The React Full-size Grip (REG) is a full-fist sized textured vertical grip with finger swells designed to provide a positive grip surface with wet gloved or large hands. This grip allows the support hand to apply rearward pressure to keep the weapon shouldered to enhance muzzle control and accuracy. This is the grip you want if your objective is maximum grip and control.
The React Folding Grip (RFG) is a compact textured vertical grip designed to deploy in either a vertical or horizontal position and provides a positive grip surface with wet or gloved hands. This grip allows the support hand to apply rearward pressure keeping the weapon shouldered yielding better muzzle control and accuracy. This is the grip you want if your objective is low viz operations easy storage and/or use of a bipod without interference.
The React Magwell Grip (RMG) is a compact textured vertical grip designed for close hand hold application at the low ready or CQB situations. Designed to provide a positive grip surface with wet or gloved hands. Locates support hand forward of the magazine well to prevent injury should an overcharged round cause the ejection of the magazine. This grip also incorporates right and left handed pressure pad wells for wired switches and a spare battery storage compartment. This grip allows the support hand to apply rearward pressure keeping the weapon shouldered yielding better muzzle control and accuracy. This is the grip you want if your objective is a close hold grip with added safety.
The React Short Grip (RSG) is a compact textured vertical grip designed to minimize material and dimension while maximizing functionality designed to provide a positive grip surface with wet or gloved hands. This grip allows the support hand to apply rearward pressure keeping the weapon shouldered yielding better muzzle control and accuracy. This is the grip you want if your objective is light weight simplicity.
The React Torch Grip (RTG) is a combination compact textured vertical grip and illumination mount. Designed to minimize material and dimension and utilize the use of a .75 .825 or 1″ diameter flashlight/laser. Designed to provide a positive grip surface with wet or gloved hands and allow the support hand to apply rearward pressure keeping the weapon shouldered yielding better muzzle control and accuracy. This is the grip you want if your objective is a vertical grip that will mount a large variety of flashlights/lasers.
The Mission First Tactical Rifle Magazine 10-round 5.56 NATO magazine engineered as an enhancement of the standard STANAG design. A flared floor plate aids in extraction and handling. The floor plate provides drop protection has a paint pen dot matrix area for easy identification marking. Two fully functional drain holes ensure full and proper draining. Simple toolless disassembly with double floor plate safety release tabs allows user to safely release spring tension during disassembly and quick ammo dumps. Long-life stainless steel spring and four-way anti-tilt follower ensure reliable feeding.Oversized bolt catch notch in the rear of the magazine provides enhanced reliability of the bolt catch operation. Tool-less disassembly with double floor plate safety release tabs.
- MFT stipple texture
- Low profile front ribs front texture
- Flared floor plate
- Paint pen dot matrix on floor plate
- Drain holes
- Long-life stainless steel spring
- Four-way anti-tilt follower
- Oversized mag catch
- Weight:4.8oz
- Height: 8.79"
- Width: 1.125"
- Length: 2.25"
The Tekko Metal AR Carbine Integrated Rail System replaces the plastic factory handguard in minutes and requires no gunsmithing. No permanent alterations need to be made to the rifle its a drop in screwless installation the unit is held in place by the Delta ring and handgaurd cap. Four MIL-STD 1913 Picatinny Rails provide a secure platform for mounting Picatinny accessories such as vertical grips lights lasers bipods and other rail mounted kit. A monolithic style continuous top rail eliminates the gap between the receiver and rail. The 7″ lightweight 6061 aluminum construction is hard coat anodized made in the USA with a Lifetime Warranty.
TMARCIRS Features and Functions:
- No Gunsmithing drop in screwless installation held in place by Delta ring and handguard cap with no permanent alterations to rifle
- 4 MIL-STD 1913 Picatinny Rails provide a secure platform for mounting Picatinny accessories
- Monolithic style continuous top rail
- Lightweight 6061 aluminum construction is hard coat anodized
- 7″ carbine handguard replacement
The Tekko Metal AR Carbine MLOK Rail System replaces the carbine 7? plastic factory handguard in minutes and requires no gunsmithing or special installation tools. Drop in screwless installation means no permanent alterations need be made to the rifle. The unit is held in place by the Delta ring and handguard cap. MLOK attachment system provides secure mounting for MIL-STD 1913 Picatinny rail attachments and accessories such as vertical grips lights lasers bipods and other rail mounted kit. MLOK? system allows for universal modularity between numerous manufacturers of accessories and accessory rails. 7? lightweight 6061 aluminum construction is Type 3 hard coat anodized made in the USA with a Lifetime Warranty.
TMARCMRS Features and Functions:
- No Gunsmithing
- Drop in screwless installation
- Secure platform for mounting Picatinny rails and accessories
- Lightweight 6061 aluminum construction is Type 3 hard coat anodized
- Carbine handguard replacement (7?)
The Tekko Metal AR Carbine Integrated Rail System is a drop in screw less installation, the unit is held in place by the Delta ring and handgaurd cap. The four MIL-STD 1913 Picatinny Rails provide a secure platform for mounting. A monolithic style continuous top rail eliminates the gap between the receiver and rail. The lightweight aluminum construction is a hard coat anodized.
The Tekko Metal AR Carbine KeyMod Rail System replaces the carbine 7″ plastic factory handguard in minutes and requires no gunsmithing or special installation tools. Drop in, screwless, installation means no permanent alterations need be made to the rifle. The unit is held in place by the Delta ring and handguard cap. KeyMod attachment system provides secure mounting for MIL-STD 1913 Picatinny rail attachments and accessories such as vertical grips, lights, lasers, bipods and other rail mounted kit.
The Torch Standard Mount (TSM) accepts a 3/4 .825 or 1" illumination device. Two large purchase pads allow for tool free quick mounting or reconfiguration on a picatinny rail. This is the illumination mount you want if your objective is versatility for use with multi size lights ease of movementspeed of reconfiguration and the lowest profile possible.
Designed to go wherever you go! The MFT Ultralite Belly Band Holster is great for walking jogging hiking biking and around town… no belt needed! Comfortable all-day carry is achieved with 3D Spacer Mesh Fabric – Special channels allow for more efficient airflow increasing comfort (in comparison with elastic bands). An Open-Air Weave Construction design provides holes for air/moisture to pass through naturally hindering bacterial growth. Maximum breathability keeps you cool and dry! Soft Medical Grade Hook & Loop construction ensure no chaffing.
A Hard Laminate Trigger Shield protects the firearm's trigger from unwanted intrusion.
Ambidextrous compatible with a wide variety of firearms.
A self-laminated fastening end is cut/trimmed with scissors for a custom fit. No need for melting binding or stitching to prevent it from fraying.
Fits waist sizes from 26” to 52”
CARE INSTRUCTIONS: HAND OR MACHINE WASHABLE GENTLE CYCLE LAY FLAT TO DRY.
Fitting Instruction: Place on body snuggly. Locate pinch and cut to remove excess material. Trim self-laminated fastening end with scissors. No need for melting binding or stitching to prevent it from fraying.
The Back Up Polymer Flip Up Rear Sight with Windage Adjustment (BUPSWR) mounts onto a 1913 Picatinny rail. A flat head screw driver is required to adjust an Infinite MOA. Unlike other backup sights MFT has developed a shroud that shelters the aperture from debris and impact damage when not deployed. A slim profile allows the sight to sit under all current magnifiers and optics. Manufactured using a specially developed Military Grade reinforced super tough polyamide MADE IN THE USA.