- Weight: 1.1 Oz
- Latch Width: 2.59”
- Fits All Mil Spec AR15/M16 Rifles
- No Gunsmithing Required
- Made in America
Gas Reducing Features:
- Higher raised shelf at the rear of the upper receiver to block gas from the shooters face
- Innovative keyway cutout to prevent gas from flowing over the rear shelf
- Patented Internal baffling inside the stem to create turbulence and slow gas expansion
- Back pressure port and aggressive relief cuts on the top and bottom to direct gases away from the shooter's face
The Sledgehammer is the ultimate solution for enthusiasts and professionals seeking top-tier performance and unparalleled reliability especially when shooting suppressed. Crafted with precision this feature-rich charging handle offers reliable high performance at an approachable price point resulting in unmatched value for shooters.
Built using industry leading aerospace grade 7075-T6 aluminum the Sledgehammer combines rugged durability with unmatched functionality. The Sledgehammer features robust serrated latches for effortless and secure manipulation as well as a wider footprint for quick smooth operation in any situation.
With more gas-reducing features than any other charging handle on the market the Sledgehammer excels at porting gases away from the shooter's face. The unique design elements effectively mitigate excess gas pressure away from the shooter's face enhancing the shooting experience.
Specs:
- Material: 7075-T6 Aluminum
- Finish: Type III Hard-Coat Anodized
- Weight: 1.1 Oz
- Latch Width: 2.59”
- Fits All Mil Spec AR15/M16 Rifles
- No Gunsmithing Required
- Made in America
Gas Reducing Features:
- Higher raised shelf at the rear of the upper receiver to block gas from the shooters face
- Innovative keyway cutout to prevent gas from flowing over the rear shelf
- Patented Internal baffling inside the stem to create turbulence and slow gas expansion
- Back pressure port and aggressive relief cuts on the top and bottom to direct gases away from the shooter's face
The Trash Shield is a uniquely styled blast-forwarding device that redirects concussion noise and other “trash” downrange while giving your muzzle setup a distinctive look built to turn heads at the range.
Designed exclusively for use with HUB-compatible mounting systems (such as Plan B Breek LOK or any industry-standard HUB mount commonly used with suppressors). The Trash Shield effectively reduces side blast and felt concussion for the shooter and nearby operators. This makes it ideal for training environments team operations or indoor ranges where blast mitigation matters. When removed your muzzle device's full compensating performance returns instantly no tools required.
The Trash Shield is tough yet remarkably lightweight adding minimal length and virtually no noticeable weight to your build.
Key Features:
- HUB-compatible threading (1-3/8×24) – pairs seamlessly with Plan B Breek LOK and all standard HUB mounts.
- Engineered with aggressive ergonomic cuts delivering relentless grip without surrendering sleek aesthetics
- Redirects blast and concussion forward reducing side and rear exposure.
- Manufactured from lightweight 7075-T6 aluminum with a Type III anodized finish.
- Quick on/off design – switch between full muzzle performance and blast mitigation in seconds.
- Minimal added length and weight – adds only 2.25 inches and weighs just 2.5 oz.
Important Notes: The Trash Shield requires a separate HUB-compatible mounting device (not included). It is not a suppressor and does not reduce the overall decibel level of gunfire always wear proper hearing protection when shooting. When installed muzzle device compensation is reduced.
The AR-10 / LR-308 WARHAMMER MOD2 ambidextrous charging handle! The WARHAMMER is an incredibly affordable upgrade compared to other 308 charging handles in the market without sacrificing the quality that Breek Arms is proud of. The Warhammer will substantially increase the use of your .308 / 7.62 AR as an easy drop in upgrade. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The wide set-back latches work great for large optics. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability!
The MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience especially when shooting suppressed!
- Material: 7075-T6 aluminum
- Fits 308 AR Variants – See List Below
- Finish: Type III hard-coat anodized
- Perfect replacement for any factory charging handle
- Latches are also 7075-T6 aluminum
- Oversize ambidextrous release levers on both sides 2.78" total width across the handles
- Set-Back Latches work great for large optics
- Allows for one handed manipulation
- Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses
- Weighs in just over 1 ounce! (1.1oz)
- No gunsmith required
- Made in America
COMPATIBLE WITH
Aero M5 DPMS Gen1 High and Low Knights Armament SR25 STAG-10 Armalite AR10 Daniel Defense DD5 V3 V4 V5 and many others using DPMS Gen1 or Armalite AR10 platform.
NOT COMPATIBLE WITH
SIG716 Ruger SFAR Savage MSR10 Smith and Wesson M&P10 DPMS R-25 Gen II Colt LE901 Bushmaster BAR-10 RRA LAR-8 HK MR762 POF ROGUE AR-10/.308 or others using a DPMS Gen2 style upper.
The Breek Arms WARHAMMER Mod2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The wide set-back latches work great for large optics. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability!
The MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience especially when shooting suppressed!
- Material: 7075-T6 aluminum
- Fits all mil spec AR15/M16 Rifles
- Finish: Type III hard-coat anodized
- Perfect replacement for any factory charging handle
- Latches are also 7075-T6 aluminum
- Oversize ambidextrous release levers on both sides 2.78" total width across the handles
- Set-Back Latches work great for large optics
- Allows for one handed manipulation
- Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses
- Weighs in just under 1 ounce!
- No gun smith required
- Made in America