Lead shot Steel Shot Copperplated Shot Nickel Shot Hevi-Shotshells and Buck Shot can be used in our Sporting Clay Choke Tubes. Steel shot larger than BB should not be used in any Sporting Clays Choke Tube tighter than Full Constriction. Carlson's Sporting Clays Choke Tubes will throw tighter/denser patterns than Flush Mount Choke Tubes due to a longer parallel section.
Lead shot Steel Shot Copperplated Shot Nickel Shot Hevi-Shotshells and Buck Shot can be used in our Sporting Clay Choke Tubes. Steel shot larger than BB should not be used in any Sporting Clays Choke Tube tighter than Full Constriction. Our Sporting Clays Choke Tubes will throw tighter/denser patterns than Flush Mount Choke Tubes due to a longer parallel section
Federal's Black Cloud ammunition features devastating penetration which can now be delivered with unique features that help downrange performance increasing hunter success.
The Extended tube is constructed of a Titanium-coated steel and comes in Mid Range and Long Range models. The titanium coating helps the uniquely designed FliteControl Wad in the Black Cloud ammunition perform downrange with less build-up in the choke and allows the Flitestopper shot to do its job this increasing your take in the field.
These chokes are specifically designed to get the most performance from Federal's new Black Cloud Ammunition but perform extremely well with other steel shotshells. The Long Range choke tube should not be used with any steel shot larger than BB or with any steel shot faster than 1550 fps. The Mid Range model can be used with all steel shot sizes.
The Mid Range model can be used with all steel shot sizes and with ammunition that exceeds 1550 fps. Black Cloud ammunition has been designed to be used with choke tubes that do not use porting or wad stopping devices.
This choke is backed by Carlson's lifetime warranty.
- AMBIDEXTROUS – provides easy cocking for left or right hand at all times
- ONE SIZE FITS ALL T.C. Contenders and most exposed hammer firearms: rifles shotguns handguns
- EASY INSTALLATION
- BALANCED & LIGHTWEIGHT – helps prevent uneven wear of trigger and sear surfaces
- KNURLED BODY – affords positive non-slip cocking
- Use with or without telescopic sights
- HARD ANODIZED FINISH – available in black or silver
- Lifetime warranty! Proudly made in the USA with the finest materials available!
These Brass Wool snap caps have a spring loaded primer plunger which prevents firing pin damage during dry-firing exercises. Treat the wool chamber mop with your favorite gun oil to prevent rusty chambers during storage. NOTE: leaving guns cocked during storage is hard on springs and is dangerous. These will help keep your shotgun in good condition. 2 per pack.
CARLSONS SNAP CAPS ALUMINUM 20GA
For use with Hevi-Shot Bismuth or lead this high performance choke tube has been specifically designed for the coyote hunter to deliver devastating downrange patterns upwards of 70 yards when shooting larger shot sizes. Produces very dense patterns when ultilizing T and Buckshot loads. Great for waterfowl and predator hunting.
Not for use with steel shot.
The Carlson's Coke Tubes Coyote Choke Tubes are made specifically with coyote hunters in mind allowing predator hunters to deliver devastatingly effective patterns at distances of 70 yards and more with larger sized shot. Made for use with Hevi-Shot Bismuth or lead the Carlsons Coyote Choke Tubes are high performance chokes that produce very dense patterns when utilizing T and Buckshot loads. The Carlson's Coyote Shotgun Choke Tubes are great for waterfowl and predator hunting and are available to fit a variety of shotgun models.
Note: these choke tubes are NOT FOR USE WITH STEEL SHOT!
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.
To fit Winchester Browning Invector Mossberg 500 Weatherby Pre 1993 Ruger Red Label. Winchester SX-2SX-3 & SXP use Browning Invector Plus tubes
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.
To fit Winchester Browning Invector Mossberg 500 Weatherby Pre 1993 Ruger Red Label. Winchester SX-2SX-3 & SXP use Browning Invector Plus tubes
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator® Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.
Extended Range Steel Shot Choke Tubes – for taking shots 40 yards and up. Our best patterning long range choke tube.
Carlson's new line of steel shot choke tubes pattern steel shot extremely well. These choke tubes feature a longer parallel section allowing for less flyers and denser patterns. These choke tubes extend 3/4 " outside the barrel eliminating damage to your barrel caused by prolonged steel shot use. The longer parallel section allows for use of larger steel shot in tighter choke constrictions. They are made of 17-4 stainless with a knurled extension and a blue finish. Each choke tube carries a lifetime warranty. All steel shot sizes may be used in the close and mid-range choke tubes. Do not use steel faster than 1550 FPS or steel shot sizes larger than BB through the Long Range choke tube.
To fit Winchester Browning Invector Mossberg 500 Weatherby Pre 1993 Ruger Red Label. Winchester SX-2SX-3 & SXP use Browning Invector Plus tubes
To fit Winchester Browning Invector Mossberg 500 Weatherby Pre 1993 Ruger Red Label. Winchester SX-2SX-3 & SXP use Browning Invector Plus tubes
Carlson's Waterfowl Extended Choke Tubes are manufactured from 1704 stainless steel and designed to throw tighter and denser patterns than conventional choke tubes. These choke tubes feature a 25% longer parallel section in the choke thus throwing more consistent patterns. Each choke tube is knurled on the end to allow for quick and easy removal. Each choke tube has the constriction and size laser marked on the end and body for easy reference. Steel shot may be used through these choke tubes with exceptional results. Do not shoot steel shot larger than BB or any steel load faster than 1550 FPS through the Long Range Constriction. Loads that exceed this size and speed should be used with the Mid Range choke tube. These chokes are backed by Carlson's lifetime warranty.
Mid Range Extended Steel Shot Choke Tubes – for those situations where you are shooting 25 to 40 yards.
Carlson's new line of steel shot choke tubes pattern steel shot extremely well. These choke tubes feature a longer parallel section allowing for less flyers and denser patterns. These choke tubes extend 3/4 " outside the barrel eliminating damage to your barrel caused by prolonged steel shot use. The longer parallel section allows for use of larger steel shot in tighter choke constrictions. They are made of 17-4 stainless with a knurled extension and a blue finish. Each choke tube carries a lifetime warranty. All steel shot sizes may be used in the close and mid-range choke tubes. Do not use steel faster than 1550 FPS or steel shot sizes larger than BB through the Long Range choke tube.
To fit Winchester Browning Invector Mossberg 500 Weatherby Pre 1993 Ruger Red Label. Winchester SX-2SX-3 & SXP use Browning Invector Plus tubes
Made from 17-4 heat treated stainless steel these chokes are for Remington (Rem Choke) shotguns.
- Steel Lead & Hevi-Shot may be used in all constrictions with the exceptions listed below.
- No Steel shot larger than #BB or speeds exceeding 1550 fps should be used in choke tubes tighter than full.
- No Steel Shot Larger than #4 may be used in our Turkey Choke Tubes.
These choke tubes are backed by Carlson's Lifetime Warranty and Made in the USA!
- Reduces muzzle jump
- Less recoil
- Designed to tighten your patterns
- Tightens shot patterns
- Efficient at long or short distances