Burris 1/2″ Picatinny Riser Mount provides 1/2 inch of additional mounting height for optimal sight alignment on tactical platforms.
Height: 0.5″ Length: 1.5″
These Burris XTR Xtreme Tactical Single Ring Aluminum Matte are high-quality rings known for reliability. The simple and proven design of these rings along with quality aluminum construction make them sturdy enough to mount a variety of optics accessories.
These Burris XTR Xtreme Tactical Single Ring Aluminum Matte are made for the tactical shooter who values lightweight mounts with good holding power. They will work with everything from smaller carbines to magnums and are also ideal for hunting rifles and muzzleloaders.
These Burris XTR Xtreme Tactical Single Ring Aluminum Matte are high-quality rings known for reliability. The simple and proven design of these rings along with quality aluminum construction make them sturdy enough to mount a variety of optics accessories.
These Burris XTR Xtreme Tactical Single Ring Aluminum Matte are made for the tactical shooter who values lightweight mounts with good holding power. They will work with everything from smaller carbines to magnums and are also ideal for hunting rifles and muzzleloaders.
These Burris XTR Xtreme Tactical Single Ring Aluminum Matte are high-quality rings known for reliability. The simple and proven design of these rings along with quality aluminum construction make them sturdy enough to mount a variety of optics accessories.
These Burris XTR Xtreme Tactical Single Ring Aluminum Matte are made for the tactical shooter who values lightweight mounts with good holding power. They will work with everything from smaller carbines to magnums and are also ideal for hunting rifles and muzzleloaders.
These Burris XTR Xtreme Tactical Single Ring Aluminum Matte are high-quality rings known for reliability. The simple and proven design of these rings along with quality aluminum construction make them sturdy enough to mount a variety of optics accessories.
These Burris XTR Xtreme Tactical Single Ring Aluminum Matte are made for the tactical shooter who values lightweight mounts with good holding power. They will work with everything from smaller carbines to magnums and are also ideal for hunting rifles and muzzleloaders.
The Burris Xtreme Tactical one-piece base offers the perfect mounting solution for precision shooters. The one piece construction provides greater strength and rigidity.
- Milled from a single piece of solid steel
- Compatible with all Weaver-style Picatinny-style rings
- Designed to work with both short and long actions
- Matte finish
The Burris Xtreme Tactical one-piece base offers the perfect mounting solution for precision shooters. The one piece construction provides greater strength and rigidity.
- Milled from a single piece of solid steel
- Compatible with all Weaver-style Picatinny-style rings
- Designed to work with both short and long actions
- Matte finish
The Burris Xtreme Tactical one-piece base offers the perfect mounting solution for precision shooters. The one piece construction provides greater strength and rigidity.
- Milled from a single piece of solid steel
- Compatible with all Weaver-style Picatinny-style rings
- Designed to work with both short and long actions
- Matte finish
The Burris Xtreme Tactical one-piece base offers the perfect mounting solution for precision shooters. The one piece construction provides greater strength and rigidity.
- Milled from a single piece of solid steel
- Compatible with all Weaver-style Picatinny-style rings
- Designed to work with both short and long actions
- Matte finish
The Burris Xtreme Tactical one-piece base offers the perfect mounting solution for precision shooters. The one piece construction provides greater strength and rigidity.
- Milled from a single piece of solid steel
- Compatible with all Weaver-style Picatinny-style rings
- Designed to work with both short and long actions
- Matte finish
The Burris Xtreme Tactical one-piece base offers the perfect mounting solution for precision shooters. The one piece construction provides greater strength and rigidity.
- Milled from a single piece of solid steel
- Compatible with all Weaver-style Picatinny-style rings
- Designed to work with both short and long actions
- Matte finish
When you use Burris Aluminum XTR Xtreme Tactical Double Rings you get the maximum amount of strength while maintaining a lightweight frame. The build is wide with six screws to allow for the highest amount of stability. The cross section is very thick aluminum providing the best return-to-zero mounting system.
This ultra-strong system is designed with Picatinny-style rails in mind. The rings are available in several sizes from _-inch to 1-inch thick. These are tactical rings and ready for your heaviest scopes toughest recoils and hard use.
When you use Burris Aluminum XTR Xtreme Tactical Double Rings you get the maximum amount of strength while maintaining a lightweight frame. The build is wide with six screws to allow for the highest amount of stability. The cross section is very thick aluminum providing the best return-to-zero mounting system.
This ultra-strong system is designed with Picatinny-style rails in mind. The rings are available in several sizes from _-inch to 1-inch thick. These are tactical rings and ready for your heaviest scopes toughest recoils and hard use.
When you use Burris Aluminum XTR Xtreme Tactical Double Rings you get the maximum amount of strength while maintaining a lightweight frame. The build is wide with six screws to allow for the highest amount of stability. The cross section is very thick aluminum providing the best return-to-zero mounting system.
This ultra-strong system is designed with Picatinny-style rails in mind. The rings are available in several sizes from _-inch to 1-inch thick. These are tactical rings and ready for your heaviest scopes toughest recoils and hard use.
When you use Burris Aluminum XTR Xtreme Tactical Double Rings you get the maximum amount of strength while maintaining a lightweight frame. The build is wide with six screws to allow for the highest amount of stability. The cross section is very thick aluminum providing the best return-to-zero mounting system.
This ultra-strong system is designed with Picatinny-style rails in mind. The rings are available in several sizes from _-inch to 1-inch thick. These are tactical rings and ready for your heaviest scopes toughest recoils and hard use.
Xtreme Tactical Rings were built to withstand brutal use from competitors and tactical operators. They are lightweight have plenty of holding power and can endure any amount of recoil.
- Fits on most Weaver and all Picatinny-style mounts
- Available in a variety of sizes
- Ideal for tactical use
- Also great for hunting rifles slug guns and muzzleloaders
- 1-in. and 30 mm models are made of aluminum for optimum weight savings
- Quick-detach models available
- 1/2-in. Picatinny Risers are available for extra height and better sight alignment
Xtreme Tactical Rings were built to withstand brutal use from competitors and tactical operators. They are lightweight have plenty of holding power and can endure any amount of recoil.
- Fits on most Weaver and all Picatinny-style mounts
- Available in a variety of sizes
- Ideal for tactical use
- Also great for hunting rifles slug guns and muzzleloaders
- 1-in. and 30 mm models are made of aluminum for optimum weight savings
- Quick-detach models available
- 1/2-in. Picatinny Risers are available for extra height and better sight alignment
Burris Xtreme Tactical Rings were built to withstand brutal use from competitors and tactical operators. They are lightweight have plenty of holding power and can endure any amount of recoil.
- Fits on most Weaver and all Picatinny-style mounts
- Available in a variety of sizes
- Ideal for tactical use
- Also great for hunting rifles slug guns and muzzleloaders
- 1-in. and 30 mm models are made of aluminum for optimum weight savings
- Quick-detach models available
- 1/2-in. Picatinny Risers are available for extra height and better sight alignment
Burris Xtreme Tactical Rings were built to withstand brutal use from competitors and tactical operators. They are lightweight have plenty of holding power and can endure any amount of recoil.
- Fits on most Weaver and all Picatinny-style mounts
- Available in a variety of sizes
- Ideal for tactical use
- Also great for hunting rifles slug guns and muzzleloaders
- 1-in. and 30 mm models are made of aluminum for optimum weight savings
- Quick-detach models available
- 1/2-in. Picatinny Risers are available for extra height and better sight alignment
The Burris 2-Piece XTB Xtreme Weaver-Style solid steel base is able to fit either Picatinny-style or Weaver-style rings. These bases are hand polished and carefully inspected to ensure you get the highest quality. They are comprised of solid steel and are precision machined.
The Burris 2-Piece XTB Xtreme Weaver-Style Solid Steel Base is able to fit either Picatinny-style or Weaver-style rings. These bases are hand polished and carefully inspected to ensure you get the highest quality. They are comprised of solid steel and precision machined.
These Burris 2-Piece XTB Xtreme Weaver-Style bases are constructed to offer the highest level of flexibility for your rifle mount as well as stability. Attaching these platforms are easy and taking them back off is not difficult either.