The Large Brake Adapter will allow the V3 Chronograph to be used with muzzle brakes up to 7.7" in length and barrel diameters up to 1.6" at the muzzle.

This product was designed to compensate for the longer muzzle brakes commonly found on large caliber rifles such as the .338 and .50 BMG.

The Large Brake Adapter is a milled 6061 aluminum fixture that uses the included V3 Rail Adapter to clamp onto your weapon's barrel for easy use with your V3 Chronograph's bayonet.

*MagnetoSpeed V3 Chronograph not included

FEATURES:
-Retractable nozzle, locks in position, spring loaded
-Strong neodymium magnet
-Replaceable 50 micron filter
-Chamber seal for efficient air flow
-Metal belt clip on backside

The MagnetoSpeed Sporter chronograph was designed to be used on barrels from 1/2 inch up to 1 inch in diameter. In can also accommodate muzzle brakes and flash hiders up to 2.7 inches in length. Ideal for contoured rifle barrels (sporter barrels) and long-barreled revolvers. (Note: Not compatible with the Large Brake Adapter or the V3 Rail Adapter.)

MagnetoSpeed Sporter features :

• Simple one-button cycling display (shows recent shot velocity and statistics plug in to turn on)
• Battery : 9-Volt (included)
• Easy access battery compartment no need for screwdriver to swap batteries
• Three sensitivity settings for fine-tuning
• Integral quick-attach strapping system; with metal buckle and triad thumb nut
• Proven technology with updated sensor design
• Integral 3.5 foot sensor cord

Kit Includes:

• Display Unit
• Bayonet-style sensor (Bayo)
• Thick and thin rubber V-block spacers
• Heavy duty strap with thumb nut tightener
• Ultra-compact storage container.

Features:
-Three-button menu system
-Battery options: (1) 9-Volt or (2) CR123s
-Easy access battery compartment, no need for screwdriver to swap batteries
-Improved shooting modes, with the ability to now operate with air guns
-Downloadable firmware updates
-Advanced data logging & troubleshooting capabilities
-More compact & rugged display housing
-Rapid mode with rate-of-fire
-Redesigned bayonet
-Rugged strapping system
-Dual data connection points

Kit Includes:
-Display unit
-Retractable connection cable & Standard 6 ft. connection cable
-Stainless steel blast shield
-Thick & thin rubber V-block spacers
-microSD card with adapter
-Bayonet sensor
-Polymer spacer kit with screw hardware & allen wrench
-Heavy duty strap with thumb nut tightener
-Hard case with custom cut foam
-Alignment rod
-Instructions

The XFR adapter and associated smartphone application allows users with Magnetospeed Sporter or V3 displays to download their current (and archived for V3) shot series to their Android or iOS device. Users can store view edit and email multiple series once they have been transferred to their phone. The app can also be used to reconfigure the display settings (units and sensitivity level) and clear the display's current series. Additional features and improvements are on-going. XFR is NOT compatible with V1 or V2 displays. To use the XFR adapter with your V3 unit please make sure your firmware is up to date