YOU MUST BE 18 OR OLDER TO ENTER

The Henry Sporter features a threaded barrel; aluminum receiver; Picatinny rail and Monte Carl American Walnut stock w/checkered pistol grip.

The Henry pump action octagon is as an all American icon. Now fitted with a blue octagonal barrel, it resurrects the great old days of the traditional shooting gallery. It also sports a grooved receiver for mounting a scope, and Marbles semi buckhorn fully adjustable rear sights with standard 3/8″ dovetail slots. The Pump Octagon utilizes a beautifully finished American walnut stock.

The Henry Bear’s Leg features a threaded barrel; Fully adjustable Semi-Buckhorn w/Diamond Insert rear sight, Brass Bead front sight; drilled and tapped receiver with Henry’s BB-RSM scope mount and a synthetic stock.

Converts your Henry H027 to accept popular pistol magazines from other manufacturers.

Converts your Henry H027 to accept popular pistol magazines from other manufacturers.

Small in Stature. Big on Features.
The H1 Bandit Rifle has a little outlaw spirit baked right in. Shorter handier and packed with modern rimfire features it brings a bold new attitude to Henry’s classic lever-action platform. With its 13-inch length of pull checkered genuine American walnut pistol grip-style buttstock and round blued steel barrel the Bandit is built for larger youth shooters smaller-framed adults and anyone who wants a compact rimfire that comes up fast and feels ready to run.

Compact and Quick
The Bandit may be scaled for a shorter reach but it does not feel like a compromise. The pistol grip-style stock gives it a confident hold the checkering adds control and the compact fit makes it easy to shoulder when cans steel plates or squirrels make the mistake of showing up downrange.

Optics-Ready
This Bandit skips the iron sights and goes straight for glass. The receiver cover features an integrated Picatinny rail so mounting a scope or red dot is simple with no extra base required. Just mount your preferred rings or plate and go. The Monte Carlo buttstock with raised cheek piece helps put your eye where it needs to be for better sight alignment.

Suppressor-Ready
Threaded 1/2×28 and ready for quiet work the Bandit is built with suppressor use in mind. Its magazine tube angles slightly downward to clear suppressors with an outside diameter of 1 inch or less a small detail that makes a big difference once you put it to use.

Features:

• Action Type: Lever Action
• Caliber: .22 S/L/LR
• Capacity: 15 LR / 17 L / 21 S
• Barrel Length: 18.5"
• Barrel Type: Round Blued Steel
• Rate of Twist: 1:16
• Overall Length: 35.5"
• Weight: 5.25 lbs
• Receiver Finish: Black
• Rear Sight: N/A
• Front Sight: N/A
• Scopeability: Integrated Picatinny Rail
• Scope Mount Type: Ringmounts for Picatinny Rail
• Stock Material: Checkered Pistol Grip Monte Carlo
• Stock/Grip Style: Straight Grip
• Length of Pull: 13"
• Safety: 1/4 Cock
• Best Uses: Target/Hunting/Small Game
• Embellishments/Extras : 1/2 x 28 Threaded Barrel

Small in Stature. Big on Features.
The H1 Bandit Rifle has a little outlaw spirit baked right in. Shorter handier and packed with modern rimfire features it brings a bold new attitude to Henry’s classic lever-action platform. With its 13-inch length of pull checkered genuine American walnut pistol grip-style buttstock and round blued steel barrel the Bandit is built for larger youth shooters smaller-framed adults and anyone who wants a compact rimfire that comes up fast and feels ready to run.

Compact and Quick
The Bandit may be scaled for a shorter reach but it does not feel like a compromise. The pistol grip-style stock gives it a confident hold the checkering adds control and the compact fit makes it easy to shoulder when cans steel plates or squirrels make the mistake of showing up downrange.

Optics-Ready
This Bandit skips the iron sights and goes straight for glass. The receiver cover features an integrated Picatinny rail so mounting a scope or red dot is simple with no extra base required. Just mount your preferred rings or plate and go. The Monte Carlo buttstock with raised cheek piece helps put your eye where it needs to be for better sight alignment.

Suppressor-Ready
Threaded 1/2×28 and ready for quiet work the Bandit is built with suppressor use in mind. Its magazine tube angles slightly downward to clear suppressors with an outside diameter of 1 inch or less a small detail that makes a big difference once you put it to use.

Features:

• Action Type: Lever Action
• Caliber: .22 Magnum
• Capacity: 12 Rounds
• Barrel Length: 18.5"
• Barrel Type: Round Blued Steel
• Rate of Twist: 1:16
• Overall Length: 35.5"
• Weight: 5.25 lbs
• Receiver Finish: Black
• Rear Sight: N/A
• Front Sight: N/A
• Scopeability: Integrated Picatinny Rail
• Scope Mount Type: Ringmounts for Picatinny Rail
• Stock Material: Checkered Pistol Grip Monte Carlo
• Stock/Grip Style: Straight Grip
• Length of Pull: 13"
• Safety: 1/4 Cock
• Best Uses: Target/Hunting/Small Game
• Embellishments/Extras : 1/2 x 28 Threaded Barrel

Twenty-five years ago from a humble manufacturing facility in Brooklyn New York Henry Repeating Arms began shipments of their first rifle: an affordable reliable and classically styled rimfire lever action designated the H001 Henry Classic Lever Action .22.

Today a quarter-century and more than a million H001’s later Henry Repeating Arms has grown to become America’s leading lever action manufacturer thanks in no small part to the “Made in America and Priced Right” rimfire lever-action rifle that started it all. Now they're proud to announce their salute to 25 years of the H001 with the stunning Classic Lever Action .22 25th Anniversary Edition.

This anniversary edition sports a polished nickel-plated receiver cover and barrel band engraved with traditional leafy vine scrollwork reminiscent of many prized presentation rifles of the 19th Century. The Henry 25th Anniversary emblem sits proudly on the right side of the receiver flanked by a gold-plated border. On the left side of the receiver cover the gold plating contrast continues with the “XXV” numerals reminding the owner that they’re holding a unique piece of American firearms history. A gold-accented darted rope border encapsulates the designs on both sides of the receiver cover.

It wouldn’t be an homage to the Classic Lever Action .22 without genuine American walnut furniture so for this edition Henry Repeating Arms selected pieces with natural figuring that’s every bit as striking as the embellished receiver cover. To make sure it shoots as good as it looks the rifle features an 18.5” blued steel barrel adjustable sights and the same exceptionally slick action that’s been winning over plinkers hunters and range goers for twenty-five years.

Limited to only 5000 pieces with unique serial numbers ranging from
0001HENRY25 to 5000HENRY25 this rifle is a celebration of the first chapter in Henry Repeating Arms' twenty-five-year story: the introduction of the Henry H001 America’s favorite rimfire lever action.

Features:

• Caliber: .17 HMR
• Capacity: 13 Runds
• Barrel Length: 20"
• Barrel Type: Octagon Blued Steel
• Rate of Twist: 1:9
• Overall Length: 38"
• Weight: 6.50 lbs.
• Receiver Finish: Black
• Rear Sight: Fully Adj. Semi-Buckhorn w/ Diamond Insert
• Front Sight: Brass Bead
• Scopeability: 3/8" Grooved Receiver
• Scope Mount Type: Ringmounts for 3/8" Groove
• Stock Material: American Walnut
• Stock/Grip Style: Straight Grip
• Length of Pull: 14"
• Safety: 1/4 Cock
• Best Uses: Target/Hunting/Small Game

The H1 Frontier Rifle & Carbine pairs Henry’s world-famous rimfire lever-action platform with a classic octagon barrel and traditional styling. The Frontier Rifle features an 20″ octagon barrel and is available in .22 Short/Long/Long Rifle .22 Magnum and .17 HMR offering everything from quiet plinking and small-game versatility to flat-shooting rimfire precision. For those who prefer a more compact package the Frontier Carbine is offered with a handier 16.5″ barrel in .22 S/L/LR and .22 Magnum delivering quicker handling without sacrificing the smooth action and accuracy the Frontier is known for.

To complete the period-correct look the H1 Frontier is equipped with an easy-to-adjust semi-buckhorn rear sight with a diamond insert paired with a highly visible brass bead front sight set in standard 3/8″ dovetail slots. A metal barrel band secures both the octagon barrel and the tubular magazine to a stock crafted from richly grained hand-finished American walnut.

While the styling may look straight out of the frontier era the H1 Frontier is ready for modern shooting preferences as well. The receiver is grooved to accept scope mounts allowing shooters to add optics while retaining the rifle’s classic character. Inside Henry’s famously smooth lever action ensures reliable feeding and effortless cycling making the Frontier as enjoyable to shoot as it is to admire.

Henry Repeating Arms, MFG# H001TLB, UPC: 619835011169, UOM: Each, Frontier Long Barrel, .22 S/L/LR, 24″ Octagon Barrel, Adjustable Sights, Blued/Walnut, 16-rd, HENR, HENRLG12, HENRLGALL, LG12, LGALL

Like stagecoaches swinging saloon doors and Pony Express riders many innovations of the Old West have long faded from everyday use living on only in Western movies and history books. But a select few frontier staples were so effective and so far ahead of their time that they remain just as relevant today.

One of those enduring designs is the octagon barrel a hallmark of the repeating rifles carried by cowpunchers lawmen homesteaders and outlaws alike. Valued for its added mass and stability the octagon barrel helped absorb heat and steady the rifle during extended shooting making it the clear forerunner to the heavy-profile barrels used on modern target and varmint rifles.

The H1 Frontier Rifle & Carbine pairs Henry’s world-famous rimfire lever-action platform with a classic octagon barrel and traditional styling. The Frontier Rifle features an 20″ octagon barrel and is available in .22 Short/Long/Long Rifle .22 Magnum and .17 HMR offering everything from quiet plinking and small-game versatility to flat-shooting rimfire precision. For those who prefer a more compact package the Frontier Carbine is offered with a handier 16.5″ barrel in .22 S/L/LR and .22 Magnum delivering quicker handling without sacrificing the smooth action and accuracy the Frontier is known for.

To complete the period-correct look the H1 Frontier is equipped with an easy-to-adjust semi-buckhorn rear sight with a diamond insert paired with a highly visible brass bead front sight set in standard 3/8″ dovetail slots. A metal barrel band secures both the octagon barrel and the tubular magazine to a stock crafted from richly grained hand-finished American walnut.

While the styling may look straight out of the frontier era the H1 Frontier is ready for modern shooting preferences as well. The receiver is grooved to accept scope mounts allowing shooters to add optics while retaining the rifle’s classic character. Inside Henry’s famously smooth lever action ensures reliable feeding and effortless cycling making the Frontier as enjoyable to shoot as it is to admire.

Blending Old West tradition with modern rimfire performance the H1 Frontier Rifle & Carbine stands as a tribute to a design that never needed improvement only preservation.

Made in the USA to Henry's exacting standards the H1 Mare’s Leg Pistol is offered in .22 Short/Long/Long Rifle and .22 Magnum giving shooters the option to choose between maximum versatility or a little extra punch. Both chamberings benefit from the smooth reliable Henry lever action delivering fast follow-up shots and an unmistakably satisfying shooting experience.

Each H1 Mare’s Leg features American walnut furniture shaped to echo the profile of the original television gun paired with a large loop lever for quick intuitive cycling. A receiver-mounted saddle ring adds authentic Western character while the compact design makes the Mare’s Leg exceptionally handy. Weighing just over four pounds and measuring approximately 25 inches overall it’s light portable and easy to carry.

Features:

• Action Type: Lever Action
• Caliber: .22 S/L/LR
• Capacity: 10 LR / 12 L / 14 S
• Barrel Length: 12.875"
• Barrel Type: Round Blued Steel
• Rate of Twist: 1:16
• Overall Length: 24.5"
• Weight: 4.45 lbs.
• Receiver Finish: Black
• Rear Sight: Fully Adj. Semi-Buckhorn
• Front Sight: Hooded Blade
• Scopeability: 3/8" Grooved Receiver
• Scope Mount Type: Ringmounts for 3/8" Groove
• Stock Material: American Walnut
• Stock/Grip Style: Straight Grip
• Buttplate/Pad: N/A
• Length of Pull: N/A
• Safety: 1/4 Cock
• Best Uses: Target
• Embellishments/Extras: Large Loop Lever