Features:
- LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum Type III Hard Coat Anodized
- UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum Type III Hard Coat Anodized
- BARREL: Chrome Moly Vanadium Steel Cold Hammer Forged 1:7 Twist 14.5" M4 Profile Chrome Lined Mil-Spec Heavy Phosphate Coated and HP/MPI Tested
- GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel with Mil-Spec Heavy Phosphate Coating Carbine Length Direct Impingement
- MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor Extended 17-4 PH Stainless Steel Salt Bath Nitride Finished
- BOLT CARRIER GROUP: M16 Profile Mil-Spec MP Tested Chrome Lined Properly Staked Gas Key
- BUFFER: H Buffer
- SIGHTS: Sold Separately
- HANDGUARD: Daniel Defense M4A1 Rail Interface System (RIS) II CNC Machined of 6061-T6 Aluminum
- CHARGING HANDLE: GRIP-N-RIP Charging Handle Body CNC Machined of 7075-T6 Aluminum Handles & Latch CNC Machined of 6061-T6 Aluminum Heavy Duty Stainless Steel Roll Pins Type III Hard Coat Anodized
- RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
- BUTTSTOCK: Daniel Defense Buttstock Glass Filled Polymer with Soft Touch Overmolding
- PISTOL GRIP: Daniel Defense Pistol Grip Glass Filled Polymer with Soft Touch Overmolding
- RAIL PANELS: Daniel Defense Rail Panels made from Santoprene heat resistant to 300° F.
- Made in the USA!
Specifications:
- Mounting System: Picatinny
- Caliber: 5.56mm NATO
- Muzzle Thread: 1 ? 2 × 28 TPI (Threads Per Inch)
- Gas System: Carbine
- Barrel Length: 14.5"
- Barrel Profile: M4
- Product Weight: 6.74 lbs
- Length: 31 1/2” – 34 ¾”
- Magazine: DD Magazine
- Case: Daniel Defense Full-Latch Impact Plastic Case
- Manufacturer: Daniel Defense
Features:
- LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum Type III Hard Coat Anodized
- UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum Type III Hard Coat Anodized
- RECEIVER EXTENSION: AR Pistol Receiver Extension
- BARREL: Chrome Moly Vanadium Steel Cold Hammer Forged 1:7 Twist 10.3″ Government Profile Chrome Lined Mil-Spec Heavy Phosphate Coated and HP/MPI Tested
- GAS SYSTEM: Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating Carbine Length Direct Impingement
- MUZZLE DEVICE: Daniel Defense Flash Suppressor 17-4 PH Stainless Steel Salt Bath Nitride Finished
- BOLT CARRIER GROUP: M16 Profile MP Tested Chrome Lined Properly Staked Gas Key
- BUFFER: H Buffer
- HANDGUARD: Daniel Defense RIS II MK18 CNC Machined of 6061-T6 Aluminum Type III Hard Coat Anodized Black
- CHARGING HANDLE: GRIP-N-RIP Charging Handle Body CNC Machined of 7075-T6 Aluminum Handles & Latch CNC Machined of 6061-T6 Aluminum Heavy Duty Stainless Steel Roll Pins Type III Hard Coat Anodized
- BRACE: SB Tactical SBA3 Pistol Stabilizing Brace
- PISTOL GRIP: Daniel Defense Pistol Grip Glass Filled Polymer with Soft Touch Overmolding
- RAIL PANELS: Daniel Defense Rail Panels made from Santoprene heat resistant to 300° F.
- Made in the USA!
Specifications:
- Mounting System: Picatinny
- Caliber: 5.56mm NATO
- Muzzle Thread: 1 ? 2 × 28 TPI (Threads Per Inch)
- Gas System: Carbine
- Barrel Length: 10.3″
- Barrel Profile: Government
- Product Weight: 5.85
- Length: 28 5/8″
- Magazine: DD Magazine (32 Round)
- Case: Daniel Defense Full-Latch Impact Plastic Case
- Manufacturer: Daniel Defense
Daniel Defense Muzzle Climb Mitigator Assy 12-28
The Daniel Defense Offset Flashlight Mount is designed for use in conjunction with a vertical foregrip which is mounted on the bottom rail. The Offset Flashlight Mount may then be mounted on either side rail for ambidextrous use. It is designed so that as the shooters forward hand grips the vertical foregrip his thumb has quick and perfect access to the rear button of his flashlight. This setup eliminates many accidental light discharges because although the action to the on/off button is quick and natural it is also deliberate. Precision CNC machined from a block of 6061 T6 Aluminum and Finished in Hard Coat Type III Mil-Spec Anodized Black for a rock hard lasting finish.
The Offset Flashlight Mount now utilizes their patented “Rock and Lock” one piece mounting system creating an even more robust and streamlined mount as well as simplified installation on any MIL-STD-1913 picatinny rail.
- 6061 T6 Aluminum
- Type III Hard Coat Black Anodizing
- Accommodates a 1" Diameter Flashlight Body
- Made in the USA
The Daniel Defense pistol grip is an improvement to the old standby A2. Daniel Defense designed their grip with ergonomics and controllability in mind. This grip shares the angle of the classic 1911 pistol for the most natural hand position and comfortable feel. This pistol grip incorporates an oversized trigger guard covering the gap between grip and lower receiver which can wear on the shooters hand and easily accommodates for gloves. Installation is simplified by the fact the integral trigger guard doesn’t require a roll pin so there is a reduced chance of damaging the lower receiver. A soft touch overmolding section enhances grip wet or dry.
- 4.25 Inches Tall
- 2 Inches Wide
- 1.38 Inches Thick
- Weight: 0.20 lb
*Screw and Washer included with package.
The Daniel Defense Rail Mount QD Swivel Attachment Point is designed to allow the operator to mount the popular Heavy Duty Push Button Quick Detach Sling Swivel. This mount allows the operator to mount the swivel anywhere along their rail system. The Daniel Defense Rail Mount QD Swivel Attachment Point has been designed to limit the rotation of the swivel to prevent the operators sling from becoming tangled.
The Rail Mount QD Swivel Attachment utilizes Daniel Defense's patented “Rock and Lock” one piece mounting system for a more robust and streamlined attachment point as well as simplified installation on any MIL-STD-1913 picatinny rail. This mount includes a Heavy Duty Push Button Quick Detach (QD) Sling Swivel which accepts sling straps up to 1.25".
- 6061-T6 Aluminum
- Military Specification Hard Coat Type III Anodized
- Durable 1.25" Loop
- Made in the USA!