Straight from the mind of a master the Barber’s Cut Mouth Call is Harold Knight’s favorite cut of all time. This easy to use two reed call offers crisp clear yelps on the front end with a touch of rasp on the back end. Callers of all skill levels can purr cluck and yelp their way through the turkey woods with this uniquely cut mouth call only offered from Knight & Hale.

Specifications:

Two Reeds
Reeds: Prophylactic
Frame: Aluminum
Handmade in the U.S.A.
Designed by Harold Knight

TECHNIQUE:

Place the call in the roof of your mouth with the printed K&H logo on top and the reeds facing out.
Place your tongue against the reeds then apply pressure.
Push air from your throat to produce notes.

Yelp: With pressure applied to reed say the words "chick" or "chuck" with even rhythm.
Cluck: With pressure applied to reed say the word "puck" with even rhythm.

If the call feels too large for your mouth trim tape up to 1/16".

Call those toms in at long range with the Batwing Mouth Call. Producing deep clear tones this call allows you to make all the standard sounds a hen does. The three reed hands-free design will keep you ready for when the birds come running. So whether you’re clucking purring or yelping the Batwing’s got your back.

Specifications:

Three Reeds
Reeds: Latex
Frame: Aluminum
Handmade in the U.S.A.

TECHNIQUE:

Place the call in the roof of your mouth with the printed K&H logo on top and the reeds facing out.
Place your tongue against the reeds then apply pressure.
Push air from your throat to produce notes.

Kee-Kee: With pressure applied to the reed say word “kee-kee” with even rhythm.
Yelp: With pressure applied to reed say the words "chick" or "chuck" with even rhythm.
Cluck: With pressure applied to reed say the word "puck" with even rhythm.

If the call feels too large for your mouth trim tape up to 1/16".

The Knight and Hale Death Chamber is an all-in-one deer call built to produce a wide range of vocalizations throughout the season. It covers fawn bleats, doe calls, mature buck grunts, and snort wheezes in a single adjustable design. The reed can be adjusted one-handed in real time without disassembly, allowing quick changes in sound. A malleable sound chamber provides control over pitch and volume, and the call is handmade in the USA.

Aluminum and glass a deadly combo. The Double Up Aluminum/Glass Pot Call is made from injection-molded polymer that's durable ready to stand up to the toughest hunts. The aluminum top offers sharp high-pitched volume for far off calling while the glass bottom allows you to get clear and soft when the gobblers get in close. No need to worry about concealment with the Double Up’s Mossy Oak Greenleaf finish. Condition your striking surfaces as needed using the included scouring pad to get your preferred sounds. Check out our recommended pot call techniques below.

Specifications:

Call type: Pot call
Surface:
- Top: Aluminum
- Bottom: Glass
Pot Material: Polymer
Striker Material: Hickory
Camo: Mossy Oak Greenleaf
Includes scouring pad
Handmade in the U.S.A.

TECHNIQUE:

For the best results:

Make sure the call is appropriately conditioned with the included scouring pad.
Hold the call away from your body; cup it between your index finger and thumb.
Hold the striker like a pencil at a 70-degree angle to call; rest your other fingers solidly against the call.
Apply light pressure from the striker when calling.

For the most consistent pitches and tone use the upper third of the call. The center of the call produces deeper tones.

Cackle: Move striker in straight quick ¼" lines 7 to 10 times.
Cluck: Move striker very quickly in straight ¼" lines using popping motion.
Cut: Move striker very quickly in straight ¼" lines with broken rhythm (ex. 3 notes 2 notes 4 notes).
Purr: Slowly slide striker in a straight 1" line across surface. Hold striker higher for more consistent sound. Use scouring pad to create additional friction as needed.
Yelp: Move striker in a short oval or circular motion in ½" lines producing a two-tone yelp 5 to 7 times in each sequence.

The Knight and Hale EZ-Grunter is a classic deer call designed to create a wide range of realistic grunt tones. Its five-point EZ adjustable reed lets you shift from higher-pitched fawn sounds to deeper mature buck grunts without changing calls. An extendable tube allows further control over tone and volume for dialing in the sound you want. It includes a lanyard for convenient carry in the field.

The Knight and Hale EZ-Grunter Xtreme is a versatile deer call built to produce a broad range of realistic vocalizations. Its six-point adjustable reed system covers soft fawn bleats, doe calls, and deep buck grunts. A malleable rubber tube allows quick changes to pitch and tone for adapting to different scenarios. The two-way reed design supports natural sounds when blowing or inhaling, including rapid sequences to mimic pursuit activity, and it is handmade in the USA.

The Knight & Hale Ghost Cut Mouth Call is a great option for turkey hunters of any level of experience looking for a higher pitch call with a touch of rasp. Perfect for mimicking an immature bird with kee-kee runs and soft-calling the combination of sound variety with its hands-free operation makes this an ideal call to run when you’re ready to pull the trigger.

Specifications:

Three Reeds
Reeds: Latex
Frame: Aluminum
Handmade in the U.S.A.

TECHNIQUE:

Place the call in the roof of your mouth with the printed K&H logo on top and the reeds facing out.
Place your tongue against the reeds then apply pressure.
Push air from your throat to produce notes.

If the call feels too large for your mouth trim tape up to 1/16".

With the classic soft clucks and purrs of a Ghost Cut and the loud and aggressive yelps and cuts of a Split V the Ghost Split V Mouth Call offers a versatile range for any hunter in the turkey woods. The high-pitched clear sound allows you to imitate kee-kee runs as well. The range not only in sound but in volume will allow you to remain confident on the trigger for when your target tom steps

Specifications:

Three Reeds
Reeds: Latex
Frame: Aluminum
Handmade in the U.S.A.

TECHNIQUE:

Place the call in the roof of your mouth with the printed K&H logo on top and the reeds facing out.
Place your tongue against the reeds then apply pressure.
Push air from your throat to produce notes.

If the call feels too large for your mouth trim tape up to 1/16".

Looking for a call with long-distance volume and rugged durability? Look no further than the Glass Hammer. The glass surface of this call offers great sound clarity with a wide range of yelps cluck cuts and purrs that work well at any range. The polymer pot construction makes this a perfect call for a hunter operating in rough terrain. Economically priced this is perfect for beginners or someone looking to try a glass call for the first time though the sound quality that can be achieved is perfect for hunters of any skill level. Condition the striking surface to your liking with the included scouring pad and touch up on the basic techniques below.

Specifications:

Call type: Pot call
Surface: Glass
Pot Material: Polymer
Striker Material: Hickory
Includes scouring pad
Handmade in the U.S.A.

TECHNIQUE:

For the best results:

Make sure the call is appropriately conditioned with the included scouring pad.
Hold the call away from your body; cup it between your index finger and thumb.
Hold the striker like a pencil at a 70-degree angle to call; rest your other fingers solidly against the call.
Apply light pressure from the striker when calling.

For the most consistent pitches and tone use the upper third of the call. The center of the call produces deeper tones.

Cackle: Move striker in straight quick ¼" lines 7 to 10 times.
Cluck: Move striker very quickly in straight ¼" lines using popping motion.
Cut: Move striker very quickly in straight ¼" lines with broken rhythm (ex. 3 notes 2 notes 4 notes).
Purr: Slowly slide striker in a straight 1" line across surface. Hold striker higher for more consistent sound. Use scouring pad to create additional friction as needed.
Yelp: Move striker in a short oval or circular motion in ½" lines producing a two-tone yelp 5 to 7 times in each sequence.

For those who remember this call is the “Magic Mooncutter” reborn — For those that don’t this is a call that can do it all. Designed by Harold Knight the Half Moon Cutter allows a hunter to make any sound a hen could make but really shines with its high-pitched yelps and aggressive cuts. The versatility and hand-free nature of this call allows you to get up-close and personal with those tricky toms.

Specifications:

3.5 Reeds
Reeds: Latex
Frame: Aluminum
Handmade in the U.S.A.
Designed by Harold Knight

TECHNIQUE:

Place the call in the roof of your mouth with the printed K&H logo on top and the reeds facing out.
Place your tongue against the reeds then apply pressure.
Push air from your throat to produce notes.

Yelp: With pressure applied to reed say the words "chick" or "chuck" with even rhythm.
Cluck: With pressure applied to reed say the word "puck" with even rhythm.

If the call feels too large for your mouth trim tape up to 1/16".

The Half Moon Split V is a combination of the Half Moon Cutter and Split V creating a clear sound with very little rasp. Not only made for producing smooth cuts and high-pitched yelps but this call is also a hunter’s go-to choice as a kee-kee call. The three-reed aluminum frame hand-free design keeps you confident and prepared to take your shot at the bird of a lifetime.

Specifications:

Three Reeds
Reeds: Latex
Frame: Aluminum
Handmade in the U.S.A.

TECHNIQUE:

Place the call in the roof of your mouth with the printed K&H logo on top and the reeds facing out.
Place your tongue against the reeds then apply pressure.
Push air from your throat to produce notes.

If the call feels too large for your mouth trim tape up to 1/16".

With the HD Crystal Surface Pot Call you can produce consistent loud calling sequences that carry over long distances and in windy conditions. Get true-to-life sharp sounds thanks to the combo of the crystal cherry pot and hand-matched cherry striker. Mimic a range of tones from high-pitched aggressive yelps down to low-pitched purrs and clucks.

Re-condition the striking surface as needed using the included sandpaper to get your preferred sounds. See technique tips below.

Specifications

Call type: Pot call
Surface: Crystal
Pot material: Cherry
Striker material: Cherry
Includes sandpaper
Handmade in the U.S.A.

TECHNIQUE

For the best results:

The striking surface is pre-conditioned but it will need to be refreshed occasionally with the included sandpaper.
Hold the call away from your body; cup it between your index finger and thumb.
Hold the striker like a pencil at a 70-degree angle to call; rest your other fingers solidly against the call.
Apply light pressure from the striker when calling.

For the most consistent pitches and tone use the upper third of the call. The center of the call produces deeper tones.

Cackle: Move striker in straight quick ¼" lines 7 to 10 times.
Cluck: Move striker very quickly in straight ¼" lines using popping motion.
Cut: Move striker very quickly in straight ¼" lines with broken rhythm (ex. 3 notes 2 notes 4 notes).
Purr: Slowly slide striker in a straight 1" line across surface. Hold striker higher for more consistent sound. Use scouring pad to create additional friction as needed.
Yelp: Move striker in a short oval or circular motion in ½" lines producing a two-tone yelp 5 to 7 times in each sequence.

The HD Cutter Push/Pull Call is the perfect call to add to your arsenal if you're looking for simplicity consistency and convenience. This is one of the easiest calls to use; you only need one finger to create authentic yelps clucks cuts and purrs making it ideal for turkey hunters of any skill level.

This friction call is a great closing call whose sounds will resonate even when it's windy. See our technique tips below.

Specifications

Call type: Push/pull call
Body material: Cherry
Handmade in the U.S.A.

TECHNIQUE

Yelp: Use finger to push the dowel 5 to 10 times with 1" strokes.
Cluck: Push the dowel using quick ¼" single taps.
Cut: Push the dowel 3 to 5 times in quick succession using short ¼" strokes.
Purr: Slowly push the dowel in one 1½" stroke with your index finger.
Fighting Purr: You'll need 2 HD Cutter Push/Pull calls for this. Hold 1 call in each hand and alternate pushing the dowels with your index fingers.

A must-have in your turkey calling arsenal! The HD Long Range Hen Box Call checks some of the most important boxes:

Easy to use
Versatile
Loud
Realistic

This basic friction call is easy to operate good for novice turkey hunters and old pros alike. Because this call is double-sided you can mimic the tones of two different hens increasing your chances of locating and fooling wise gobblers. Whether you're calling at close range or over a longer distance you can adjust the pressure and speed of the paddle for volume and pitch control. When you need the loudness to carry and cut through heavy wind this call has you covered. Practice different techniques to create a variety of volumes tones and pitches to make your calling even more authentic.

Specifications:

Call type: Box call
Lid: Cherry
Body: Cherry walnut
Handmade in the U.S.A.

Technique:

Cluck: Pop the paddle off the body's lip with short strokes.
Yelp: Slide the paddle across the body's lip in longer strokes in succession.
Cutting: Cluck repeatedly in fast numerous bursts.
Purr: Slowly slide the paddle across the body with little downward pressure.
Gobble: Wrap a rubber band around the paddle and rest of the box call then hold the body with the handle facing upward and shake the call back and forth without touching the lid.

Hands-free mouth/diaphragm turkey call
Three reeds and combo cut design
Mimics a wide variety of turkey vocalizations making it a great all-around call
Produce soft clucks and purrs all the way up to loud raspy cuts and yelps

Mimic a variety of turkey vocalizations with the HD Slate Surface Pot Call! The combination of its slate surface texture walnut pot and hand-matched hickory striker gives you the ability to easily create precise varied sounds including soft purrs and clucks for close-range hunting up to loud yelps for longer distances.

Condition the striking surface as needed using the included scouring pad to get your preferred sounds. See technique tips below.

Specifications

Call type: Pot call
Surface: Slate
Pot material: Walnut
Striker material: Hickory
Includes scouring pad
Handmade in the U.S.A.

TECHNIQUE

For the best results:

Make sure the call is appropriately conditioned with the included scouring pad.
Hold the call away from your body; cup it between your index finger and thumb.
Hold the striker like a pencil at a 70-degree angle to call; rest your other fingers solidly against the call.
Apply light pressure from the striker when calling.

For the most consistent pitches and tone use the upper third of the call. The center of the call produces deeper tones.

Cackle: Move striker in straight quick ¼" lines 7 to 10 times.
Cluck: Move striker very quickly in straight ¼" lines using popping motion.
Cut: Move striker very quickly in straight ¼" lines with broken rhythm (ex. 3 notes 2 notes 4 notes).
Purr: Slowly slide striker in a straight 1" line across surface. Hold striker higher for more consistent sound. Use scouring pad to create additional friction as needed.
Yelp: Move striker in a short oval or circular motion in ½" lines producing a two-tone yelp 5 to 7 times in each sequence.

The Ol' Yeller SLA-TEK Surface Pot Call is tough to beat when it comes to realism reliability and ease of use. No matter your experience level the Ol' Yeller produces effective and resonant clucks purrs cuts cackles and yelps. The triple-threat combo (custom SLA-TEK ceramic surface + walnut pot + two-piece yellowheart striker) gives you the ability to vary the frequency tone raspiness and clarity of your calls depending on the conditions in the field helping you bring those gobblers into gun range.

Condition the striking surface as needed using the included scouring pad to get your preferred sounds. For some tips to get you started check out our technique info below.

Specifications

Call type: Pot call
Surface: SLA-TEK ceramic
Pot material: Walnut
Striker material: Yellowheart
Includes scouring pad
Handmade in the U.S.A.

TECHNIQUE

For the best results:

Make sure the call is appropriately conditioned with the included scouring pad.
Hold the call away from your body; cup it between your index finger and thumb.
Hold the striker like a pencil at a 70-degree angle to call; rest your other fingers solidly against the call.
Apply light pressure from the striker when calling.

For the most consistent pitches and tone use the upper third of the call. The center of the call produces deeper tones.

Cackle: Move striker in straight quick ¼" lines 7 to 10 times.
Cluck: Move striker very quickly in straight ¼" lines using popping motion.
Cut: Move striker very quickly in straight ¼" lines with broken rhythm (ex. 3 notes 2 notes 4 notes).
Purr: Slowly slide striker in a straight 1" line across surface. Hold striker higher for more consistent sound. Use scouring pad to create additional friction as needed.
Yelp: Move striker in a short oval or circular motion in ½" lines producing a two-tone yelp 5 to 7 times in each sequence.

The Knight and Hale One-Piece Striker is a hand-turned pot call striker built for consistent control and tone. Its one-piece construction with a flared tip is balanced for comfortable handling and steady calling. Designed to pair with a wide range of pot calls, it helps produce smooth, rich turkey sounds with clean transitions. A simple, durable striker option suited for both new and experienced hunters.

You'll know the instant you put on the Run N' Gun 200 that it isn't the typical hunting vest. First you can guarantee a good fit thanks to its 10-point adjustment system. With adjustments from the shoulders to your chest belly and lumber the Run N' Gun 200 is designed to stay in place without bagginess. This means you won't get constantly caught on limbs and any gear won't cause the vest to shift.

At just 1.5 lbs. the Run N' Gun 200 is one of the lightest on the market; you'll hardly know its there. The cinching system keeps the comfy removable six-layer cushioned seat against your butt for an easy sit-down or you can tuck it out of the way when it's not needed. Its built-in 198-cubic-inch backpack is also bladder compatible.

For gear storage the vest features four zippered pouches and five additional pockets for easy access to pot calls box calls strikers diaphragms your phone and any other accessory a turkey hunter could need. The incorporated MOLLE system allows for added pouches and more. You'll also get a decoy sling. Using a slip knot around the decoy's neck and a set loop around the tail the decoy sling can be quickly thrown over your head to keep decoy(s) secure againt your back while you chase birds.

This model comes in Mossy Oak Greenleaf.

Weight: 1.5 lbs.
Camo pattern: Mossy Oak® Greenleaf®
Integrated backpack: 198-cubic-inch
Multiple pockets for calls accessories and more
Removable seat cushion
Includes decoy sling
MOLLE system connections

This model comes in Mossy Oak Original Bottomland.

Weight: 1.5 lbs.
Camo pattern: Mossy Oak Original Bottomland
Integrated backpack: 198-cubic-inch
Multiple pockets for calls accessories and more
Removable seat cushion
Includes decoy sling
MOLLE system connections

Not a minimalist? Bring it all with the Run N’ Gun 300 Turkey Vest from Knight & Hale. This vest is the pinnacle for the hunter that likes to hunt efficiently prepared and coming in at just 2.5 lbs. you’ll hardly notice it as you trek the turkey woods.

The Run N’ Gun 300 offers an immense level of storage. Featuring nine zippered pockets a 375-cubic-inch backpack capable of holding a water bladder designated spaces for pot calls mouth calls a box call strikers 12/20/410 gauge shotgun shells a Thermacell a phone and a water bottle for good measure – the question isn’t “What should I leave behind?” it’s “Why should I leave anything behind?”

The semi-rigid back and six-layer cushioned seat offer tremendous support whether you’ve found your spot for the morning or need to find a nearby tree quickly – and with 10-points of adjustment you can be sure it will stay true to form from start to finish. Carry efficiently and hunt smarter with the Run N’ Gun 300 from Knight & Hale.

This model comes in Mossy Oak Original Bottomland camo.

Large carrying capacity to weight ratio at just 2.5 lbs.
10-point adjustment system for optimal fit
Hold-tight cinching seat system
Removable six-layer cushioned seat
375-cubic-inch backpack with bladder compatibility and quick-access zipper
9 zippered pockets on the front

This model comes in Mossy Oak Full Foliage camo.

Large carrying capacity to weight ratio at just 2.5 lbs.
10-point adjustment system for optimal fit
Hold-tight cinching seat system
Removable six-layer cushioned seat
375-cubic-inch backpack with bladder compatibility and quick-access zipper
9 zippered pockets on the front

The Slate Hammer is a durable injection-molded polymer pot call perfect for those working in difficult terrain where a call may be damaged. At an economical price point this call is perfect for beginners but has a robust sound range of yelp clucks cuts and purrs that any hunter would be happy to have in the turkey woods. Condition the striking surface as needed using the included scouring pad to get your preferred sounds. To learn the basics read our listed techniques below.

Specifications:

Call type: Pot call
Surface: Slate
Pot Material: Polymer
Striker Material: Hickory
Includes scouring pad
Handmade in the U.S.A.

TECHNIQUE:

For the best results:

Make sure the call is appropriately conditioned with the included scouring pad.
Hold the call away from your body; cup it between your index finger and thumb.
Hold the striker like a pencil at a 70-degree angle to call; rest your other fingers solidly against the call.
Apply light pressure from the striker when calling.

For the most consistent pitches and tone use the upper third of the call. The center of the call produces deeper tones.

Cackle: Move striker in straight quick ¼" lines 7 to 10 times.
Cluck: Move striker very quickly in straight ¼" lines using popping motion.
Cut: Move striker very quickly in straight ¼" lines with broken rhythm (ex. 3 notes 2 notes 4 notes).
Purr: Slowly slide striker in a straight 1" line across surface. Hold striker higher for more consistent sound. Use scouring pad to create additional friction as needed.
Yelp: Move striker in a short oval or circular motion in ½" lines producing a two-tone yelp 5 to 7 times in each sequence.