3.8 Forward FR Picantinny Rail-20MOA-Black
Browning Bar & Long Action BLR-Medium Mount Black
Machined one piece design for extreme accuracy. No moving parts between firearm and scope. Lightweight. Approximately a third of the weight of steel. Fast installation and requires no special tools. Eliminates need for windage screws. Perfect ring alignment. No lapping required. Eliminates or reduces scope damage from tightening rings. Ring placement allows extra eye relief adjustment. Up to 4 times more thread length in rings….full 1/2 inch. Made of billet aluminum. Tempered 6061T6. Grade 8 hardened steel screws.
Browning X-Bolt Two Piece Mount 4 Screws 30mm High Black
This DNZ 2-Piece Scope Mount – Remington .700 is made from high-grade aluminum and weighs only about one-third of what a steel ring base combo does. Made to be tough and durable this mount is easy to install and does not require any special tools.
This mount has 4 times the amount of threads as a conventional mount. This system takes away the need to pick a separate ring and base which over time have a tendency to become loose.
Fits Howa 1500 Mossberg 100ATR 4X4 Patriot MVP Weatherby Vanguard Remington 700721722725 (fits all action lengths): Base screws are 6-48 X 1/4? long. Ring screws are 6-40 X 5/8? long. Both use a 7/64 Allen wrench. Hole spacing dimensions on front mount is .86? and on back mount it is .60?. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63? wide and Tactical rings are .80? wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – X low .86 low .98? medium 1.10? and High 1.23?.
- Hunt Masters signature series two piece scope mounts
- Fits long and short actions some super short actions – left and right hand guns
- Custom made to fit each type of firearm and align perfectly with your rifle’s receiver
- Each ring and base is machined from a solid block of top-grade billet aluminum
- Internal ring and base design allows for extra eye relief adjustment
- Eliminates or reduces scope damage from tightening rings
- Approximately 1/3 the weight of steel
- Eliminates the need for windage screws that can work loose and cause problems
- No moving parts between the firearm and the scope
- Up to four times the threads of other mounts for absolute strength and security
- Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
- Made in the USA
Browning A Bolt Sako A7 Steyr (fits long and short actions ):
- Base screws are 6-48 X 1/4? long. Ring screws are 6-40 X 5/8? long. Both use a 7/64 Allen wrench.
- Hole spacing dimensions on front mount and back mount are .86?. Both mounts are the same part. Standard rings are .63? wide and Tactical rings are .80? wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – low .94? medium 1.06? and High 1.19?.
2 Screws.
A lightweight and extremely rugged mount this DNZ Freedom Reaper Forward Picatinny Rail Mount 5.66 is made to make your weapon more accurate. Made from a solid block of high-grade aluminum this mount is about one-third the weight of conventional mounts with up to 4 times more thread a full half-inch.
Easy to install with no modifications to the weapon all of the hardware required for mounting comes with the DNZ Freedom Reaper Forward Picatinny Rail Mount 5.66.
- Precision machined from a solid block of top-grade billet aluminum
- Custom made to fit each type of firearm and align perfectly with your rifle?s receiver
- No moving parts between the firearm and the scope
- 67% lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for
- absolute strength and security
- Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
- Made in the USA
Made to align perfectly with the receiver of a rifle this DNZ Freedom Reaper Forward Ring Picatinny Rail Mount with 45DAR can be customized for a variety of firearms. This mount is 67% lighter than comparable mounts and is tough enough to handle the shock of recoil and extreme temperatures.
Made in the USA the DNZ Freedom Reaper Forward Ring Picatinny Rail Mount with 45DAR can be installed by the user and no modifications to the weapon are needed.
- Precision machined from a solid block of top-grade billet aluminum
- Custom made to fit each type of firearm and align perfectly with your rifle?s receiver
- No moving parts between the firearm and the scope
- 67% lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for
- absolute strength and security
- Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
- Made in the USA
The DNZ Freedom Reaper Picatinny Rail Scope Mount Cap will accommodate most of the 1-inch riflescope tubes on the market. The item will also fit the four-screw mount caps from DNZ products.
This piece is designed for a snug and secure fit. You will also find that the cap is very easy to install with just a couple of steps. The construction is from heavy-duty metal allowing for maximum security. DNZ is a trusted industry name and that is because it provides durable pieces that perform.
Designed to eliminate misaligned rings that can damage a scope this DNZ Freedom Reaper Picatinny Rail Mount is one high-strength mount made for high-quality scopes. Anodized for longer life this mount is about one-third the weight of conventional mounts. Made with a rigid design there are no moving parts between the scope and the gun.
This mount has screws with 4 times the threads of comparable mounts and it withstands extremes in temperatures much better than steel mounts.
The DNZ Savage Round Receiver LA Scope Mount with Offset Rings is one of many DNZ scope mount models that is machined with a one-piece design to ensure pinpoint accuracy and that there are no moving parts between your scope and your weapon.
This particular model was designed for use with long-action 1-inch tube scopes and comes in an attractive matte finish. The DNZ Savage Round Receiver LA Scope Mount with Offset Rings can be installed quickly and easily – its unique design even eliminates the need for windage screws. This scope mount features a design that ensures perfect ring alignment with no lapping needed.
This DNZ Scope Mount – Savage is available to mount to left- and right-handed firearms and is made for a custom fit to align perfectly with the receiver of a firearm. Made from high-quality billet aluminum this mount is 67% lighter than comparable steel mounts.
This DNZ Scope Mount – Savage also absorbs shock and can handle extremes in temperature better than a steel mount. Made in the USA this mount has no moving parts between the scope and the firearm.
Made from high-quality billet aluminum this DNZ Scope Mount – Tikka T3 is made in the USA and is custom made to fit many types of firearms and provide for perfect alignment with the receiver of the firearm. This mount is 67% lighter than a steel mount yet strong and more durable.
There are no moving parts between the scope and the firearm ensuring reliability. Made shockproof to take the rigors of heavy use and recoil this mount can also better withstand extremes in temperatures than conventional steel mounts.
Made from high-quality billet aluminum this DNZ Scope Mount – Tikka T3 is made in the USA and is custom made to fit many types of firearms and provide for perfect alignment with the receiver of the firearm. This mount is 67% lighter than a steel mount yet strong and more durable.
There are no moving parts between the scope and the firearm ensuring reliability. Made shockproof to take the rigors of heavy use and recoil this mount can also better withstand extremes in temperatures than conventional steel mounts.
Made from high-quality billet aluminum this DNZ Scope Mount – Tikka T3 is made in the USA and is custom made to fit many types of firearms and provide for perfect alignment with the receiver of the firearm. This mount is 67% lighter than a steel mount yet strong and more durable.
There are no moving parts between the scope and the firearm ensuring reliability. Made shockproof to take the rigors of heavy use and recoil this mount can also better withstand extremes in temperatures than conventional steel mounts.
Made from high-quality billet aluminum this DNZ Scope Mount – Tikka T3 is made in the USA and is custom made to fit many types of firearms and provide for perfect alignment with the receiver of the firearm. This mount is 67% lighter than a steel mount yet strong and more durable.
There are no moving parts between the scope and the firearm ensuring reliability. Made shockproof to take the rigors of heavy use and recoil this mount can also better withstand extremes in temperatures than conventional steel mounts.
The Aluminum DNZ Game Reaper takes the variables out of mounting a scope to your firearm. Machined with the utmost precision these single piece mounts remove the need for having separate rings and bases eliminating moving parts and making for a more accurate mount. Each mount is custom made to fit the specific type of firearm ensuring a tight fit that will always hold zero. The aluminum mount absorbs shock and temperature extremes better than steel and at a fraction of the weight.
Fits Savage Flatback Receiver (Fits 2003 and older long and short actions) :
- Front of receiver is rounded and back is flat where mounts attach.
- Base screws are 6-48 X 1/4? long. Ring screws are 6-40 X 5/8? long. Both use a 7/64 Allen wrench.
- Hole spacing dimensions on front and back mount are .86?. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63? wide and Tactical rings are .80? wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – low .92? medium 1.05? and High 1.17?.
- 4 screws
Weight of most all Game Reaper 2 mounts are 2 to 3 ounces. Depends on height style and size. Material is 6061T6 Aluminum.
Browning A Bolt 3 mounts are machined to accommodate 8-40 base screws. Some Savage Round Receiver Guns and Savage Axis Guns are drilled and tapped with 8-40 base screw holes and will fit the Browning A-Bolt 3 Game Reaper 2 piece mount. Please check your gun to make sure what size holes are in the receiver before you order.
Base screws are 8-40 X 1/4″ long and use a 9/64 Allen wrench. Ring screws are 6-40 X 5/8″ long and use a 7/64 Allen wrench.
All Game Reaper 2 piece 30MM mounts are tactical meaning that the number of ring screws are 4 on each end of the mount.
Tactical rings are .80″ wide.
These will accommodate left or right handed and short or long action guns.
Height of mounts from top of receiver to centerline of scope tube is – low .94″ medium 1.06″ and High 1.19″.
- Game Reaper 2 signature series two piece scope mounts
- Fits long and short actions some super short actions – left and right hand guns
- Custom made to fit each type of firearm and align perfectly with your rifle’s receiver
- Each ring and base is machined from a solid block of top-grade billet 6061T6 aluminum
- Internal ring and base design allows for extra eye relief adjustment
- Eliminates or reduces scope damage from tightening rings
- No lapping required.
- Approximately 1/3 the weight of steel
- Eliminates the need for windage screws that can work loose and cause problems
- No moving parts between the firearm and the scope
- Up to four times the threads of other mounts for absolute strength and security
- Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
- Made in the USA
DNZ Game Reaper 2 Browning XBolt 30mm Medium Black
This DNZ Freedom Reaper Carry Handle Mount – AR15 is designed to mount directly to the carry handle of an AR-15. This is one very solid base with integral rings. Made from lightweight yet very strong aluminum this mount is only about one-third of the weight of conventional mounts so it will not throw off the balance of the weapon.
All of the hardware needed for mounting comes with the package and installation can be done in a matter of minutes.
- Precision machined from a solid block of top-grade billet aluminum
- Custom made to fit each type of firearm and align perfectly with your rifle?s receiver
- No moving parts between the firearm and the scope
- 67% lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for
- absolute strength and security
- Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
- Made in the USA
Made to align perfectly with the receiver of a rifle this DNZ Freedom Reaper Forward Ring Picatinny Rail Mount with 45DAR can be customized for a variety of firearms. This mount is 67% lighter than comparable mounts and is tough enough to handle the shock of recoil and extreme temperatures.
Made in the USA the DNZ Freedom Reaper Forward Ring Picatinny Rail Mount with 45DAR can be installed by the user and no modifications to the weapon are needed.
- Precision machined from a solid block of top-grade billet aluminum
- Custom made to fit each type of firearm and align perfectly with your rifle?s receiver
- No moving parts between the firearm and the scope
- 67% lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for absolute strength and security
- Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
- Made in the USA