Mesa Tactical’s LEO Gen II Telescoping Stock adapter and pistol grip system for the Remington 870 shotgun is made specifically with law enforcement in mind. The LEO Stock adapter system is designed to allow shooters the ability to fit AR style collapsible stocks and pistol grips onto their shotguns, while allowing use of open or bead sights. The versatile telescoping stock adapter system can be fitted with a standard AR-15 grip and telescoping stock, which enables tactical operators to instantly adjust the length of pull of the telescoping stock in order to accommodate differences in individual body sizes or use of body armor. The LEO adapter is available in three types of kits, adapter kits, recoil starter packs or complete stock kits. Mesa Tactical’s upgraded versions include KynSHOT’s hydraulic recoil buffers which replace the standard receiver extension tube normally used with AR-15 style telescoping stock assemblies. The recoil buffer is manufactured for Mesa Tactical by Kyntec. The KynSHOT hydraulic buffers (Mil-spec) are a recoil reducer designed for professional operators who require optimum accuracy and control. The KynSHOT hydraulic recoil buffers reduce felt recoil from 70% up to 90%.

Use Mesa Tactical’s collapsible stock kits and adapters to install AR-15 adjustable buttstocks and pistol grips onto the venerable Mossberg 500 shotgun platforms for the ultimate in tactical shotgun configuration performance. The concept behind the telescoping stock system is simple: the shotgun stock is replaced by an adapter, which attaches to the rear end of the shotgun’s receiver and it, in turn, mimics the rear end of an AR-15 lower receiver, into which an AR-15 receiver extension tube can be threaded. The AR-15 telescoping stock and pistol grip can then be reliably attached.

The Reflex Sight Mount for the Beretta 1301 tactical shotgun is intended to cowitness with the shotgun factory ghost ring sights, a key requirement from multiple police agencies.

SureShell Aluminum Shotshell Carriers with Rail are machined from 6061-T6 aluminum and use Mesa Tactical’s innovative rubber friction retention system to firmly and reliable hold shells in place until needed.

The line of SureShell shotshell carriers with integrated Trijicon RMR reflex sight mounts for the Benelli M2/M4 and Beretta 1301 shotguns, are similar to Mesa’s SureShell carriers with integrated optics rail for those platforms, instead of a Picatinny rail these carriers feature a precision machined mount for an RMR reflex sight (NOT INCLUDED). When installed on the shotgun, the RMR sight co-witnesses with factory ghost ring sights.

This SureShell Polymer Carrier system features shell holders injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. The SureShell Polymer Carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. The saddle rail feature Picatinny rails machined from aircraft grade 6061-T6 aluminum, which are mil-spec hard anodized and provide an extremely durable non-glare matte finish. The saddle rail design provides a robust mounting platform suitable for mounting a variety of optical sights and also includes a six shell SureShell polymer shotshell carrier mounted on the left side of the receiver. Manufactured in compliance with MIL-STD-1913 Picatinny specifications, and no gunsmithing is required for installation.

SureShell carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard coat anodized for a rugged non-glare finish.

The line of SureShell shotshell carriers with integrated Trijicon RMR reflex sight mounts for the Beretta 1301 shotguns, are similar to Mesa’s SureShell carriers with integrated optics rail for those platforms, instead of a Picatinny rail these carriers feature a precision machined mount for an RMR reflex sight (NOT INCLUDED). When installed on the shotgun, the RMR sight co-witnesses with factory ghost ring sights.

SureShell shotshell carriers for the Beretta 1301 feature mounting brackets with integral top Picatinny sight rails. Using the top mounting screw holes found on the Beretta 1301 shotguns, the SureShell shotshell carriers are thus slung on the left side of the receiver, securely fastened at the top. No other shell carrier mounting method is as secure or looks as good. The Picatinny rails are machined from aircraft grade 6061-T6 aluminum, which are mil-spec hard anodized and provide an extremely durable non-glare matte finish. The basic saddle rail design provides a robust mounting platform suitable for mounting a variety of optical sights, while a second version, which is nearly identical to the basic version, also includes a Mesa Tactical four, six, or eight shell SureShell shotshell carrier mounted on the left side of the receiver. Both versions are manufactured in compliance with MIL-STD-1913 Picatinny specifications, and no gunsmithing is required for installation.

These SureShell shotshell carriers for the Beretta 1301 feature mounting brackets with integral top Picatinny sight rails. Using the top mounting screw holes found on the Beretta 1301 shotguns. The SureShell shotshell carriers are thus slung on the left side of the receiver, securely fastened at the top. No other shell carrier mounting method is as secure or looks as good.

Meeting the urgent requirement for an easy way to mount weapon lights and other accessories on the Benelli M4 semi-automatic shotgun, the Truckee replacement forend provides industry standard M-LOK mounting points on sides and bottom. Machined from 6061 heat treated aluminum, the Truckee forend is sleek, rugged and lightweight. M-LOK slots accept Picatinny rail sections or specialized light mounts or vertical grips. Requires the removal of the Benelli M4 shotgun’s factory front sling loop.

Meeting the urgent requirement for an easy way to mount weapon lights and other accessories on the Beretta 1301 semi-automatic shotgun, the Truckee replacement forend provides industry standard M-LOK mounting points on sides and bottom.

Developed to meet the needs of law enforcement and military operators, the rugged Urbino Tactical stock features a ,tactical, 121/2 inch length of pull (LoP), Santoprene rubber grip, Limbsaver buttpad and a variety of flexible sling mounting options. A shorter stock is necessary for use in tactical applications, especially with body armor. The Urbino Tactical stock is durable, easy to shoulder and will not slip. The Urbino Tactical stock is also comfortable, thus reducing operator fatigue, especially during prolonged training and qualification sessions. The Santoprene grip is padded at the rear to reduce recoil impact against the web of the operator’s hand and the Limbsaver buttpad substantially reduces felt recoil. All Urbino Tactical stocks are made in the USA, and include Benelli style rear sling loops for 11/4 inch sling webbing. In addition, a hole at the lower rear of the stock accepts QD style sling swivels (not included). Urbino Tactical stocks can also be fitted with any of a variety of optional steel pocket sling mounts similar to those offered for Remington telescoping stock adapters. Pocket sling loops, hook loops and push-button sling swivel mounts that fit securely between the Urbino stock and the shotgun receiver.

Developed to meet the needs of law enforcement and military operators, the rugged Urbino Tactical stock features a ,tactical, 121/2 inch length of pull (LoP), Santoprene rubber grip and a variety of flexible sling mounting options. A shorter stock is necessary for use in tactical applications, especially with body armor. The Urbino Tactical stock is durable, easy to shoulder and will not slip. The Urbino Tactical stock is also comfortable, thus reducing operator fatigue, especially during prolonged training and qualification sessions. The Santoprene grip is padded at the rear to reduce recoil impact against the web of the operator’s hand. All Urbino Tactical stocks are made in the USA, and include Benelli style rear sling loops for 11/4 inch sling webbing. In addition, a hole at the lower rear of the stock accepts QD style sling swivels (not included). Urbino Tactical stocks can also be fitted with any of a variety of optional steel pocket sling mounts similar to those offered for Remington telescoping stock adapters. Pocket sling loops, hook loops and push-button sling swivel mounts that fit securely between the Urbino stock and the shotgun receiver.

Developed to meet the needs of law enforcement and military operators, the rugged Urbino Tactical stock features a ,tactical, 121/2 inch length of pull (LoP), Santoprene rubber grip, Limbsaver and a variety of flexible sling mounting options. A shorter stock is necessary for use in tactical applications, especially with body armor. The Urbino Tactical stock is durable, easy to shoulder and will not slip. The Urbino Tactical stock is also comfortable, thus reducing operator fatigue, especially during prolonged training and qualification sessions. The Santoprene grip is padded at the rear to reduce recoil impact against the web of the operator’s hand and the Limbsaver buttpad substantially reduces felt recoil. All Urbino Tactical stocks are made in the USA, and include Benelli style rear sling loops for 11/4 inch sling webbing. In addition, a hole at the lower rear of the stock accepts QD style sling swivels (not included). Urbino Tactical stocks can also be fitted with any of a variety of optional steel pocket sling mounts similar to those offered for Remington telescoping stock adapters. Pocket sling loops, hook loops and push-button sling swivel mounts that fit securely between the Urbino stock and the shotgun receiver.

YOU MUST BE 18 OR OLDER TO ENTER