G96 Synthetic Gun Oil will maintain original tolerances under extreme conditions and keep your firearm cleaner longer. Unique combination of additives protect and bond to metal yet it is safer for the environment than most other additives.
G96 Gun Treatment was designed to solve a gun owner’s cleaning, lubricating and corrosion protection problems. A unique formulation of active lubricants will not freeze, oxidize or evaporate. Designed with a pleasant odor, this gun treatment is assured perfect firing from -50 F below zero to 350 F.
Mirror like finish is guaranteed to blend perfectly into the original blueing and leaves no streaks or spots. Won’t rub off or discolor.
For those who prefer a liquid touch up blueing, this product blues instantly to produce a rich finish that will not rub off or discolor.
Instant action gun blue pen type dispenser makes it easy to touch up small marks and scratches with a minimum of preparation. This product produces a rich dark blue that will not rub off or discolor, and is ideal for use on finger guards, barrel tips, etc.
About the G96 Gun Treatment:
- Cleans Your Gun: Contains solvents which will completely remove all traces of rust gun powder leading and corrosion in seconds.
- Lubricates Your Gun: Contains lubricants which will not freeze oxidize or evaporate (the result of missile research). Leaves no gummy residue. Keeps firing pin and all moving parts working as low as -50F below zero; insures perfect firing every time.
- Protects Your Gun: Leaves invisible magnetic film over all metal parts which protects your gun against rust under all weather conditions even salt water spray. Protects frequently handled guns against “fingerprint” damage. This is the single and best gun care maintenance product ever designed to solve a gun owner’s cleaning lubricating and corrosion protection problems. A unique formulation of active lubricants will not freeze oxidize or evaporate. Designed with a pleasant odor this gun treatment is assured perfect firing from 50 F below zero to 350 F.
- Safe for use on polymers.
DIRECTIONS: If necessary clean firearm first using G96 Bore Solvent or G96 Crud Buster. Spray evenly over area to be treated. Allow to set for 60 seconds. Wipe with clean cloth. Apply to all metal surfaces inside chamber and inside barrel. Wipe after application. When treating gun for first time or for long term storage protection spray three times wiping dry after first and second application. Note: After treating gun allow solvent contained in the oil to evaporate for 10 minutes before placing gun in any airtight container such as a gun case sealed carton etc.
The high pressure cleaning solvent contained in this product effectively cleans all moving metal parts triggers ejectors and extractors on firearms. The extension tube which inserts into the valve head produces a high pressure spray that allows the solvent to penetrate and remove soluble as well as insoluble particles from the firearm. It is excellent for use on rifles shotguns and pistols.
DIRECTIONS: For proper spraying Crud Buster should be at room temperature. For pinpoint application or to get into hard-to-reach areas firmly insert extension tube into hole in spray button. Hold can upright while spraying. Remove as many parts from the gun action as possible to enable solvent to reach hard to get to spots. Hold into barrel and other areas and spray liberally. After all parts have been cleaned wipe dry with a clean cloth and apply a protective coating of G96 Gun Treatment G96 Gun Oil or G96 Synthetic CLP Gun Oil.
Military APPROVED Bore Solvent (Rifle Bore Cleaner RBC-372F Type A) removes Leading powder residue and copper fouling from bore of the firearm.
- Safe to use on metals.
- Will not cause rust oxidation staining or galvanic corrosion.
- May be harmful to some paints varnishes and plastics. Keep product off of these types of surfaces unless a previous patch test has shown no effect.
- It is recommended that the firearm be re-treated with G96 Gun Treatment G96 Gun Oil or G96 Synthetic CLP Gun Oil after use.
DIRECTIONS: Saturate patch with bore solvent and push through bore from breech and out muzzle. Repeat with clean saturated patch. Follow with dry patch. Repeat wet-dry patch process until bore is clean. For stubborn deposits leave on for up to 60 minutes before removing. Never plug or leave patch in bore. Re-treat with G96 Gun Treatment G96 Gun Oil or G96 Synthetic CLP Gun Oil. Run a dry patch through bore before firing. Safe to use on metals. Will not cause rust oxidation staining or galvanic corrosion. May be harmful to some paints varnishes and plastics. Keep product off of these types of surface unless a previous patch test has shown no effect. For firearms use only.