This single-piece grip slides on revolver frames from the bottom requiring no modification to the firearm. A patented steel “stirrup” device clips over the existing stock pin or bottom strap of the frame. The stirrup is the key component in the system that adapts the grip to the gun handle. Monogrip allows a high handhold on the backstrap which lowers the bore line reducing muzzle rise in recoil and aiding rapid-fire recovery time especially when using a two-hand hold. Palm swells are ambidextrous allowing equal comfort and control for either right- or left- handed shooters.

While some guns lend themselves to a grip with finger grooves some are more functional with simple panels. Grip sizes complement the particular handgun it was made for as small as possible on large double stack magazine guns and maybe a little fuller on small frames.

FEATURES
-Hogue Grip
-For: Smith & WessonJ Frame Round Butt, Centennial and Polymer Bodyguard Tamer Grip
-Over Molded Rubber
-With Finger Grooves
-Pink

FEATURES
-Hogue Grip
-For: Smith & WessonJ Frame Round Butt, Centennial and Polymer Bodyguard Tamer Grip
-Over Molded Rubber
-With Finger Grooves
-Purple

Bantam Grips – Ultra light and compact
Bantam grips are the lightest and most compact rubber grips available. In fact a J frame Bantam grip weights only 1.4 ounces making it at last .8 ounces less than the nearest competitive grip. Using a revolutionary Patented Hogue design these ultra light grips simply snap onto the gun requiring no screws or metal parts.

Bantam grips do not extend below the grip frame for maximum concealability. The design finger grooves and Cobblestone finish improve control and evenly distribute recoil. Bantam Grips are currently designed for Smith & Wesson K&L and J Round Butt revolvers.

This single-piece grip slides on revolver frames from the bottom requiring no modification to the firearm. A patented steel “stirrup” device clips over the existing stock pin or bottom strap of the frame. The stirrup is the key component in the system that adapts the grip to the gun handle. Monogrip allows a high handhold on the backstrap which lowers the bore line reducing muzzle rise in recoil and aiding rapid-fire recovery time especially when using a two-hand hold. Palm swells are ambidextrous allowing equal comfort and control for either right- or left- handed shooters.

FEATURES
-Hogue Grip
-For:SIG Sauer
-For Models:P238
-Wrap around
-Over Molded Rubber
-WithFinger Grooves
-Purple

FEATURES
-HogueGrip
-For Ruger LCR
-Rubber
-No Finger Groove
-Tamer Cushion
-Pink
-Fits LCRx, LCRx 3″ barrel, and enclosed hammer LCR models

FEATURES
-HogueGrip
-For Ruger LCR
-Rubber
-With Finger Groove
-Tamer Cushion
-Pink
-Fits LCRx, LCRx 3″ barrel, and enclosed hammer LCR models

While some guns lend themselves to a grip with finger grooves some are more functional with simple panels. Grip sizes complement the particular handgun it was made for as small as possible on large double stack magazine guns and maybe a little fuller on small frames. (Rubber grip comes with three panels to fit models with Frame or slide mounted decocker)

FEATURES
-Hogue Grip
-For:Taurus Small Frame
-For Models:17, 85, 94, 605, 650,651,731, 850, 851, 905, & 941
-Monogrip
-Over Molded Rubber
-With Finger Grooves
-Pink

The Wrapter Adhesive Grip Material provides a customizable, high-traction surface for improved control and comfort. Featuring a heavy-grit texture and ultra-thin profile—30 percent thinner than a standard credit card—it enhances grip without adding bulk. The DIY sheet design allows versatile application across a variety of gear, while its cushioned layer absorbs impact without affecting your natural hold. Measuring 5 x 6.75 inches, this adhesive grit sheet delivers durable, non-slip performance in any condition.

Hogue’s Piranha G10 G-Mascus Grips for the Sig Sauer P226 are made from high strength G-10 composite. The materials used in the production of these grips make for a product that is both strong and durable. These extreme G-10 grips are unique in that they are very thin and the lower profile presents the shooter with a comfortable and controllable grip. Extreme grips combine fit, form and function into a single product for the ultimate shooting experience. Fits DA/SA models with decocker, as well as DAK models. Does not fit Legion models.

Hogue’s Piranha G10 G-Mascus Grips for the Sig Sauer P229 are made from high strength G-10 composite. The materials used in the production of these grips make for a product that is both strong and durable. These extreme G-10 grips are unique in that they are very thin and the lower profile presents the shooter with a comfortable and controllable grip. Extreme grips combine fit, form and function into a single product for the ultimate shooting experience. Fits DA/SA models with decocker, as well as DAK models. Does not fit Legion models.

THIS GRIP WILL ALSO FIT AND FUNCTION WELL ON THE FOLLOWING FIREARMS THOUGH NOT SPECIFICALLY DESIGNED FOR A PRECISION FIT: (LARGER FRAME MODELS WILL REQUIRE STRENUOUS EFFORT TO INSTALL GRIP)

Beretta Nano
Colt Mustang Lite Mustang Pocketlite
Diamondback DB380 DP9
Kahr P380
Remington RM380

FEATURES:
Fits Glock generations- 1, 2 & 5 (9MM, 357 SIG, 40 S&W, 45 GAP): G17, G17L, G17 MOS, G18, G19X, G20, G21, G22, G24,
G31, G34, G34 MOS, G35, G40, G41, G45
Gentle palm swells fit comfortably in hand
Finger grooves naturally position fingers for optimal grip
Textured with Hogue’s famous Cobblestone

FEATURES:
Fits: Glock generations- 3 & 4 (9MM, 357 SIG, 40 S&W, 45 GAP): G17, G17L, G17 MOS, G18, G20, G21, G22, G24, G31, G34, G34 MOS, G35, G35 MOS, G37, 40, 41
Gentle palm swells fit comfortably in hand
Finger grooves naturally position fingers for optimal grip
Textured with Hogue’s famous Cobblestone

FEATURES:
Fits: Glock generations- 1, 2 & 5 (9MM, 357 SIG, 40 S&W, 45 GAP): G19, G23, G32, G38
Gentle palm swells fit comfortably in hand
Finger grooves naturally position fingers for optimal grip
Textured with Hogue’s famous Cobblestone

FEATURES:
Fits: Glock generations- 3 & 4 (9MM, 357 SIG, 40 S&W, 45 GAP): G19, G23, G32, G38
Gentle palm swells fit comfortably in hand
Finger grooves naturally position fingers for optimal grip
Textured with Hogue’s famous Cobblestone

FEATURES:
-Beavertail grip sleeve
-Fits Glock 26/27
-Slides over current grip
-Black

FEATURES
-Black
-Fits Glock 42, 43
-HandAll beavertail grip sleeve

FEATURES:
-Black
-Fits Ruger LCP II
-Beavertail grip sleeve