Whenever a company that makes fast things want the consumer to know they are sporty and fast, we see GT in the name. Originally the abbreviation was for the term Grand Touring, that referred to the item being used for long distances in comfort. The original SDS is a rugged sling that is light weight and very affordable, but we wanted to make a higher speed sling design that shaved ounces while retaining strength and comfort.
The GGG shooters squeeze bag is perfect for the small changes in elevation and windage needed to hit the target from the prone or seated position. They are featured in three sizes to accommodate multiple rifles and shooters. The unique hourglass shape allows the shooter more surface area where you need it and is slimmer where you don’t. There is a hand strap along the side and one end is closed with hook and loop so that the used can customize the amount of fill in the bag. The fill for the bags are sold separately. The user can use any fill medium that they choose, sand, rice, Etc. Colors available Coyote Brown and MultiCam.
This carrier is one size fits most thanks to its adjustable shoulder straps and cummerbund, ensuring a snug fit for just about every warrior’s body type. Should you find yourself on fire, trapped in a tight spot or unexpectedly going for a swim, the new ROC buckles on one shoulder strap (reversible) and either side of the cummerbund can be rapidly released in case of emergency. These also make putting on the carrier much more convenient when you are in a hurry.
Behold, the tried and true handguard design that comes standard on all GGP MKII rifles is available for the builders out there. GGP AR-15 handguards are extruded from 6061-T6 Aircraft Grade Aluminum, finished with True Black Type III Class 2 Hard Coat Anodizing and are available in 7.25″, 9.25″, 12.625″, 15″ and 17″ lengths. The inside diameter is 1.310″ and uses a non-proprietary barrel nut that does not require timing. Simply tighten the barrel nut to 65 ft lbs, slide the handguard over until it is flush with upper receiver. Left and Right side index tabs ensure the handguard does not twist under use. Lastly use the two provided fastening screws to tighten the handguard around the barrel nut, at an approximate torque spec of 35 in lbs.
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 1.60 X 5.40 X 8.35 | |
| Height | 1.6000 | |
| Width | 5.4000 | |
| Length | 8.3500 | |
| OTHER FEATURES: | FEATURES LAMINATE NYLON AND | |
| ATTACHES TO MODULAR WEBBING | ||
| WITH 2 INCLUDED MALICE CLIPS. | ||
| FRONT IS COVERED IN LOOP | ||
| MATERIAL. | ||
| INTERIOR FEATURES A POCKET AND | ||
| MULTIPLE ELASTIC LOOPS FOR | ||
| STORING SMALL ITEMS LIKE PENS, | ||
| LIGHTERS, MULTITOOLS, AND | ||
| BATTERIES. | ||
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 3.45 X 15.60 X 22.20 | |
| Height | 3.4500 | |
| Width | 15.6000 | |
| Length | 22.2000 | |
| OTHER FEATURES: | WAXED CANVAS MATERIAL FOR THE | |
| BODY OF THE BAG HAS INHERENT | ||
| WATER RESISTANT FEATURES. BAG | ||
| STRAP SECURES WHOLE BAG | ||
| SLIP & ZIP MULTI-POCKET | ||
| FRONT FLAP MORE VOLUME 1″ EXTR | ||
| REDUCED WEIGHT LINER IS 70D | ||
| IMPROVED TECH SPACE WITH | ||
| TABLET/TECH POCKET ON TOP OF | ||
| LAPTOP POCKET | ||
FEATURES:
-High-strength reinforced polymer
-Unique GGP grip texture
-Extended Beaver Tail
-Accelerator Cut
-Double Undercut trigger guard
-Full length picatinny rail
-15rd magazine capacity
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 2.50 X 6.60 X 9.80 | |
| Height | 2.5000 | |
| Width | 6.6000 | |
| Length | 9.8000 | |
| CALIBER | 9MM LUGER | |
| METAL FINISH | COLORED | |
| STOCK MATERIAL | SYNTHETIC | |
| STOCK FINISH | NONE | |
| OTHER FEATURES: | HIGH STRENGTH POLYMER FRAME | |
| WITH DOUBLE UNDERCUT TRIGGER | ||
| GUARD, EXTENDED BEAVERTAIL, | ||
| & UNDER BARREL PICATINNY RAIL | ||
| USES GLOCK 19 GEN3 FRAME PARTS | ||
| AND WILL ACCEPT GLOCK 19 GEN 3 | ||
| UPPER SLIDE | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
FEATURES:
Stripped slide
Machined from 17-4 Billet Stainless Steel
Finished in Diamond-Like Coating
Compatible with OEM parts and barrels
Angled Serrations
Milled for the Shield RMS optic
Weight 8.9 oz
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 2.30 X 2.50 X 9.25 | |
| Height | 2.3000 | |
| Width | 2.5000 | |
| Length | 9.2500 | |
| TYPE/COLOR | GLOCK 43 BLACK | |
| SIZE/FINISH | ANGLED SERRATIONS | |
| MATERIAL | BILLET STAINLESS STEEL | |
| OTHER FEATURES: | ANGLED SERRATIONS | |
| DROP-IN INSTALLATION | ||
| ENGINEERED WITH TIGHTER | ||
| TOLERANCES THAN FACTORY SLIDES | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
FEATURES:
Stripped slide
Machined from 17-4 Billet Stainless Steel
Finished in Diamond-Like Coating
Compatible with OEM parts and barrels
Angled Serrations
Milled for the Shield RMS optic
Weight 8.9 oz
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 2.65 X 2.70 X 9.50 | |
| Height | 2.6500 | |
| Width | 2.7000 | |
| Length | 9.5000 | |
| TYPE/COLOR | GLOCK 43 SLIDE/FLAT DARK EARTH | |
| SIZE/FINISH | ANGLED SERRATIONS | |
| MATERIAL | BILLET STAINLESS STEEL | |
| OTHER FEATURES: | ANGLED SERRATIONS | |
| DROP-IN INSTALLATION | ||
| ENGINEERED WITH TIGHTER | ||
| TOLERANCES THAN FACTORY SLIDES | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
Grey Ghost’s V1 slide features dual optic cuts for RMR or DeltaPoint Pro mounting with angled front and rear serrations for superior manipulation. Billet 17-4 stainless with black nitride inside and out provides reliability and tight tolerances.
Specs
- Material: 17-4 billet stainless steel
- Finish: Black nitride inside/out
- Optic Cuts: Dual RMR/DeltaPoint Pro
- Serrations: Angled front and rear
- Weight: 10.32 oz
- Lightening Design: V1 angled cuts
- Type: Stripped (no internals)
- Compatibility: Glock 17 Gen 3
- Tolerances: Tighter than factory
- Features: Enhanced grip friction
Questions about fitment or availability? Give the shop a call and we’ll walk you through it.