Features:
- LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum Type III Hard Coat Anodized
- UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum Type III Hard Coat Anodized
- BARREL: Chrome Moly Vanadium Steel Cold Hammer Forged 1:7 Twist 16? Government Profile Mid-length Gas System Chrome Lined Mil-Spec Heavy Phosphate Coated and HP/MPI Tested
- GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating Mid-length Direct Impingement
- MUZZLE DEVICE: Daniel Defense Flash Suppressor 17-4 PH Stainless Steel Salt Bath Nitride Finished
- BOLT CARRIER GROUP: M16 Profile Mil-Spec MP Tested Chrome Lined Properly Staked Gas Key
- BUFFER: H Buffer
- SIGHTS: Sold Separately
- HANDGUARD: Daniel Defense MFR 15.0 CNC Machined of 6061-T6 Aluminum M-LOK Attachment Type III Hard Coat Anodized
- CHARGING HANDLE: GRIP-N-RIP Charging Handle Body CNC Machined of 7076-T6 Aluminum Handles & Latch CNC Machined of 6061-T6 Aluminum Heavy Duty Stainless Steel Roll Pins Type III Hard Coat Anodized
- RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
- BUTTSTOCK: Daniel Defense Buttstock Glass Filled Polymer with Soft Touch Overmolding
- PISTOL GRIP: Daniel Defense Pistol Grip Glass Filled Polymer with Soft Touch Overmolding
- Made in the USA!
Specifications:
- Mounting System: M-LOK
- Caliber: 5.56mm NATO
- Muzzle Thread: 1/2×28 TPI (Threads Per Inch)
- Gas System: Mid-length
- Barrel Length: 16"
- Barrel Profile: Government
- Product Weight: 6.2 LBS
- Length: 32 ¼” – 35 7/8”
- Magazine: DD Magazine
- Case: Daniel Defense Full-Latch Impact Plastic Case
- Manufacturer: Daniel Defense
Features:
- LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum
- UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum
- BARREL: Chrome Moly Vanadium Steel Cold Hammer Forged 1:7" Twist 14.5? Lightweight Profile Chrome Lined Mil-Spec Heavy Phosphate Coated and HP/MPI Tested
- GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating Mid-length Direct Impingement
- MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor Extended 17-4 PH Stainless Steel Salt Bath Nitride Finished
- BOLT CARRIER GROUP: M16 Profile Mil-Spec MP tested Chrome Lined Properly Staked Gas Key
- BUFFER: H Buffer
- SIGHTS: Sold Separately
- HANDGUARD: Daniel Defense MFR 13.5" CNC Machined of 6061-T6 Aluminum M-LOK Attachment Type III Hard Coat Anodized
- CHARGING HANDLE: GRIP-N-RIP Charging Handle Body CNC Machined of 7076-T6 Aluminum Handles & Latch CNC Machined of 6061-T6 Aluminum Heavy Duty Stainless Steel Roll Pins Type III Hard Coat Anodized
- RECEIVER EXTENSION: 6-Position Mil-Spec 7075-T6 Aluminum
- BUTTSTOCK: Daniel Defense Buttstock Glass Filled Polymer with Soft Touch Overmolding
- PISTOL GRIP: Daniel Defense Pistol Grip Glass Filled Polymer with Soft Touch Overmolding
- Made in the USA!
Specifications:
- Mounting System: M-LOK
- Caliber: 5.56mm
- Muzzle Thread: 5?8×24 TPI (Threads Per Inch)
- Barrel Length: 14.5"
- Barrel Profile: Lightweight
- Product Weight: 5.9a
- Length: 44" Max
- Magazine: Magpul PMAG 5 7.62 AC
- Case: Daniel Defense Full-Latch Impact Plastic Case
- Manufacturer: Daniel Defense
The Daniel Defense Flash Suppressor is designed to reduce muzzle flash. Manufactured from aerospace 17-4 stainless steel and salt bath nitride finished there's minimal chance of corrosion. The Daniel Defense Flash Suppressor comes in extended length and 1/2 x 28 TPI or 5/8 x 24 TPI.
- Thread: 1/2 x 28 TPI
- Length: Extended (2.25")
- Made in the USA!
Daniel Defense’s extended flash hider is machined from aerospace-grade 17-4 stainless steel and salt bath nitride finished to resist corrosion. The rotationally symmetric design works on ARs with 1/2×28 threading like the Saint or most mid-length rifles. Low profile and effective at reducing muzzle flash in tactical environments.
Specs
- Thread Pattern: 1/2×28
- Material: 17-4 stainless steel
- Finish: Salt bath nitride
- Type: Flash suppressor
- Weight: 2.4 oz
- Length: Extended 2.25 inches
- Design: Rotationally symmetric
- Warranty: 100% satisfaction guarantee
Questions about fitment or availability? Give the shop a call and we’ll walk you through it.
Some firearms aren't just rare — they're legendary. The GL/SSC is both. The original was so unobtainable that only 25 ever reached civilian hands — and even then builders went to extraordinary lengths just to get close.
Now for the first time it's available to the general public. The GL/SSC is built around a 12.5" Cold Hammer Forged Government profile barrel on a carbine-length gas system paired with the iconic free-float RIS II rail and integrated hanger system for full M203 and suppressor compatibility. No workarounds. No compromises. The real thing.
FEATURES:
- 12.5 chrome-lined heavy-phosphate-coated government profile barrel.
- Free-floating GL/SSC RIS II. Integrates all M203 grenade launcher mounting components directly into the rail without additional parts or special tools. Provides real estate for accessories without affecting barrel harmonics.
- Chrome Moly Vanadium Steel Cold Hammer Forged 1:7 Twist Government Profile Chrome Lined Mil-Spec Heavy Phosphate Coated 12.5" Carbine Gas System.
- Compatible with Suppressors and M203 mounting accessories via free-float hangar system.
- Made in the USA.
The Daniel Defense GRIP-N-RIP Charging Handle was designed and manufactured with the features and benefits to enhance every user’s comfort and performance. The GRIP-N-RIP is engineered for suppressed fire with anti-gas features that redirect gas flow upward and away from the face and away from the operator. Independently ambidextrous handles accommodate left- and right-handed shooters with each handle independently operating the latch. The 5.56 option fits all AR-15 pattern rifles and the 7.62 option fits all DD5 GEN II (V3V4V5) firearms (not compatible with DD5 V1 or V2) and all DPMS Gen 1 length AR-10 rifles.
Features:
- Light weight enlarged ergonomic handles made from 6061-T6 aluminum and Type III hard coat anodized
- Main body machined from 7075-T6 aluminum & type III hard coat anodized
- Latch is made from 6061-T6 aluminum & Type III hard coat anodized
- Heavy duty stainless steel roll pins
- Made in the U.S.A.
Daniel Defense has developed a low-profile offset mount for secure mounting of one of the top-selling weapon lights in the industry today: the SureFire Scout Light. The lightweight snag-free design of this rugged mount is compatible with M-Lok handguards—like the Daniel Defense MFR Rail—and it’s fully reversible for ambidextrous use. Lightweight durable and aesthetically pleasing to the eye the Daniel Defense M-Lok Scout Light Mount accommodates the following SureFire Scout Light models: SureFire M300 Mini Scout Light M600 Ultra Scout Light M600P Fury Scout Light M300V Mini Scout Light M600V Scout Light
- 6061-T6 Aluminum
- Type III Hard Coat Black Anodizing
- Weighs 0.7 of an ounce
- Made in the USA!
Daniel Defense M-LOK Picatinny Rail Section