The new DPMS Panther Claw Custom Drop-In AR Single Stage Curved Bow Trigger is designed and engineered with the highest quality standards. Built-in a convenient drop-in design, even newcomers to the AR world can integrate this into their build for an easy and significant upgrade. You will feel a definitive difference over your old trigger with a lighter, crisp clean break and a short reset for more accurate shot placement. Upgrade your Mil-Spec factory AR-15 trigger now to experience the difference.

Barrel: Chrome Moly steel phosphate coated barrel. Chambered in 5.56 NATO with a 1/7 twist M4 barrel extension and a carbine-length gas system. Barrel is finished off with a DPMS 10.5" Lightweight M-Lok rail low-profile gas block and A2 flash hider.
Upper: Forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized. Uppers include forward assist and dust cover. These uppers are made for us right here in the USA by a mil-spec manufacturer.
Bolt: Full-auto profile bolt carrier group. Shot-peened mil-spec Carpenter No. 158® steel bolt. Gas Key Hardened to USGI Specifications Fastened with Grade 8 screws and Staked Per Mil-Spec.
Lower: These forged lowers are quality made using 7075-T6 aluminum and are marked "MULTI" for caliber. Finish is hard coat anodize. Finished with a Magpul MOE Grip SB Tactical SBA3 Pistol Stabilizing Brace and 6 position 7075 buffer tube. The fire control group is a DPMS Panther Polished Trigger (PPT) single-stage assembly.

Barrel Length: 11.5"
Barrel Profile: A2
Barrel Steel: Chrome Moly Vanadium
Barrel Finish: Phosphate
Chrome Lining: No
Muzzle Thread Pattern: 1/2" x 28
Twist Rate: 1 in 7"
Barrel Extension: M4
Gas System Length: Carbine
Diameter at Gas Block: .750"
Gas Block Type: Low-Profile Gas Block
Muzzle Device: A2 -style
Receiver Material: Forged 7075-T6
Receiver Type: M4
Handguard Type: DPMS 10.5" Lightweight M-Lok
Bolt Material: Carpenter 158 Steel
Bolt Carrier Profile: Full Auto
Fire Control Group: Panther Polished Trigger (PPT)
Grip: Magpul MOE Grip Black
Buffer Tube: 7075 T6 Aluminum
Adjustment: 6 Position
Pistol Brace: SB Tactical SBA3 Pistol Stabilizing Brace

The Kitty Kat DPS features a Chrome Moly Vanadium, threaded barrel with an M4 barrel extension; A2 flash hider; aluminum receivers; single-stage Mil-Spec trigger; DPMS adjustable CAR Brace and 6 position mil-spec buffer tube.

These forged stripped lowers are made using the most advanced aerospace manufacturing technology to produce the industries finest, forged Mil-Spec lowers. The receivers are machined on a multimillion-dollar, automated, manufacturing system that enables us to produce a product of unequaled quality and value. These forged lowers are quality made using material is 7075-T6 and are marked “Mutli-Cal” to accommodate most builds. The finish is black hard coat anodizing per Mil-8625 Type 3 class 2.

Barrel: Chrome-moly vanadium steel barrel that is nitride coated andc hambered in 5.56 NATO with a 1:7 twist rate M4 barrel extension and a carbine-length gas system. This A2 profile barrel is finished off with a 13.5” DPMS M-Lok free-float handguard low-profile gas block and A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized. Uppers include forward assist and dust cover. These uppers are made for us right here in the USA by a mil-spec manufacturer.

Bolt Carrier Group: Full-auto profile bolt carrier group. Shot-peened mil-spec Carpenter 158 steel bolt. Gas Key Hardened to USGI Specifications fastened with Grade 8 screws and Staked Per Mil-Spec. Carrier is 8620 steel M-16 full-auto profile.

Lower: These forged lowers are quality made using 7075-T6 aluminum and are marked "MULTI" for the caliber. Finish is hard-coat anodized. The Mil-spec diameter 7075-T6 buffer tube is hard-coat anodized with 6 adjustment positions and is fitted with a M4 style stock DPMS Retro A2 grip Retro aluminum trigger guard and DPMS Retro FCG.

Details

Caliber: 5.56 NATO
Barrel Length: 16 inches
Barrel Profile: M4
Barrel Steel: Chrome Moly Vanadium
Barrel Finish: Nitride
Muzzle Thread Pattern: 1/2" x 28
Twist Rate: 1 in 7"
Barrel Extension: M4
Gas System Length: Carbine
Diameter at Gas Block: .750"
Gas Block Type: Low Profile
Muzzle Device: A2 -style
Receiver Material:Forged 7075-T6
Receiver Type: M4
Handguard Type: 13.5" Quad-Rail
Bolt Material: Carpenter 158 Steel
Bolt Carrier Profile: Full Auto
Grip: DPMS Retro A2 Pistol Grip
Buffer Tube Length: Carbine
Stock: M4 Adjustable Stock
Overall Length: 32 inches
Weight (as configured): 6.8 lbs

Barrel: Chrome-moly vanadium steel barrel chambered in 5.56 NATO nitride coated with a 1:7 twist rate M4 barrel extension and a carbine-length gas system. This M4 profile barrel is finished off with a 13.5” DPMS M-Lok free-float handguard low-profile gas block and A2 flash hider.

Upper: Forged 7075-T6 M4 AR upper is machined to MIL-SPECS and hard coat anodized. These uppers are made right here in the USA.

Bolt Carrier Group: Full-auto profile bolt carrier group. Shot-peened mil-spec Carpenter 158 steel bolt. Gas Key Hardened to USGI Specifications fastened with Grade 8 screws and Staked Per Mil-Spec. Carrier is 8620 steel M-16 full-auto profile.

Lower: These forged lowers are quality made using 7075-T6 aluminum and are marked "MULTI" for the caliber. Finish is hard-coat anodized. The Mil-spec diameter 7075-T6 buffer tube is hard-coat anodized with 6 adjustment positions and is fitted with a M4 style stock DPMS A2 grip aluminum trigger guard and a MIL-SPEC FCG.

Barrel Length: 16”
Barrel Material: 4150V Chrome Moly Vanadium Steel
Barrel Finish: Nitride
Barrel Profile: M4
Chamber: 5.56 NATO
Twist Rate: 1 in 7”
Extension: M4
Gas System: Carbine-Length
Gas Block Type: Low Profile .750” Diameter
Upper Receiver: Forged 7075 T6 Aluminum
Receiver Style: M4 with feed ramps
Receiver Finish: Hardcoat Anodized
Forward Assist: Yes
Dust Cover: Yes
Handguard Style: DPMS M-Lok Free Float Rail
Bolt Steel: Carpenter 158 Mag Phosphate coated
Bolt Carrier Steel: 8620 Chrome Lined
Staked Gas Key: Yes
Lower Receiver: Forged 7075 T6 Aluminum
Receiver Finish: Hardcoat Anodized
Fire Control Group: AR-15 Mil-Spec Fire Control Group
Buffer Tube: 7075 T6 Aluminum Mil-Spec Tube
Adjustment: 6-position collapsible
Stock: DPMS M4 Carbine Stock
Magazine: (1) 30-Round Magazine (where available by law)
Weight: 7 Lbs
Length: 32"

Barrel: Chrome-moly vanadium steel barrel nitrided and chambered in 5.56 NATO with a 1:7 twist rate M4 barrel extension and a mid-length gas system. This A2 profile barrel is finished off with a 13.5” DPMS M-Lok free-float handguard low-profile gas block and A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized. Uppers include forward assist and dust cover. These uppers are made for us right here in the USA by a mil-spec manufacturer.

Bolt Carrier Group: Full-auto profile bolt carrier group. Shot-peened mil-spec Carpenter 158 steel bolt. Gas Key Hardened to USGI Specifications fastened with Grade 8 screws and Staked Per Mil-Spec. Carrier is 8620 steel M-16 full-auto profile.

Lower: These forged lowers are quality made using 7075-T6 aluminum and are marked "MULTI" for the caliber. Finish is hard-coat anodized. The Mil-spec diameter 7075-T6 buffer tube is hard-coat anodized with 6 adjustment positions and is fitted with a B5 Bravo Stock B5 premium grip B5 trigger guard and Panther Polished Trigger (PPT).

Caliber: 5.56 NATO
Barrel Length: 16 inches
Barrel Profile: M4
Barrel Steel: Chrome Moly Vanadium
Barrel Finish: Nitride
Chrome Lining: No
Muzzle Thread Pattern: 1/2" x 28
Twist Rate: 1 in 8"
Barrel Extension: M4
Gas System Length: Carbine
Diameter at Gas Block: .750"
Gas Block Type: F-marked Front Sight Base
Muzzle Device: A2 -style
Receiver Material: Forged 7075-T6
Receiver Type: M4
Handguard Type: M4 with heat shields
Bolt Material: Carpenter 158 Steel
Bolt Carrier Profile: Full Auto
Fire Control Group: Panther Polished Trigger (PPT)
Grip: B5 Premium Grip
Stock: B5 Bravo
Buffer Tube Length: Carbine
Buffer Tube Diameter: Mil-spec
Overall Length: 32 inches
Weight (as configured): 6.8 lbs

Barrel: Nitride coated Chrome Moly steel barrel. Chambered in 5.56 NATO with a 1/7" twist M4 barrel extension and a carbine-length gas system. Barrel is finished off with a standard handguard an F-Marked front sight base and A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized. Uppers include forward assist and dust cover. These uppers are made for us right here in the USA by a mil-spec manufacturer.

Bolt: Full-auto profile bolt carrier group. Shot-peened mil-spec Carpenter No. 158® steel bolt. Gas Key Hardened to USGI Specifications Fastened with Grade 8 screws and Staked Per Mil-Spec.

Lower: These forged lowers are quality made using 7075-T6 aluminum and are marked "MULTI" for caliber. Finish is hardcoat anodize.. Mil-spec diameter 7075-T6 buffer tube is hardcoat anodized has 6 adjustment positions is fitted with a DPMS M4 Carbine Stock. The fire control group is a DPMS mil-spec finished single-stage assembly.

Details

Caliber: 5.56 NATO
Barrel Length: 16 inches
Barrel Profile: M4
Barrel Steel: Chrome Moly Vanadium
Barrel Finish: Nitride
Chrome Lining: No
Muzzle Thread Pattern: 1/2" x 28
Twist Rate: 1 in 7"
Barrel Extension: M4
Gas System Length: Carbine
Diameter at Gas Block: .750"
Gas Block Type: F-marked Front Sight Base
Muzzle Device: A2 -style
Receiver Material: Forged 7075-T6
Receiver Type: M4
Handguard Type: M4 with heat shields
Bolt Material: Carpenter 158 Steel
Bolt Carrier Profile: Full Auto
Fire Control Group: Panther Polished Trigger (PPT)
Grip: A2-style
Stock: M4-style
Buffer Tube Length: Carbine
Buffer Tube Diameter: Mil-spec
Overall Length: 32 inches
Weight (as configured): 6.8 lbs
Backup Sight: Magpul MBUS Rear Sight Black

DPMS DP51655130479
Barrel Length: 10.5″
Barrel Profile: A2
Barrel Steel: Chrome Moly Vanadium
Barrel Finish: Phosphate
Chrome Lining: No
<strong style="-webkit-text-stroke-width:0px;background-color:rgb(255, 255, 255);box-sizing:border-box;color:rgb(26, 26, 26);font-family:lato, "Helvetica Neue", Helvetica, Arial, sans-serif;font-size:14px;font-style:normal;font-variant-caps:normal;font-variant-ligatures:normal;letter-spacing:normal;orphans:2;text-align:left;text-decoration-color:initial;text-decoration-sty

The DPMS Anvil was designed from the ground up to be a new standard in AK-47 rifles, utilizing all precision manufactured parts. All Anvil Rifles are Hammer Forged with a hammer forged bolt, carrier, and front trunnion. The 4150 barrel is nitride treated for accuracy and durability and is pressed into a hammer forged front trunnion to ensure the longevity AK-47s are known for. The hardened steel 1mm receiver features a Mil-Spec style single hook trigger and side rail mount. The front trunnion and bolt carrier are engraved with Anvil to designate the Anvil hammer forged model. The rifle is finished with a classic polymer handguard, stock and grip.

Takedown & Pivot Pin Assembly includes Takedown Pin, Pivot Pin, two Takedown Springs, two Takedown Detents. Bolt Catch Assembly includes Bolt Catch, Bolt Catch Detent, Bolt Catch Detent Spring and Bolt Catch Roll Pin. Magazine Catch Assembly includes Magazine Catch, Magazine Catch Button and Magazine Catch Spring, Safety Selector Assembly includes Safety Selector, Selector Detent and Selector Spring. Enhanced Polymer Trigger Guard, Roll Pin, set screw and Hex key. *NO FCG, grip or stock.

Introducing the DPMS CAR-15 style adjustable pistol brace. Made from durable injection molded polymer, this brace is the perfect way to finish off that retro pistol build or just add some functional style to an existing lower. Lever easily inverts to slide the brace on a 6 position mil-spec buffer tube and locks snug into place. QD point on back of brace for easy sling connection.