Canik METE Optic Plates. Canik METE are an excellent out of the box platform with superior qualities for avid shooters. From the factory they include polymer optic adapters and Calculated Kinetics found it necessary to offer these in aluminum. Not only that, but they also made plates to accommodate full size optics. All plates will come hard anodized black.

Calculated Kinetics Canik Rival/Rival SFX/Rival Steel/TP9 Full size/Elite Combat/Executive Combat to any Holosun K or RMSc Footprint optic (EPS, Mecanik M04, EPS Carry, 407k, 507k and any RMSc Footprint) DOGTAG Optic Plate is a better than OEM mounting solution, built in deflection table to prevent carbon build up, and allow for single hand manipulation. Also incorporated in the DOGTAG is Rear iron sights that will give a lower 1/5th co witness with most optics. Hardware, Torx Bit, Vibratite, and Install Card included.

CZ Firearms has become increasingly popular for a great quality firearm at a great price in the US. The demand for optic plates has increased significantly, so the time has come to start to producing. Compatible with all OEM CZ P10 Optics Ready Models. Machined out of 7075 aluminum then hard anodized to last a lifetime. All hardware, Torx Bits, and Vibratite are included to complete the installation.

Calculated Kinetics CZ P10 and Shadow 2 Compact/Full to K Footprint to RMSc Footprint DOGTAG Optic Plate is duty rated to withstand the abuse required by any application. These plates fit a K Footprint and RMSc Footprint and CZ P10 and Shadow 2 Compact/Full. Hardware, Torx Bit, Vibratite, and Install Card included. Will not fit the CZ Shadow 2 Carry.

Glock MOS Optic Plate can be manufactured by many, but only Calculated Kinetics have the DOGTAG. The DOGTAG is an anodized multifaceted mount plate that provides protection and reduces carbon build up on the glass using a gas deflection table on the front, this is especially noticed when running suppressed. The DOGTAG also reduces the amount of space between the optic and the slide, securing the optic to prevent any movement and removing the possibility of the red dot shifting off zero. Finally, the deflection table also doubles as an action point in the event of single hand operation (say in the event of an injury), the table can be used to perform the action versus the optic and preventing damage to the optic. All adapters, optic plates, and DOGTAGs come with all the necessary hardware, Torx bit to install, Vibratite, and an install card to complete the job.

Calculated Kinetics Springfield Armory Echelon to EPS DOGTAG will allow you to run the Holosun EPS and EPS Carry utilizing a modified RMSc footprint. This plate has full recoil lugs and will still allow you to co-witness with OEM sights. Hardware, Torx Bit, Vibratite, and Install Card included.

Gen 6 Optic Plates are in high demand! With Glocks new Gen 6 and the Optic Ready System (ORS) it is definitely something unique. Calculated Kinetics believes that their DOGTAGs will only make the system that much better.

Calculated Kinetics for Glock MOS to ACRO DOGTAG Optic Plate has a built in deflection table and is duty rated to withstand the abuse required by any application. The DOGTAG deflection tables are brought back closer to the optic to allow for most duty holster compatibility. These plates fit any ACRO Footprint and Glock MOS 9MM ONLY slides. Hardware, Torx Bit, Vibratite, and Install Card included.

Calculated Kinetics Glock MOS to Holosun EPS (K Footprint) DOGTAG Optic Plate has a built in deflection table and is duty rated to withstand the abuse required by any application. The DOGTAG deflection tables are brought back closer to the optic to allow for most duty holster compatibility. These plates fit any Holosun EPS and Glock MOS 9MM ONLY slides. Hardware, Torx Bit, Vibratite, and Install Card included.

Calculated Kinetics SIG Romeo 1 Pro Cut W/RMR Holes to any RMR Footprint optic. Optic Plate is duty rated to withstand the abuse required by any application. These plates fit any RMR Footprint and any SIG Romeo 1 Pro Cut With RMR holes that have 2 channels on the milled space. Hardware, Torx Bit, Vibratite, and Install Card included. Fits P211 GTO and P320 with RMR holes.

Springfield Prodigy Optic Plates. The Springfield Prodigy is an affordable out of the box platform with great qualities for recreational shooters and competitors alike. From the factory they include the Agency Optic System and Calculated Kinetics found it necessary to offer these plates as an upgrade.

Calculated Kinetics Smith and Wesson M&P 2.0 to Trijicon SRO/RMR HD DOGTAG Optic Plate has a built in deflection table and is duty rated to withstand the abuse required by any application. The DOGTAG on this specific setup is providing an 80% reduction in carbon buildup on the optic frontal lens allowing for cleaner, clearer shooting. These plates fit the Trijicon SRO and Smith and Wesson M&P 2.0 (will not work for 1.0). Hardware, Torx Bit, Vibratite, and Install Card included.

M&P 2.0 Optic Plates made by Calculated Kinetics are a great upgrade from the factory provided plates. Tighter tolerances, better screws, and a built-in deflection table to reduce carbon by 75% why would you get any other optic plate?

Calculated Kinetics Smith and Wesson M&P 2.0 to any RMR Footprint optic (Trijicon RMR, Holosun 407c, 507c, 507 Comp, Swampfox. Will not work for the SRO or other forward facing optics) DOGTAG Optic Plate has a built in deflection table and is duty rated to withstand the abuse required by any application. The DOGTAG deflection tables are brought back closer to the optic to allow for most duty holster compatibility. These plates fit any RMR Footprint (except SRO or other forward facing optics) and Smith and Wesson M&P 2.0 (will not work for 1.0). Hardware, Torx Bit, Vibratite, and Install Card included.

Long overdue, but it’s time Calculated Kinetics provides the 1911 DS and 2011 with some DOGTAGs. The new Staccato HD is the perfect line to enter the realm of the industry. With the name that proceeds Staccato, it was only appropriate to make a high-quality plate to pair with the caliber of the Staccato. Just like Staccato had Law Enforcement Officers in mind with this line, so did Calculated Kinetics. With experience in providing equipment for over 250 law enforcement agencies, their worked with their subject matter experts as well as those from Safariland to create a DOGTAG for the HD that was duty holster compatible. Even if you’re not a Law Enforcement Officer but want a robust plate, that is all inclusive and won’t break the bank? Calculated Kinetics has you covered.

Calculated Kinetics Walther PDP 2.0 and F Series to any Holosun K Footprint and RMSc optic (EPS, EPS Carry, 407k, 507k and any RMSc Footprint) DOGTAG Optic Plate has a built in deflection table and is duty rated to withstand the abuse required by any application. The DOGTAG deflection tables are brought back closer to the optic to allow for most duty holster compatibility. These plates fit any Holosun K Footprint and RMSc footprint to Walther PDP 2.0 and F Series combination (will not work for 1.0). Hardware, Torx Bit, Vibratite, and Install Card included.

Walther PDP is the ideal firearm for those seeking unmatched versatility, dependability, and effectiveness in both concealed carry and conventional service situations, the Walther PDP is how you stay ready.