Tired of pulling on the handle of your press over and over and over? The Mark 7 Autodrive will fully automate your Dillon 650 or 750 manual presses for speed efficiency and performance. The Autodrive is packed with features that make it the most advanced system ever designed. The patented digital drive system is computer operated allowing you to fully control the speed torque and dwell of the press with a simple to use high definition tablet.
The combination of their patented digital sensor technology torque sensing motor and jam sense technology ensures a safe and trouble free loading experience. If top of the line technology innovative features and high quality are what you are looking for Mark 7 is the only choice.
This is a true “plug and play” system that makes it easy to mount and set-up on your press. The included TorqueSense and JamSense sensors protect the press and system if anything gets out of place. The Autodrive controller can also accept additional sensor options for the ultimate level of protection. Autodrives come with their own rugged base and a drilled and tapped press mounting plate. The high torque motor and precision machined components combine for super smooth operation.
The Mark 7 Powder Check Alarm will sound an audible alarm if a grossly incorrect powder level is detected inside the case. A must-have for people who want full confidence that every round produced has powder. Includes inserts for both pistol and rifle applications.
The new Power Trim Xpress case trimmer will tackle the toughest commercial trimming jobs yet and is priced to fit any reloaders' budget. The trimmer features a powerful variable speed DC motor yet it is also a slim design that takes up minimal room – only one die station on progressive presses unlike other trimmers that take up two or three stations!
The trimmer will speed through standard trim jobs and also easily handle cartridge conversions such as 223 to 300 Blackout.
The Power Trim Xpress accepts standard trim dies and is equipped with a vacuum manifold to cleanly evacuate chips. In addition the trimmer comes with a long-lasting carbide cutter.
Features:
- Electric Press Mounted Case Trimmer
- Slim motor design takes up minimal room
- 1-1/2” vacuum manifold to evacuate chips
- Powerful industrial grade variable speed DC motor
- Replaceable carbide cutter
- Uses standard Trim-Dies
- Trims and case forms 300 Blackout from .223 brass with one stroke!
Tired of pulling on the handle of your press over and over and over? The Apex 10 / Evolution Autodrive will fully automate your Mark 7 APEX 10 or Evolution manual presses for speed efficiency and performance. The Autodrive is packed with features that make it the most advanced system ever designed. The patented digital drive system is computer operated allowing you to fully control the speed torque and dwell of the press with a simple to use high definition tablet.
The combination of their patented digital sensor technology torque sensing motor and jam sense technology ensures a safe and trouble free loading experience. If top of the line technology innovative features and high quality are what you are looking for Mark 7 is the only choice.
This is a true 'plug and play' system that makes it easy to mount and set-up on your press. The included TorqueSense and JamSense sensors protect the press and system if anything gets out of place. The Autodrive controller can also accept additional sensor options for the ultimate level of protection. Autodrives come with their own rugged base and a drilled and tapped press mounting plate. The high torque motor and precision machined components combine for super smooth operation.
Manual Drop Ship
The Mark 7 Reloading Apex 10 manual press operates so smoothly you might think it is an automated press! It features a solid cast 10-station toolhead to enable one-pass loading our all-new Mark 7 Case Feeder a Mechanical Powder Measure our new shuttle-disk priming system ambidextrous operation and so much more.
Manual Drop Ship The Mark 7 Reloading Apex 10 manual press operates so smoothly you might think it is an automated press! It features a solid cast 10-station toolhead to enable one-pass loading our all-new Mark 7 Case Feeder a Mechanical Powder Measure our new shuttle-disk priming system ambidextrous operation and so much more. Please note: If you are adding dies the Apex 10 already includes a Universal Hold Down Die.
Machine will stop instantly when the red button is pressed
- Quality brushed steel look-and-feel
- Comfortable to hold in the hand
- Upon press red button on top will stop machine
- Lightweight
- 6-foot cable included
The Mark 7 Autodrive has so much technology integrated into the system it is Patented. Comes mounted on a 1/2" aluminum billet base plate with their control system mounted on the plate then all the hardware necessary for your machine to run flawlessly. This includes the high horsepower motor gearbox motor mount and supplementary electronics. Included with your purchase is the brilliant 10" control tablet (completely upgradeable as you desire with subsequent versions of our software) as well as a tablet mounting bracket. Everything you need to run your loading press is included – typical installtion time is 20-30 minutes. Sold in over 35 countries around the world.
- AUTOMATES THE DILLON CP2000/RL1100/1050 – Dillon machine is not included.
- Digital clutch – adjustable on-the-fly
- Completely compatible with Mr Bulletfeeder and GSI bulletfeeders
- Digital jog and immediate stop
- Microprocessor controlled
- Includes brilliant metal computer tablet – no control boxes!
- Features monitored by computer
- Downloadable software upgrades – for life !
- Supports a variety of accessories
- User-configurable Dwell time
- Plug-and-play with your unmodified Super 1050 RL1050 CP 2000 1100
- Pre-assembled and shipped ready to you
- CNC grade planetary gearbox
- Maintenance-free timing belt drive
- User selectable speeds of up-to 3500 rounds/hour
- 1.5 HP high torque motor
- Fully Supports International Voltage – this unit operates at 110/220v and at 50/60 Hz with no appreciable variation in speed or performance (Please select voltage at Check Out)
- Completely compatible with the leading bullet feeders on the market
- Machine dimensions are: 41" tall (104 cm) x 16" wide (40.6 cm) x 20" deep (50.8 cm)
The Mark 7 Digital PowderCheck Sensor can automatically stops the machine if a grossly incorrect powder level is detected inside the case. If this happens you will then see a notification on the computer tablet to check the case powder level. A must-have for people that want full confidence that every round produced has powder. Gen 2 Digital Powder Check Sensor comes complete with probes for:
- Small pistol
- Small rifle
- Large pistol
- Large rifle
Compatible with the following Mark 7 Loading Machines & Autodrives :
- Evolution + Autodrive
- Evolution
- RL1100/CP2000/Super1050/1050X Autodrives
- 650 Pro/650 X Autodrives
How it works: The user attaches the probe that corresponds to the case type and size to the sensor rod. Then adjust the sensing probe assembly to the correct height for the desired powder load by moving the sensor die up or down and secure the die. When the press is operating the probe is automatically inserted into the charged case. This moves the sensor bar into its measuring position. If the sensor’s infrared laser beam is able to pass through either the sensor bar’s “over charge” or “under charge” window then the notification is triggered. Sensitivity is dependent on powder type and user adjustment. Works for all our products in the Autodrive line as well as Evolution PRO.
Sometimes you decap and sometimes you don't (decapping is the process in Station #2 that pushes out the old primer). What happens when your decapping pin is broken and you don't realize it ? How about that stubborn spent primer that hangs onto the pin and isn't fully discarded only to be pushed back in by the swage station ? oops.
This is a must-have accessory for the Mark 7 1050 Autodrive. The positive decap sensor uses optical recognition to determine if a spent primer is removed and if no spent primer falls the machine stops after the stroke making easy to remove the impacted case. Save yourself and save your machine. If you are processing or loading new brass simply disable the sensor from the Mark 7 tablet interface. ALSO acts as a brass sensor – when enabled can stop the press when brass is not present in the decapping station.
A critical safety and productivity measure this sensor can dramatically reduce injuries downtime and machine breakage. Ships with the sensor mounting bracket and clear tubing and an e-mail file that will update your machine's software. If purchased with a new machine this will be installed and tested for you.
If you are installing on an existing Mark 7 1050 Autodrive simply use the existing hardware and hole on your machine and remove the spent primer cup that came with you machine. No more emptying cups. No more overflowing cups. Concentrate on your operations. This is only available for users of the Mark 7 1050 Autodrive.
Sometimes you decap and sometimes you don't (decapping is the process in Station #2 that pushes out the old primer). What happens when your decapping pin is broken and you don't realize it ? How about that stubborn spent primer that hangs onto the pin and isn't fully discarded only to be pushed back in by the swage station ? oops.
This is a must-have accessory for the Mark 7 650 Autodrive. The positive decap sensor uses optical recognition to determine if a spent primer is removed and if no spent primer falls the machine stops after the stroke making easy to remove the impacted case. Save yourself and save your machine. If you are processing or loading new brass simply disable the sensor from the Mark 7 tablet interface. ALSO acts as a brass sensor – when enabled can stop the press when brass is not present in the decapping station.
A critical safety and productivity measure this sensor can dramatically reduce injuries downtime and machine breakage. Ships with the sensor mounting bracket and clear tubing and an e-mail file that will update your machine's software. If purchased with a new machine this will be installed and tested for you.
If you are installing on an existing Mark 7 650 Autodrive simply use the existing hardware and hole on your machine and remove the spent primer cup that came with you machine. No more emptying cups. No more overflowing cups. Concentrate on your operations. This is only available for users of the Mark 7 650 Autodrive.
When using a press mounted powder measure there is no need to have a separate powder measure mounted to your bench saving space and time.
- Superior engineering means our powder measure is fully loaded with features.
- Accuracy within +/- 1/10 of a grain (±0.1 gr).
- Powder hopper capacity of 5000 grains and integrated powder screen to help keep out any unwanted debris.
- Powder baffle to ensure consistent and repeatable powder drops.
- Case actuated operation with built in compliance to work with varying case lengths.
- The rotating barrel is built using sealed ball bearings and oil impregnated bronze bushings on all sliding surfaces to insure smooth operation and extended life.
- Simple disassembly for cleaning and converting from pistol to rifle and rifle to pistol.