YOU MUST BE 18 OR OLDER TO ENTER

Many people who enjoy reloading prefer the Lee Round Nose Pistol Mould – Double Cavity (Handles Included). Because of the construction this mould is made to last. The rust-resistant blocks are made with aluminum that heats up and cools down fast and is extremely lightweight especially when compared to iron or steel blocks so there is not as much fatigue on the bullet caster.

In addition this particular mould has specially crimped block halves which helps in producing perfectly round and correct sized bullets even after just a few casts.

Available in a variety of grains including 90 140 158 195 214 and 240 among others the Lee Semi-Wadcutter Pistol Mould – Double Cavity (Handles Included) is exceptional for reloading. The blocks are aluminum with steel handles that are permanently attached including strong grips.

In addition being made from aluminum this mould will not rust its light weight reduces risk of fatigue on the bullet caster and it can heat up and cool down quicker than blocks made from steel and iron. Although softer than blued steel if handled gently the mould will provide years of service.

Available in a variety of grains including 90 140 158 195 214 and 240 among others the Lee Semi-Wadcutter Pistol Mould – Double Cavity (Handles Included) is exceptional for reloading. The blocks are aluminum with steel handles that are permanently attached including strong grips.

In addition being made from aluminum this mould will not rust its light weight reduces risk of fatigue on the bullet caster and it can heat up and cool down quicker than blocks made from steel and iron. Although softer than blued steel if handled gently the mould will provide years of service.

Available in a variety of grains including 90 140 158 195 214 and 240 among others the Lee Semi-Wadcutter Pistol Mould – Double Cavity (Handles Included) is exceptional for reloading. The blocks are aluminum with steel handles that are permanently attached including strong grips.

In addition being made from aluminum this mould will not rust its light weight reduces risk of fatigue on the bullet caster and it can heat up and cool down quicker than blocks made from steel and iron. Although softer than blued steel if handled gently the mould will provide years of service.

Many people who enjoy reloading prefer the Lee Round Nose Pistol Mould – Double Cavity (Handles Included). Because of the construction this mould is made to last. The rust-resistant blocks are made with aluminum that heats up and cools down fast and is extremely lightweight especially when compared to iron or steel blocks so there is not as much fatigue on the bullet caster.

In addition this particular mould has specially crimped block halves which helps in producing perfectly round and correct sized bullets even after just a few casts.

Available in a variety of grains including 90 140 158 195 214 and 240 among others the Lee Semi-Wadcutter Pistol Mould – Double Cavity (Handles Included) is exceptional for reloading. The blocks are aluminum with steel handles that are permanently attached including strong grips.

In addition being made from aluminum this mould will not rust its light weight reduces risk of fatigue on the bullet caster and it can heat up and cool down quicker than blocks made from steel and iron. Although softer than blued steel if handled gently the mould will provide years of service.

Available in a variety of grains including 90 140 158 195 214 and 240 among others the Lee Semi-Wadcutter Pistol Mould – Double Cavity (Handles Included) is exceptional for reloading. The blocks are aluminum with steel handles that are permanently attached including strong grips.

In addition being made from aluminum this mould will not rust its light weight reduces risk of fatigue on the bullet caster and it can heat up and cool down quicker than blocks made from steel and iron. Although softer than blued steel if handled gently the mould will provide years of service.

Available in a variety of grains including 90 140 158 195 214 and 240 among others the Lee Semi-Wadcutter Pistol Mould – Double Cavity (Handles Included) is exceptional for reloading. The blocks are aluminum with steel handles that are permanently attached including strong grips.

In addition being made from aluminum this mould will not rust its light weight reduces risk of fatigue on the bullet caster and it can heat up and cool down quicker than blocks made from steel and iron. Although softer than blued steel if handled gently the mould will provide years of service.

Available in a variety of grains including 90 140 158 195 214 and 240 among others the Lee Semi-Wadcutter Pistol Mould – Double Cavity (Handles Included) is exceptional for reloading. The blocks are aluminum with steel handles that are permanently attached including strong grips.

In addition being made from aluminum this mould will not rust its light weight reduces risk of fatigue on the bullet caster and it can heat up and cool down quicker than blocks made from steel and iron. Although softer than blued steel if handled gently the mould will provide years of service.

Available in a variety of grains including 90 140 158 195 214 and 240 among others the Lee Semi-Wadcutter Pistol Mould – Double Cavity (Handles Included) is exceptional for reloading. The blocks are aluminum with steel handles that are permanently attached including strong grips.

In addition being made from aluminum this mould will not rust its light weight reduces risk of fatigue on the bullet caster and it can heat up and cool down quicker than blocks made from steel and iron. Although softer than blued steel if handled gently the mould will provide years of service.

Available in a variety of grains including 90 140 158 195 214 and 240 among others the Lee Semi-Wadcutter Pistol Mould – Double Cavity (Handles Included) is exceptional for reloading. The blocks are aluminum with steel handles that are permanently attached including strong grips.

In addition being made from aluminum this mould will not rust its light weight reduces risk of fatigue on the bullet caster and it can heat up and cool down quicker than blocks made from steel and iron. Although softer than blued steel if handled gently the mould will provide years of service.

Available in a variety of grains including 90 140 158 195 214 and 240 among others the Lee Semi-Wadcutter Pistol Mould – Double Cavity (Handles Included) is exceptional for reloading. The blocks are aluminum with steel handles that are permanently attached including strong grips.

In addition being made from aluminum this mould will not rust its light weight reduces risk of fatigue on the bullet caster and it can heat up and cool down quicker than blocks made from steel and iron. Although softer than blued steel if handled gently the mould will provide years of service.

Available in a variety of grains including 90 140 158 195 214 and 240 among others the Lee Semi-Wadcutter Pistol Mould – Double Cavity (Handles Included) is exceptional for reloading. The blocks are aluminum with steel handles that are permanently attached including strong grips.

In addition being made from aluminum this mould will not rust its light weight reduces risk of fatigue on the bullet caster and it can heat up and cool down quicker than blocks made from steel and iron. Although softer than blued steel if handled gently the mould will provide years of service.

Available in a variety of grains including 90 140 158 195 214 and 240 among others the Lee Semi-Wadcutter Pistol Mould – Double Cavity (Handles Included) is exceptional for reloading. The blocks are aluminum with steel handles that are permanently attached including strong grips.

In addition being made from aluminum this mould will not rust its light weight reduces risk of fatigue on the bullet caster and it can heat up and cool down quicker than blocks made from steel and iron. Although softer than blued steel if handled gently the mould will provide years of service.

Available in a variety of grains including 90 140 158 195 214 and 240 among others the Lee Semi-Wadcutter Pistol Mould – Double Cavity (Handles Included) is exceptional for reloading. The blocks are aluminum with steel handles that are permanently attached including strong grips.

In addition being made from aluminum this mould will not rust its light weight reduces risk of fatigue on the bullet caster and it can heat up and cool down quicker than blocks made from steel and iron. Although softer than blued steel if handled gently the mould will provide years of service.

Available in a variety of grains including 90 140 158 195 214 and 240 among others the Lee Semi-Wadcutter Pistol Mould – Double Cavity (Handles Included) is exceptional for reloading. The blocks are aluminum with steel handles that are permanently attached including strong grips.

In addition being made from aluminum this mould will not rust its light weight reduces risk of fatigue on the bullet caster and it can heat up and cool down quicker than blocks made from steel and iron. Although softer than blued steel if handled gently the mould will provide years of service.

For reloading and casting in high volumes the Lee Semi-Wadcutter Pistol Mould (Handles Sold Separately) – 6 Cavity is a popular option. As with other Lee moulds this one is constructed from aluminum. Although softer than blued steel aluminum offers impressive benefits.

Aluminum is light so there is not as much risk for fatigue on the bullet caster it can heat up and cool down fast and it is rust resistant. In addition the block halves for this mould are CNC machined which means they produce more perfect bullets. This mould also boasts a hard anodized sprue plate with cam control.

For reloading and casting in high volumes the Lee Semi-Wadcutter Pistol Mould (Handles Sold Separately) – 6 Cavity is a popular option. As with other Lee moulds this one is constructed from aluminum. Although softer than blued steel aluminum offers impressive benefits.

Aluminum is light so there is not as much risk for fatigue on the bullet caster it can heat up and cool down fast and it is rust resistant. In addition the block halves for this mould are CNC machined which means they produce more perfect bullets. This mould also boasts a hard anodized sprue plate with cam control.

For reloading and casting in high volumes the Lee Semi-Wadcutter Pistol Mould (Handles Sold Separately) – 6 Cavity is a popular option. As with other Lee moulds this one is constructed from aluminum. Although softer than blued steel aluminum offers impressive benefits.

Aluminum is light so there is not as much risk for fatigue on the bullet caster it can heat up and cool down fast and it is rust resistant. In addition the block halves for this mould are CNC machined which means they produce more perfect bullets. This mould also boasts a hard anodized sprue plate with cam control.

For reloading and casting in high volumes the Lee Semi-Wadcutter Pistol Mould (Handles Sold Separately) – 6 Cavity is a popular option. As with other Lee moulds this one is constructed from aluminum. Although softer than blued steel aluminum offers impressive benefits.

Aluminum is light so there is not as much risk for fatigue on the bullet caster it can heat up and cool down fast and it is rust resistant. In addition the block halves for this mould are CNC machined which means they produce more perfect bullets. This mould also boasts a hard anodized sprue plate with cam control.

For reloading and casting in high volumes the Lee Semi-Wadcutter Pistol Mould (Handles Sold Separately) – 6 Cavity is a popular option. As with other Lee moulds this one is constructed from aluminum. Although softer than blued steel aluminum offers impressive benefits.

Aluminum is light so there is not as much risk for fatigue on the bullet caster it can heat up and cool down fast and it is rust resistant. In addition the block halves for this mould are CNC machined which means they produce more perfect bullets. This mould also boasts a hard anodized sprue plate with cam control.

For someone who enjoys reloading and wants high quality the Lee Shotgun Slug Mould (Includes Handles) is hard to beat. Because of its affordability this mould saves money over buying ammunition. Aluminum is used by Lee to create mould blocks making them rust resistant. Aluminum also heats up and cools down fast especially when compared to iron and steel moulds.

In addition aluminum is a light material so the risk of fatigue on the bullet caster is less. Lee CNC machines the block halves in an effort to produce rounder and more correct sized bullets even in just a few casts.

Lee 7/8oz Slug Mold features the exclusive drive key which positively rotates the slug in rifled shotgun barrels. Includes sprue plate handles and instruction with suggested loads. 7/8 OZ diameter = .681 inches length= .545 inches

FEATURES
–Six Cavity Mold
-.358 Diameter
-140 grain
-Semi Wad Cutter nose bullet
-Suitable for cartridges like .38 Special, .38 Smith & Wesson, .38 Colt New Police, .357 Magnum
-Lube & handles sold separately

FEATURES
–Six Cavity Mold
-.452 Diameter
-230 grain
-Truncated Cone nose bullet
-Suitable for cartridges like .45 ACP, .45 Colt, etc.
-Lube & handles sold separately