ULTIMAG G19 – 16-round 9x19mm magazine capacity.
Product Advantages:
- 16 round 9x19mm capacity
- Two enclosed floor plates
- Concealable base plate installed; tactical floor plate included
- Visual indication of even rounds from 4 to 16
- No tools needed for disassembly
- Multi-textured surface for enhanced grip
- Impact and crush-resistant reinforced polymer
- Multiple colors available
- Also available in limited 10-round 9x19mm capacity (ULTIMAG 1910R)
Compatibility:
- Glock 19 Handguns
The FAB Defense Ultimag features a low-friction follower for smooth feeding in all environments. Additionally the AR-15 magazine utilizes an over-travel stop to protect your firearm from damage during rapid mag changes under stress. The long-lasting cataphoresis-coated spring design for provides ideal corrosion protection and extended spring life in loaded storage.
The ULTIMAG G2 is the lates generation of our Ultimag AR magazine. After a year of development taking into account and feedback from the field and the needs of the modern AR user the ULTIMAG G2 was launched in 2023 and quickly put into use. Military and police users have tested the ULTIMAG G2 and found that it provides maximum performance for AR users under extreme and challenging conditions. The ULTIMAG G2 is available in two versions: one for 5.56/.223 and the other for .300 BLK
Product Advantages:
- New reinforced & robust design
- Multi-textured surface for enhanced grip when handling and reloading
- High visibility follower for last round identification
- Long-lasting cataphoresis-coated spring for ideal corrosion protection
- Long-lasting spring design for extended duration in loaded storage
- Low-friction follower for increased reliability
- Identification area for easily marking your magazines
- 30 Round magazine
- Available in Black Olive Drab Green or Flat Dark Earth
Compatibility:
- 5.56×45 NATO (.223 Remington) M16/M4/AR15
- .300 BLK
Specifications:
- Length: 72 mm
- Width: 23 mm
- Height: 193 mm
- Weight: 131 gr
The ULTIMAG G2 is the lates generation of our Ultimag AR magazine. After a year of development taking into account and feedback from the field and the needs of the modern AR user the ULTIMAG G2 was launched in 2023 and quickly put into use. Military and police users have tested the ULTIMAG G2 and found that it provides maximum performance for AR users under extreme and challenging conditions. The ULTIMAG G2 is available in two versions: one for 5.56/.223 and the other for .300 BLK
Product Advantages:
- New reinforced & robust design
- Multi-textured surface for enhanced grip when handling and reloading
- High visibility follower for last round identification
- Long-lasting cataphoresis-coated spring for ideal corrosion protection
- Long-lasting spring design for extended duration in loaded storage
- Low-friction follower for increased reliability
- Identification area for easily marking your magazines
- 30 Round magazine
- Available in Black Olive Drab Green or Flat Dark Earth
Compatibility:
- 5.56×45 NATO (.223 Remington) M16/M4/AR15
- .300 BLK
Specifications:
- Length: 72 mm
- Width: 23 mm
- Height: 193 mm
- Weight: 131 gr
32 Round 9x19mm Polymer Magazine for Glock
Product Advantages:
- 32 round 9x19mm capacity
- Visual indication of even rounds from 4 to 32
- No tools needed for disassembly
- Multi-textured surface for enhanced grip
- Impact and crush-resistant reinforced polymer
- Multiple colors available
Compatibility:
- GLOCK:G17 / G17L / G19 / G19X / G26 / G34 / G45 / G47
The Vanguard AR is the new handguard by FAB Defense featuring the M-LOK rail system in a slim design that incorporates an innovative heat shield for optimal performance.
Features:
- M-LOK compatible handguard accepts direct attachment M-LOK accessories or M-LOK 1913 Picatinny rail sections
- Easy installation no Gunsmith required
- M-LOK Slots at the 6 position for mounting forward grips
- M-LOK Side Slots at 2 3 9 & 10 positions for mounting additional accessories
- Innovative additional heatshield for proper thermal insulation
- Two integrated QD sling swivel sockets
- Extremely durable polymer construction
Compatibility:
Carbine length AR15/M4 models and variants without a gas block
The AGF-43S is a folding pistol grip for M16 variants which enables easier vehicular deployment and improves concealment while in storage or carried within a bag.
Features:
- Folds from vertical to horizontal position and back by the push of a button
- Allow compact weapon configuration for easy fitting in a case or on a rack
- Provides easier concealment for undercover operations
- Ergonomic non-slip design
- Finger grooves and backstrap shape for enhanced more comfortable grip
- Extended beavertail enables higher firmer hold for superior weapon handling
- Readily accessible storage compartment with tight-sealing hinged door
The GL-CORE is our newest addition to our line of buttstocks. The integrated cheek rest ergonomic buttpad and an interchanging tube adapter provide an unmatched fit on Mil-Spec and Commercial buffer tubes with a high level of efficiency and comfort. Advantages:
- Ergonomically shaped rubberized butt-pad for quick shouldering and easy maneuvering of the weapon
- Interchangeable buffer tube adapters for a tight fit on Mil-Spec and Commercial buffer tubes
- Integrated cheek rest in an overall compact and sleek design
- No protruding parts will not get caught on gear or webbing
- Inversed positioning lever will not open accidently
- Two integrated quick detach rear sling swivel connectors
- Made of durable and light-weight fiberglass reinforced polymer composite
Mako Group 7-Position Tactical Folding Grip w/ Storage Cavity is a compact forward grip that folds to any of seven desired angles including vertical and horizontal.image This Mako Group weapon accessory features push-button folding mechanism that allows no play when locked in position. Tactical Folding Grip from Mako Group has short compact size that keeps hand close to weapon. Also this weapon accessory has internal O-ring sealed waterproof battery or accessory storage compartment. Mako Group Folding Grip fits any weapon with a standard picatinny lower rail. In addition 7 Position Folding Grip has durable hard-wearing lightweight reinforced polymer construction.
Features
- Offers 7 different grip positions for various tactical shooting options
- Has push-button folding mechanism that allows no play when locked in position
- Grip can be slipped-on or side-mounted on a picatinny rail
- Has short compact size that keeps hand close to weapon
- Has internal O-ring sealed waterproof battery or accessory storage compartment
- Fits any weapon with a standard picatinny lower rail
- Has durable hard-wearing lightweight reinforced polymer construction
Enables operator to carry spare mag ready to use on weapon. Also use as unique ergonomic fore grip. Quick release button-just slide grip onto rail. Back up locking screw. Magazine release button-similar to AR15-M16 to quick.
Features:
. Quick Release button – just slide the grip onto the rail.
. Backup Locking Screw
– Should you decide to lock it in place when not using the quick release mechanism.
. Magazine release button – similar to the AR15/M16 one – to quickly release the magazine.
. Can be used asan ergonomic foregrip even without the magazine inside.
Made from reinforced plastic composite it incorporates finger swelts and a backstrap that is designed with surfacing to enhance your grip and minimize the chance of slippage should the grip become wet.
The integral extended beavertail provides better control during firing sequences as it allows a higher and firmer hold on your rifle. Also the supplied insert securely seals the uniquely designed bottom of the Tactical Pistol Grip to allow a readily accessible storage area.
The AG-43 Grip Carries Mako Group Lifetime Replacement Guarantee!
? Easy to fit and secure – Quick Release button.
? Fits hand guards equipped with a Weaver or Picatinny rail system.
? Natural Fighting stance hold on your rifle – Slightly angeled to counter recolil.
? Improved performance in reaction on target time and muzzle control during rapid fire.
? No gunsmithing is required.
? Quick Release mechanism.
? Moulded from reinforced plastic composite.
? Super lightweight.
? Fits Picatinny rail
? Transforms Harris-type bipods into rail-mounted accessories
? MIL-SPEC reinforced polymer composite
? Bipod not included
Transform the magazine well of your AR-15 rifle into a comfortable close ergonomic foregrip with the FAB Defense MWG Mag-Well Grip and Funnel. This mag-well grip will enhance maneuverability and give you a close hold for speed in CQB situations. The MWG also provides as a magazine funnel for easier faster more reliable magazine changes.
The best and most affordable Tactical Vertical Grip out there.
Features:
– No Slip Design
– Double sided pressure pad housing
– Internal water-proof battery compartment
– Quick-release attachment mechanism
– Additional locking screw option
– Durable and lightweight polymer construction
– Easy to mount requires no gunsmithing
– Available soon in OD Green and Desert Tan
? The first functional recoil-reducing collapsible stock for AR-15 carbines!
? Shoot faster accurately!
? Reduces recoil and muzzle rise to allow faster more accurate fire.
? Provide comfort for 5.56 and large caliber M4/AR-15s .308 AR-10s and Mako shotgun kits.
? 5 sling attachment points including 2 QR attachment points.
? Storage compartment for batteries or parts.
? MIL-SPEC reinforced polymer composite steel hardware rubber buttpad.
? Fits any weapon that accepts M-4/AR15 style stocks.
? Patented system reduces recoil and muzzle rise.
? Auto-tensioner for no-rattle fit on both mil-spec and commercial tubes!
? Comfortable rubber buttpad provides traction on body armor.
? Streamlined shape will not snag on gear.
? Cheek riser is adjustable for optimal height for optics.
The AGR-43 is the latest addition to our line of Pistol Grips featuring State-of-the Art Multi-Textured Rubber enhancing your grip experience. Incorporated into its design is the superior contour of its predecessor adding even more comfort and proper ventilation needed in extreme heat and moist environments giving you the edge you need in the field or at the range.
Advantages:
• MIL-SPEC Reinforced Polymer Composite with Muti-Textured Rubber Overmold Superior Coating
• Three Different Rubber Overmolded Style Textures; Rib Studded at Palm Alligator Pattern for front Fingers and Moon Surface Textured Sides
• Multi Rubber Texture Provides Superior Comfort; Adds Appropriate Ventilation Prevents Slip and Reduces Sweaty Palms
• Finger Swelts and a Backstrap Shape Design Provides Enhanced Grip Even when Wet
• Extended Beavertail for Better Control Allowing a Higher Firmer Hold
• Readily Accessible Storage Area with Securely Sealed Hinged Door
• Carries our Lifetime Replacement Guarantee!
The only fully functional bipod designed for precision shooting built into a vertical foregrip. Gen 2 T-Pod with spring loaded swivel feature and pressure switch mount. Bipod allows weapon to rotate approximately 45º left or right of center for easily switching targets or tracking moving targets. Built for designated marksmen and those operating in urban settings who need to transition from close fighting to precision shooting. Issued to Israeli Special Forces and many US military units. Second generation T-POD with improved operation. Single thumb button releases legs. Closing halves and pressing legs up returns T-POD G2 to grip configuration. More compact than first generation T-PODs with a look that matches our AG-43 Pistol Grip and other accessories. Quick release mounting system. Aviation grade Aluminum steel and MIL-SPEC reinforced polymer composite. Pressure switch not included.
The AR-Podium implements a bi-pod support for the AR-15 in a new and innovative way. The AR-Podium enables the operator to install a steady and durable bi-pod platform without adding front-end weight and saving valuable rail space. The AR-Podium is easily deployed with the main shooting hand without having to alter the grip on the weapon or lose sight of the target. *US Patent No. 9354012. * Compatibility: M-16 / AR-15 5.56×45 lower receiver variants with a standard magazine well” Additional Features & Benefits: Compact and sleek design with no protruding parts Rapid deployment mechanism operates by the push of a button Provides steady and durable bipod platform Quick and easy installation no Gunsmith required Made of light and durable high-end reinforced polymer composite Saves valuable rail space for additional mounting options The model includes the AGR-43 pistol grip and the Podium bi-pod.
- Weight: 357 gr
- Height: 30 mm
- Height (open / deployed): 78 mm
The ‘PTK’- Ergonomic Pointing Grip conceptualizes within its design a unique Special Forces combat proven instinctive shooting method incorporating natural pointing positioning which enhances accuracy speed and overall tactical performance.
The Mako Group Tactical Side Mount for 1