Purpose-built for modern bolt-action rifles while remaining fully capable on gas-operated platforms, the Stille 8.6 is a versatile suppressor engineered for hunters and precision shooters who demand maximum performance across large-caliber rifles. Designed from the ground up around bolt guns, it delivers exceptional signature reduction, balance, and consistency where it matters most-without limiting platform flexibility. Constructed from 3D-printed titanium, the Stille 8.6 prioritizes weight savings and durability, while an Inconel 718 blast insert and blast baffle dramatically increase service life by resisting erosion and high-pressure wear. Ships w/ B&T 5/8×24 Direct mount

Purpose-built for modern bolt-action rifles while remaining fully capable on gas-operated platforms, the Stille 300 is a versatile suppressor engineered for hunters and precision shooters who demand maximum performance. Designed from the ground up around bolt guns, it delivers exceptional signature reduction, balance, and consistency where it matters most-without limiting platform flexibility. Constructed from 3D-printed titanium, the Stille 300 prioritizes weight savings and durability, while an Inconel 718 blast insert and blast baffle dramatically increase service life by resisting erosion and high-pressure wear. Ships w/ B&T 5/8×24 Direct mount

Engineered for operators who value both maneuverability and advanced gas control, the Print-XH RBS SC Ti merges an ultra-compact 3-D printed titanium tube with a robust 718 Inconel blast baffle perfectly tailored for the higher pressure demands of 5.56 / .223 firearms.

SRBS Ti suppressors are the ideal choice when weight savings is priority No. 1. Forty-percent lighter than its 718 Inconel brethren, the SRBS Ti offers substantial weight savings, yet maintains the same high-performance you’ve come to expect from our slim line reduced backpressure system suppressors in a weight class all of its own, weighing in at just 7.2 ounces with a DM HUB and 12.1 ounces with the included Rotex-SF HUB assembly. SRBS 7.62 suppressors are magnum rated.

Print-X Impuls OLS Modular .45 ACP Suppressor raises the bar for lightweight durability and top-tier sound attenuation. Manufactured using advanced laser bed fusion and constructed entirely of titanium, this suppressor delivers superior reliability and noise reduction for your .45 ACP pistol. Ships with .57828 Impuls Device Engineered to fit most modern .45 ACP handguns sharing this common thread pattern.

The all-new MP5 SD-M suppressor offers the ultimate in modularity and customization for the integrally suppressed MP5 SD or first-generation APC9 SD submachine guns. The MP5 SD-M suppressor comes in one size yet offers three modular RBS-compatible sections that can be added or removed based upon end-user needs or mission requirements, allowing the suppressor to remain in a full-length configuration, compact or subcompact lengths. Further, two endcaps are included with the MP5 SD-M, one vented and the other non-vented.

Titanium Construction for Unmatched Performance Take theTP9 PDW/MP9 to the next level with the all-new Print-X TP9/MP9 Suppressor, now expertly built from 100% titanium to deliver a substantially lighter, tougher, and more corrosion-resistant design. Engineered as a proprietary fit for the TP9/MP9, this advanced suppressor sets a new benchmark for rapid deployment, enhanced shooter comfort, and reliable precision under any operational conditions.

Introducing the VERS36 Ti Suppressor by B&T is the lightest, strongest, and most versatile suppressor. Expertly manufactured from 100% titanium using advanced laser bed fusion, the VERS36 Ti delivers superior performance across pistols, submachine guns, and rifles without compromise. Its modular two-piece design lets you remove the front section for a shorter, lighter setup while still achieving exceptional sound reduction. Both configurations are full-auto rated, ensuring reliable performance under the toughest conditions. Plus, the Print-X VERS36 is compatible with a range of front caps and mounts. With ratings up to .338 LPM and 350 Legend, the Print-X VERS36 also covers .223 REM/5.56 NATO on barrels down to 10, .308 WIN/7.62 NATO on barrels down to 16, .300 WM on barrels down to 20, and .338 LM on barrels down to 18.

The hybrid Slim Reduced Backpressure System (SRBS) 7.62 Full-Length suppressor is ideally suited for use on short-barreled rifles with lower-tempo firing schedules. The SRBS Ti suppressors are the ideal choice when weight savings is priority number one. 40% lighter than its 718 Inconel brethren, the SRBS Ti offers substantial weight savings, yet maintains the same high-performance youve come to expect from our slim line reduced backpressure system suppressors in a weight class all of its own, weighing in at just 7 ounces with a DM HUB and 11.9 ounces with the included Rotex-SF HUB assembly. Ships with Rotex-SF Titanium HUB assembly

Created specifically for special units within the police and military sector, every gram of equipment counts during dynamic operations. The Impuls-OLS silencer has therefore been consistently designed for minimum weight with very good sound reduction. Based on the proven Impuls-IIA the Impuls-OLS is a very good choice not only for the mentioned user groups, but also for civilian users. It can be used on many different types of pistols, provided the same connection thread is used. The updated OLS-M comes in one size, yet offers a modular section that can be added or removed based upon end user mission requirements, allowing the suppressor to remain in a full-length configuration, or in a compact configuration, should the user choose compactness over maximum sound suppression.

The RBS9 SQD is an ingenious fusion of the reduced backpressure system (RBS) technology for which B&T is known for, and a totally new one-hand, 3-lug mounting system. The new RBS SQD suppressor will fit all 9mm weapons featuring a 3-Lug barrel interface. The spring-loaded retaining collar will snap down onto the 3-Lug attachment, automatically locking the suppressor into place. Two endcaps are included with the SQD-M, one vented and the other non-vented.

New 22 Suppressor is truly an all-a rounder. From small game hunting to target plinking, this ultra-lightweight suppressor is the ultimate addition to the 22 rimfire pistol or rifle.

Foregrip for the B&T TP9. Provides superior control and ergonomics.

15RD 9mm Magazine

19RD 9mm Magazine

B&T magazine for USW 30 (17+13) rounds cal. 9 x 19 mm

B&T Mounting Rail NAR Low Profile Mount. For HK MP5 and Aimpoint Micro-short version.

he NATO HUB is fully compatible with all 1.375x24TPI “HUB” compatible suppressors on the market today and is constructed of stainless-steel components. This HUB is compatible with all NATO-Spec A2 flash hiders and features a unique gate lock and ratchet system for redundant reliability and rock-solid fitment. The same suppressor attachment system is relied upon by NATO forces worldwide. The HUB version is simply threaded into compatible suppressors and snugged up with a spanner wrench. HUB assemblies can be semi-permanently attached using Rocksett or other thread locking compounds should the end user desire.

– Please ensure you intend to use this device on a NATO Spec Muzzle Device

Fully HUB Compatible (1.375x24TPI)
Constructed of Stainless Steel
NATO-Spec A2 Compatible
Attachment Interface Relied Upon by NATO Forces Worldwide
5.56x45mm & 7.62x51mm Compatible