the Lee Pro 6000 Kit .44 Special .44 Magnum includes six pack progressive press Auto drum powder measure shell plate universal case feed magazine and Lee breech lock dies (full length sizing die short charging die easy adjust dead length bullet seating die factory crimp die and instructions with load data).
- Six Pack Progressive Press
- Auto Drum Powder Measure
- .44 Special .44 Magnum Six Pack Shell Plate
- Universal Case Feed Magazine
- .44 Special .44 Magnum Lee Breech Lock Dies
The .44 Special .44 Magnum Lee Breech Lock Die Sets Include :
- Factory installed color coded spline drive breech lock quick change bushings
- Full Length Sizing Die
- Short Charging Die
- Easy Adjust Dead Length Bullet Seating Die
- Factory Crimp Die
- Powder Dipper
- Instructions with Load Data
Fastest and easiest way to lubricate and size cast bullets. Standard 7/8×14 threads fit any reload-ing press. Bullets are pushed through the sizing die nose first so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container.
Fastest and easiest way to lubricate and size cast bullets. Standard 7/8×14 threads fit any reload-ing press. Bullets are pushed through the sizing die nose first so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container.
Fastest and easiest way to lubricate and size cast bullets. Standard 7/8×14 threads fit any reload-ing press. Bullets are pushed through the sizing die nose first so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container.
Fastest and easiest way to size cast bullets. Standard 7/8×14 threads fit any reloading press. Bullets are pushed through the sizing die nose first so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Lee lube sold separately.
Fastest and easiest way to size cast bullets. Standard 7/8×14 threads fit any reloading press. Bullets are pushed through the sizing die nose first so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Lee lube sold separately.
Fastest and easiest way to lubricate and size cast bullets. Standard 7/8×14 threads fit any reload-ing press. Bullets are pushed through the sizing die nose first so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container.
Fastest and easiest way to lubricate and size cast bullets. Standard 7/8×14 threads fit any reload-ing press. Bullets are pushed through the sizing die nose first so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container.
Fastest and easiest way to lubricate and size cast bullets. Standard 7/8×14 threads fit any reload-ing press. Bullets are pushed through the sizing die nose first so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container.
Fastest and easiest way to lubricate and size cast bullets. Standard 7/8×14 threads fit any reload-ing press. Bullets are pushed through the sizing die nose first so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container.
Fastest and easiest way to size cast bullets. Standard 7/8×14 threads fit any reloading press. Bullets are pushed through the sizing die nose first so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Lee lube sold separately.
Optional gatling style magazine to pre-load your bullets small and medium hold over 100 bullets. Small Inline Bullet Feed Magazine works with bullet diameters .220 to .273. 22 CAL 24 CAL and 26 CAL.
Lee Smart Lock Breech Lock Bushings 4 pack. New easy grip splined drive surface allows easy accurate and fast die installation in your press. No need for lock rings on your dies with these quick-change bushings. Internal o-ring maintains perfect adjustment. Once set you’ll never lose position.
For even easier installation Lee offers a handy lock ring wrench.
The Lee Steel 3-Die Set includes all of your favorite features that can be found in Lee Premium Carbide 3-Die sets but these dies require the use of case lubricant. These sets come in a variety of different sizes to accommodate all of the most popular case calibers.
If you are looking for a moderately priced set of steel dies look no further than the Lee Steel 3-Die Set.
Includes Full Length Sizing Die Bullet Seating Die and Powder Through Expanding Die Universal Shell Holder Powder Dipper and Instructions/Load Data.
Manufactured in various diameters the Lee Truncated Cone Pistol Mould (Handles Included) – Double Cavity is excellent for reloading and casting. The aluminum construction of this and other Lee moulds is ideal because they have the ability to heat up and cool down fast are rust resistant and being so light fatigue on the caster bullet is reduced.
The crimped block halves help produce the roundest bullets and offer the best size control possible. In addition the tangential cutoff is great for eliminating the nip at the cutoff on the sprue plate.
Manufactured in various diameters the Lee Truncated Cone Pistol Mould (Handles Included) – Double Cavity is excellent for reloading and casting. The aluminum construction of this and other Lee moulds is ideal because they have the ability to heat up and cool down fast are rust resistant and being so light fatigue on the caster bullet is reduced.
The crimped block halves help produce the roundest bullets and offer the best size control possible. In addition the tangential cutoff is great for eliminating the nip at the cutoff on the sprue plate.
Manufactured in various diameters the Lee Truncated Cone Pistol Mould (Handles Included) – Double Cavity is excellent for reloading and casting. The aluminum construction of this and other Lee moulds is ideal because they have the ability to heat up and cool down fast are rust resistant and being so light fatigue on the caster bullet is reduced.
The crimped block halves help produce the roundest bullets and offer the best size control possible. In addition the tangential cutoff is great for eliminating the nip at the cutoff on the sprue plate.
For higher-volume reloading and casting many people prefer the Lee Truncated Cone Pistol Mould (Handles/Lube Sold Separately) – 6 Cavity. This mould works great for ammunition for a 9mm Ruger .45 Colt and other pistols and also comes in a variety of diameters.
The aluminum construction is one of the top selling points because it is a lightweight material that reduces fatigue on the bullet caster it heats and cools a lot faster than iron or steel moulds do and it resists rust. This mould also ensures round bullets of correct size because of the crimped block halves.
Lee started with custom extrusion of high strength aluminum with a splined exterior surface. They split the ring and added a cross bolt that when even lightly tightened applies a vice like grip on your dies. No tiny set screws that easily strip or damage your die threads.
Then added the famous Lee “O” ring because no matter how securely you have the lock ring clamped to the die it will loosen in the press during operation without the friction of the “O” ring. The “O” ring allows you to finger tighten into your press and it will never loosen during operation yet you can easily remove your die with finger pressure.
Also included is a handy slim profile lock ring wrench works great when fitting dies on a turret or tool head. Dies are simply easier to install with the lock ring wrench.
- Compatible with 7/8 x 14 threaded Lee reloading dies and Lee reloading presses
- Torque type splined exterior for a no-slip grip
- "O" ring anti-rotation included. Never loosens during use
- Lock-ring wrench included
Lee ultimate spline drive lock rings. 4 pack of red white blue and gold anodized aluminum lock-rings with O-rings.
One of the best split-lock ring ever made. Dies are simply easier to install with the lock ring wrench.
- Compatible with 7/8 x 14 threaded Lee reloading dies and Lee reloading presses.
- Torque type splined exterior for a no-slip grip.
- "O" ring anti-rotation included. Never loosens during use.
Because carbide is so hard no lubrication is required on the case. You find the die will actually burnish the case and improve its appearance. The die will last a lifetime.
Because carbide is so hard no lubrication is required on the case. You find the die will actually burnish the case and improve its appearance. The die will last a lifetime.
The Lee Universal Case Expanding Die is a must-have tool for serious reloaders because it works on all caliber sizes ranging from the .22 Hornet to the biggest Ultra Mag case. At such a low price point not to mention the benefits you receive you can
Lee 6.8 Western PaceSetter 3-Die Set includes a Full Length Sizing Die Easy Adjust Dead Length Bullet Seating Die Factory Crimp Die Universal Shell Holder and Instructions. Please note there is no load data available for this cartridge a dipper is not included.