While some guns lend themselves to a grip with finger grooves some are more functional with simple panels. Grip sizes complement the particular handgun it was made for as small as possible on large double stack magazine guns and maybe a little fuller on small frames.

HOGUE RUBBER GRIP SIG P238 W/Finger Grooves

Hogue rubber grips are molded from durable synthetic rubber that is neither spongy nor tacky yet provides a soft recoil absorbing feel without affecting accuracy. This modern rubber requires a completely different molding process than ordinary neoprene resulting in a much superior grip. The flexibility of our materials and molding process has allowed us to produce rubber grips with features that out perform all other makes.

This Pillar Bedding stock fits Savage 110, 111, 114 and 116 long actions with top-loading box magazines and a standard barrel channel. Pillar bedding uses aluminum bosses at critical mounting locations to provide an accurate, solid fit that resists loosening and conforms to the rifle action. The design improves rock-solid stability through the length of the stock for consistent accuracy. Straightforward installation preserves factory mounting geometry.

FEATURES
-HogueOverMolded Stock
-For Ruger10-22
-Purple
-For .920″ Diameter Barrel
-Polymer/Rubber
-Does not use the original barrel band
-Stock uses original stock attachment screw
-Will not fit look-alike lever action model rifle
-Length of Pull: 13 3/4”
-Distance between sling holes is 25″

FEATURES
-HogueOverMolded Stock
-For Ruger10-22
-Purple
-Standard Barrel
-Polymer/Rubber
-Does not use the original barrel band
-Stock uses original stock attachment screw
-Will not fit look-alike lever action model rifle
-Length of Pull: 13 3/4”
-Distance between sling holes is 25”

Hogue’s Tamer grip replaces the standard Mossberg 500 pistol grip with an ergonomic overmolded design that tames recoil. The compound palm swell and proportioned finger grooves guide your hand naturally, while the internal Sorbothane insert dampens magnum loads. Works on 500, 590, and 835 models in either gauge.

Specs

• Fit: Mossberg 500, 590, 835
• Gauge: 12 and 20 gauge
• Material: Overmolded rubber with Sorbothane
• Color: Black
• Weight: 6.23 oz
• Feature: Recoil-dampening insert
• Installation: Short bolt included, no washer needed

Questions about fitment or availability? Give the shop a call and we’ll walk you through it.

Hogue OverMolded Shotgun pistol grips feature our new Tamer? grip technology used on the Smith & Wesson 500. Hogue manufactures the grip used on the 500 which incorporates a special Tamer insert under the web of the hand. For those who have shot the 500 you know this grip works! The exclusive Hogue Tamer? pistol grip features Hogues’ famous orthopedic hand shape with compound palm swells and proportioned finger grooves and utilizes an internal Tamer recoil cushion that dampens the painful recoil of magnum loads.

Hogue OverMolded Shotgun pistol grips feature our new Tamer? grip technology used on the Smith & Wesson 500. Hogue manufactures the grip used on the 500 which incorporates a special Tamer insert under the web of the hand. For those who have shot the 500 you know this grip works! The exclusive Hogue Tamer? pistol grip features Hogues’ famous orthopedic hand shape with compound palm swells and proportioned finger grooves and utilizes an internal Tamer recoil cushion that dampens the painful recoil of magnum loads.

This single-piece grip slides on revolver frames from the bottom requiring no modification to the firearm. A patented steel “stirrup” device clips over the existing stock pin or bottom strap of the frame. The stirrup is the key component in the system that adapts the grip to the gun handle. Monogrip allows a high handhold on the backstrap which lowers the bore line reducing muzzle rise in recoil and aiding rapid-fire recovery time especially when using a two-hand hold. Palm swells are ambidextrous allowing equal comfort and control for either right- or left- handed shooters.

This single-piece grip slides on revolver frames from the bottom requiring no modification to the firearm. A patented steel “stirrup” device clips over the existing stock pin or bottom strap of the frame. The stirrup is the key component in the system that adapts the grip to the gun handle. Monogrip allows a high handhold on the backstrap which lowers the bore line reducing muzzle rise in recoil and aiding rapid-fire recovery time especially when using a two-hand hold. Palm swells are ambidextrous allowing equal comfort and control for either right- or left- handed shooters.

SPECS
+ Precision fit for Taurus Raging Bull Raging Hunter & Raging Judge
+ Material: Rubber
+ Texture: Cobblestone
+ Color: Black

FEATURES
+ Gentle palm swells fit comfortably in hand
+ Finger grooves naturally position fingers for optimal grip
+ Textured with Hogue's famous Cobblestone pattern for increased comfort and grip
+ Made from long lasting durable thermoplastic elastomer that ages gracefully for years of service
+ Designed for a tight and secure fit engaging with the texture and contours of the firearm's frame

This single-piece grip slides on revolver frames from the bottom requiring no modification to the firearm. A patented steel “stirrup” device clips over the existing stock pin or bottom strap of the frame. The stirrup is the key component in the system that adapts the grip to the gun handle. Monogrip allows a high handhold on the backstrap which lowers the bore line reducing muzzle rise in recoil and aiding rapid-fire recovery time especially when using a two-hand hold. Palm swells are ambidextrous allowing equal comfort and control for either right- or left- handed shooters.

Made in the United States, Hogue Knives builds on and continues the family legacy of precision manufacturing fine firearm accessories for over 50 years. Hogue celebrates its 10th year in the knife industry, with models ranging from manuals to automatics, fixed blades and tomahawks.

Hogue’s revolutionary O.M.ª series stocks are made similar to the popular rubber grips. Constructed by molding a super strong rigid fiberglass reinforced stock that precisely fits the rifle action. Then the stock is OverMolded with the same rubber as on Hogue grips that results in a comfortable non slip super smooth attractive finish. These stocks feature a sleek straight comb palm swells and a “varminter” style forend which is treated with a unique “Cobblestone” texture. All centerfire rifle stocks are equipped with a recoil pad. All centerfire bolt action models come standard with aluminum pillar bedding in the stock

SPECS
+ Precision fit for GLOCK 17 17MOS 34MOS 45 45MOS 19X (Gen 5) – No Backstrap
+ Material: Adhesive rubber
+ Texture: Block

FEATURES
+ Renowned Hogue rubber feel
+ Ultra thin profile – 30% thinner than a standard credit card
+ Engineered to conform to the exact contours of your firearm's frame
+ Multi-piece design provides optimal coverage
+ Left-over remnant material offers customization options

SPECS
+ Precision fit for GLOCK 17 17L 18 22 24 31 34 35 37 (Gen 3)
+ Material: Adhesive rubber
+ Texture: Block

FEATURES
+ Renowned Hogue rubber feel
+ Ultra thin profile – 30% thinner than a standard credit card
+ Engineered to conform to the exact contours of your firearm's frame
+ Multi-piece design provides optimal coverage
+ Left-over remnant material offers customization options

SPECS
+ Precision fit for GLOCK 43X 48
+ Material: Adhesive rubber
+ Texture: Grain

FEATURES
+ Renowned Hogue rubber feel
+ Ultra thin profile – 30% thinner than a standard credit card
+ Engineered to conform to the exact contours of your firearm's frame
+ Multi-piece design provides optimal coverage
+ Left-over remnant material offers customization options

SPECS
+ Precision fit for Heckler & Koch VP9 & VP40 – Medium Grip Module
+ Material: Adhesive rubber
+ Texture: Block

FEATURES
+ Renowned Hogue rubber feel
+ Ultra thin profile – 30% thinner than a standard credit card
+ Engineered to conform to the exact contours of your firearm's frame
+ Multi-piece design provides optimal coverage
+ Left-over remnant material offers customization options

SPECS
+ Precision fit for Ruger Security-9 Standard
+ Material: Adhesive rubber
+ Texture: Grain

FEATURES
+ Renowned Hogue rubber feel
+ Ultra thin profile – 30% thinner than a standard credit card
+ Engineered to conform to the exact contours of your firearm's frame
+ Multi-piece design provides optimal coverage
+ Left-over remnant material offers customization options

SPECS
+ Precision fit for Smith & Wesson Bodyguard 2.0
+ Material: Adhesive rubber
+ Texture: Block

FEATURES
+ Renowned Hogue rubber feel
+ Ultra thin profile – 30% thinner than a standard credit card
+ Engineered to conform to the exact contours of your firearm's frame
+ Multi-piece design provides optimal coverage
+ Left-over remnant material offers customization options

SPECS
+ Precision fit for SIG SAUER P365-XMACRO
+ Material: Adhesive rubber
+ Texture: Grain

FEATURES
+ Renowned Hogue rubber feel
+ Ultra thin profile – 30% thinner than a standard credit card
+ Engineered to conform to the exact contours of your firearm's frame
+ Multi-piece design provides optimal coverage
+ Left-over remnant material offers customization options

SPECS
+ Precision fit for SIG SAUER P365-XMACRO
+ Material: Adhesive rubber
+ Texture: Block

FEATURES
+ Renowned Hogue rubber feel
+ Ultra thin profile – 30% thinner than a standard credit card
+ Engineered to conform to the exact contours of your firearm's frame
+ Multi-piece design provides optimal coverage
+ Left-over remnant material offers customization options

SPECS
+ Precision fit for SIG SAUER P365X & XL
+ Material: Adhesive rubber
+ Texture: Block

FEATURES
+ Renowned Hogue rubber feel
+ Ultra thin profile – 30% thinner than a standard credit card
+ Engineered to conform to the exact contours of your firearm's frame
+ Multi-piece design provides optimal coverage
+ Left-over remnant material offers customization options