YOU MUST BE 18 OR OLDER TO ENTER

FEATURES
-Hogue Grip
-For:SIG Sauer
-For Models:P238
-Wrap around
-Over Molded Rubber
-WithFinger Grooves
-Purple

FEATURES
-HogueGrip
-For Ruger LCR
-Rubber
-No Finger Groove
-Tamer Cushion
-Pink
-Fits LCRx, LCRx 3″ barrel, and enclosed hammer LCR models

FEATURES
-HogueGrip
-For Ruger LCR
-Rubber
-With Finger Groove
-Tamer Cushion
-Pink
-Fits LCRx, LCRx 3″ barrel, and enclosed hammer LCR models

While some guns lend themselves to a grip with finger grooves some are more functional with simple panels. Grip sizes complement the particular handgun it was made for as small as possible on large double stack magazine guns and maybe a little fuller on small frames. (Rubber grip comes with three panels to fit models with Frame or slide mounted decocker)

FEATURES
-Hogue Grip
-For:Taurus Small Frame
-For Models:17, 85, 94, 605, 650,651,731, 850, 851, 905, & 941
-Monogrip
-Over Molded Rubber
-With Finger Grooves
-Pink

The Wrapter Adhesive Grip Material provides a customizable, high-traction surface for improved control and comfort. Featuring a heavy-grit texture and ultra-thin profile—30 percent thinner than a standard credit card—it enhances grip without adding bulk. The DIY sheet design allows versatile application across a variety of gear, while its cushioned layer absorbs impact without affecting your natural hold. Measuring 5 x 6.75 inches, this adhesive grit sheet delivers durable, non-slip performance in any condition.

THIS GRIP WILL ALSO FIT AND FUNCTION WELL ON THE FOLLOWING FIREARMS THOUGH NOT SPECIFICALLY DESIGNED FOR A PRECISION FIT: (LARGER FRAME MODELS WILL REQUIRE STRENUOUS EFFORT TO INSTALL GRIP)

Beretta Nano
Colt Mustang Lite Mustang Pocketlite
Diamondback DB380 DP9
Kahr P380
Remington RM380

FEATURES:
Fits Glock generations- 1, 2 & 5 (9MM, 357 SIG, 40 S&W, 45 GAP): G17, G17L, G17 MOS, G18, G19X, G20, G21, G22, G24,
G31, G34, G34 MOS, G35, G40, G41, G45
Gentle palm swells fit comfortably in hand
Finger grooves naturally position fingers for optimal grip
Textured with Hogue’s famous Cobblestone

FEATURES:
Fits: Glock generations- 3 & 4 (9MM, 357 SIG, 40 S&W, 45 GAP): G17, G17L, G17 MOS, G18, G20, G21, G22, G24, G31, G34, G34 MOS, G35, G35 MOS, G37, 40, 41
Gentle palm swells fit comfortably in hand
Finger grooves naturally position fingers for optimal grip
Textured with Hogue’s famous Cobblestone

FEATURES:
Fits: Glock generations- 1, 2 & 5 (9MM, 357 SIG, 40 S&W, 45 GAP): G19, G23, G32, G38
Gentle palm swells fit comfortably in hand
Finger grooves naturally position fingers for optimal grip
Textured with Hogue’s famous Cobblestone

FEATURES:
Fits: Glock generations- 3 & 4 (9MM, 357 SIG, 40 S&W, 45 GAP): G19, G23, G32, G38
Gentle palm swells fit comfortably in hand
Finger grooves naturally position fingers for optimal grip
Textured with Hogue’s famous Cobblestone

FEATURES:
-Beavertail grip sleeve
-Fits Glock 26/27
-Slides over current grip
-Black

FEATURES
-Black
-Fits Glock 42, 43
-HandAll beavertail grip sleeve

FEATURES:
-Black
-Fits Ruger LCP II
-Beavertail grip sleeve

FEATURES:
Fits: Ruger Security 9 standard models
Gentle palm swells fit comfortably in hand
Finger grooves naturally position fingers for optimal grip
Textured with Hogue’s famous Cobblestone

FEATURES:
Fits: Sig Sauer P365 models
Gentle palm swells fit comfortably in hand
Finger grooves naturally position fingers for optimal grip
Textured with Hogue’s famous Cobblestone

FEATURES:
Fits: Sig Sauer P365 models
Gentle palm swells fit comfortably in hand
Finger grooves naturally position fingers for optimal grip
Textured with Hogue’s famous Cobblestone

Hogue HandALL grip sleeves are designed to fit specific polymer pistols now on the market. "Polymer pistols do not have removable grips that you can simply replace" said grip designer Matt Hogue. The solution for many of these pistols is the HandALL Beavertail Grip Sleeves. The Beavertail Grip Sleeve line has been engineered with models for precision fits on specific firearms. The initial offerings in this series has sleeves designed for perfect fits on three sizes of polymer firearms. The first offering precisely fits Smith & Wesson's M&P Shield (9mm and .40 models) and Ruger LC9. The second sleeve fits Glock 42 and 43.

While each sleeve has been created for a precise fit on specific polymer framed firearms they also alternatively fit many other similarly sized firearms with a fully functional and aesthetic fit. These sleeves also provide a fit for many pistols that may not have any other alternative available on the market said Hogue.

Hogue HandALL grip sleeves are designed to fit specific polymer pistols now on the market. “Polymer pistols do not have removable grips that you can simply replace” said grip designer Matt Hogue. The solution for many of these pistols is the HandALL Beavertail Grip Sleeves. The Beavertail Grip Sleeve line has been engineered with models for precision fits on specific firearms. The initial offerings in this series has sleeves designed for perfect fits on three sizes of polymer firearms. The first offering precisely fits Smith & Wesson’s M&P Shield (9mm and .40 models) and Ruger LC9. The second sleeve fits Glock 42 and 43.

While each sleeve has been created for a precise fit on specific polymer framed firearms they also alternatively fit many other similarly sized firearms with a fully functional and aesthetic fit. These sleeves also provide a fit for many pistols that may not have any other alternative available on the market said Hogue.

Hogue HandALL grip sleeves are designed to fit specific polymer pistols now on the market. “Polymer pistols do not have removable grips that you can simply replace” said grip designer Matt Hogue. The solution for many of these pistols is the HandALL Beavertail Grip Sleeves. The Beavertail Grip Sleeve line has been engineered with models for precision fits on specific firearms. The initial offerings in this series has sleeves designed for perfect fits on three sizes of polymer firearms. The first offering precisely fits Smith & Wesson’s M&P Shield (9mm and .40 models) and Ruger LC9. The second sleeve fits Glock 42 and 43.

While each sleeve has been created for a precise fit on specific polymer framed firearms they also alternatively fit many other similarly sized firearms with a fully functional and aesthetic fit. These sleeves also provide a fit for many pistols that may not have any other alternative available on the market said Hogue.

SPECS
• Precision fit for S&W M&P 9 Shield Plus
• Material: Rubber
• Texture: Cobblestone
• Color: Olive Drab Green

FEATURES
• Gentle palm swells fit comfortably in hand
• Finger grooves naturally position fingers for optimal grip
• Textured with Hogue's famous Cobblestone pattern for increased comfort and grip
• Beavertail cushions the hand on recoil and offers increased hand comfort higher on the grip
• Made from long lasting durable thermoplastic elastomer that ages gracefully for years of service
• Designed for a tight and secure fit engaging with the texture and contours of the firearm's frame

FEATURES:
-Black
-Fits Smith & Wesson Bodyguard .380
-Beavertail grip sleeve