The CGS Hyperion 762 is a precision rifle silencer designed specifically with 7.62 mm ammunition in mind, up to and including 300 RUM. The patent pending proprietary technology unique to CGS Group LLC rifle silencers is unlike anything the firearms industry has ever seen before. This unique design allows for peak sound reduction and extreme reduction in flash signature as well as minimal and repeatable point of impact shift. This suppressor uses a “tubeless” circumferentially welded design for maximum strength and durability while maintaining light weight.

The Mod9 utilizes second generation Orion baffles for the best available sound reduction. It uses special cut pistons to limit first round pop. The baffles and the shroud shield the tube from carbon and debris allowing for easy cleaning. The suppressor is easy to take apart and to clean using the included disassembly tool.

The CGS Helios DT is a short rifle silencer designed specifically for 5.56mm rifles. The patent pending proprietary technology unique to CGS Group LLC rifle silencers is unlike anything the firearms industry has ever seen before. This unique design allows for peak sound reduction for its size and reduction in the flash signature as well as minimal and repeatable point of impact shift. The Helios DT suppression system provides for the maximum possible sound suppression in the industry. It uses a “tubeless” circumferentially welded design for maximum strength and durability. This silencer is excellent for maneuverability in confined areas while retaining hearing safe sound reduction.

The CGS HELIOS QD Ti is a short, quick attach rifle silencer designed specifically for 5.56mm rifles and carbines. The patented Varying Core Diameter technology unique to CGS Suppressors is unlike anything the firearms industry has ever seen before. This unique design allows for peak sound reduction for its size and elimination of the flash signature as well as consistent, minimal and repeatable point of impact shift. The HELIOS QD Ti utilizes a full DMLS Grade V Titanium construction for maximum strength, light weight, and extreme durability. The HELIOS QD Ti system was designed to be extremely versatile. The generous .36 bore significantly reduces back pressure and muzzle flash while also allowing the suppressor to be used with multiple calibers. The HELIOS QD Ti comes with a 1/228 threaded rear cap, a 5/824 threaded rear cap, and an adapter ring threaded in 1.37524 to accept a plethora of industry QD mounting solutions. The interchangeable rear caps are complimented with interchangeable front caps as well. The HELIOS QD Ti is full auto rated with a 10 minimum barrel length restriction for 5.56mm and will handle larger calibers up to and including 300 Norma Magnum.

MOD 9X uses special cut pistons to limit first round pop. The baffles and the shroud shield the tube from carbon and debris allowing for easy cleaning. Shorter overall length provides for better maneuverability and less weight at the end of the firearm. Piston allows for 12 points of adjustment for impact shift. Easy to take apart and clean using the included disassembly tool.

The CGS SCI-Six is optimized specifically for the 5.56x45mm cartridge, the CGS SCI-Six prioritizes backpressure, sound, and flash reduction. With gas, flash, and sound cut down alongside weight and length, the CGS SCI-Six is a top choice for the discerning 5.56 user. Thi suppressor limits the gas coming back into the action, keeping rifles running clean and smooth while also dampening recoil and decibels. And if low light is a concern, the SCI-Six has you covered with its flash hiding end cap. Noise reduction and recoil management are excellent, making this suppressor an easy pick for shooters who want to optimize their 5.56 rifle build.

The CGS STI SIX is a centerfire rifle suppressor designed for compatibility with 5.56 and 6 ARC platforms. It is engineered without barrel length restrictions, allowing use across a wide range of host weapons chambered in this caliber. The STI SIX measures 6.5 inches in overall length and features a primary diameter of 1.64 inches. The included mount contributes an additional 1.125 inches to the system length. The main suppressor body is manufactured from titanium using additive manufacturing (DMLS 3D printing), a process selected for its ability to produce consistent internal geometry and reduce overall weight. The suppressor body weighs approximately 9.3 ounces, and the complete system weight with the included flash hider mount is 11.3 ounces.