YOU MUST BE 18 OR OLDER TO ENTER

.223 CARTRIDGE RED LASER BORE SIGHTER

.308 CARTRIDGE RED LASER BORE SIGHTER

7.62x39MM CARTRIDGE RED LASER BORE SIGHTER

AR15 FLIP UP REAR SIGHT

KEYMOD RAIL SYSTEM/CARBINE

M-LOK HANDGUARD/CARBINE

Features:

• Strobe feature! Strobe Flashlight feature will disorientate your target and extend battery life.
• Quick Release Mount that will fit most Weaver/ Picatinny type rails. This model will fit Weaver/Picatinny type rails found on most mid size and compact semi-automatic pistols (not Sub-Compact and Pocket pistols).
• Push Button Rubber Switch on the left side of flashlight and a Push Button Rubber Strobe Button on the right side of the flashlight.
• 3 Watt Bright CREE LED
• 150 Lumens Peak Output
• Uses 1 CR2 Lithium Type Battery (Included) [Smaller/Shorter Battery than the CR123A]
• Length: 2.4"
• Weight: 2.6 oz. (with Battery)
• NOTE: NcSTAR has always made a practice of providing the best products at the best prices. Due to technology advances we have upgraded all of our flashlights to higher lumen values as stated on our website. Until old packaging and instructions sheets are depleted and updated you may receive packaging or instructions stating the old lumens but rest assured that all of the NcSTAR flashlights will have the lumens stated on the website.
• International orders will not include batteries.

Features:

• LED (Light Emitting Diode) 100% Safe for the Eyes
• Unlimited Eye Relief for flexible mounting
• Rheostat Knob with Three Brightness Levels for each of the Red Green and Blue Dot reticles
• Includes 30mm Cantilever weaver/ Picatinny type Mount
• Ocular and Objective Flip-Up Lens Covers
• Powered by 3 Volt Lithium Batteries (CR2032) included
• Includes Extra Battery and Mounting Tools
• Black Anodized Aluminum Body
• International orders will not include batteries.

Specifications:

• MAGNIFICATION: 1X
• RETICLE DOT: (RED GREEN and BLUE)
• DOT SIZE: 3 MOA
• OBJECTIVE LENS SIZE: 35mm
• LENS COATING: PLATINUM
• MOUNT TYPE: CANTILEVRED 30mm MOUNT AT 1½” CENTERLINE HEIGHT. RAIL CLAMP ON WITH THUMB NUT. COMPATIBLE WITH WEAVER/ PICATINNY/ MIL-STD 1913 TYPE RAILS
• BATTERY TYPE: CR2032 (included)
• BODY COLOR: BLACK ANODIZED COATED FINISH
• LENGTH: 5.0?
• WEIGHT: 8.9 oz

Features:

• LED (Light Emitting Diode) 100% Safe for the Eyes
• Unlimited Eye Relief for flexible mounting
• Rheostat Knob with Three Brightness Levels for each of the Red Green and Blue Dot reticles
• Includes 30mm Cantilever weaver/ Picatinny type Mount
• Ocular and Objective Flip-Up Lens Covers
• Powered by 3 Volt Lithium Batteries (CR2032) included
• Includes Extra Battery and Mounting Tools
• Black Anodized Aluminum Body
• International orders will not include batteries.

Specifications:

• MAGNIFICATION: 1X
• RETICLE DOT: (RED GREEN and BLUE)
• DOT SIZE: 3 MOA
• OBJECTIVE LENS SIZE: 35mm
• LENS COATING: PLATINUM
• MOUNT TYPE: CANTILEVRED 30mm MOUNT AT 1½” CENTERLINE HEIGHT. RAIL CLAMP ON WITH THUMB NUT. COMPATIBLE WITH WEAVER/ PICATINNY/ MIL-STD 1913 TYPE RAILS
• BATTERY TYPE: CR2032 (included)
• BODY COLOR: BLACK ANODIZED COATED FINISH
• LENGTH: 5.0?
• WEIGHT: 8.9 oz

Features:

• LED (Light Emitting Diode) 100% Safe for the Eyes
• Unlimited Eye Relief for flexible mounting
• Large 40mm Objective lens for a wide field of view
• Adjustable Quick Release Mount fits virtually any weaver/Picatinny type rails
• Integrated Red (Class IIIa) Laser that is fully adjustable for zero
• Powered by 3 Volt Lithium Batteries (CR2032) included
• Includes Extra Battery and Adjustment Tools
• Black Anodized Aluminum Body
• International orders will not include batteries.

• AK-47 Weaver Style Tri-Rail Mount and Receiver Cover
• Replaces existing AK-47 receiver cover. Fits AKM pattern rifles with a stamped receiver (7.62X39 5.54X39 .223)
• The Mount provides Three Rails for mounting and Optic onto the top rail and accessories on the side rails like a Flashlight and/or Laser
• The two side rails can be mounted in several positions for mounting flexability they are also removable
• Adjustable front tab and two rear set screws are provided for a secure fit
• Aluminum (Rail) and Steel Construction (Receiver Cover)
• Length: 9.4"
• Weight: 11.2 oz

45 Degree offset folding front sight perfect for AR15 shooters looking for offset iron sights. Fits onto receiver height Weaver Picatinny MIL-STD 1913 type rails. The A2 front sight post is fully adjustable for elevation. Front sight folds forward flat for a lower profile. Weight: 2.4 oz.

45 Degree offset folding Rear sight perfect for AR15 shooters looking for offset iron sights
Fits onto receiver height Weaver Picatinny MIL-STD 1913 type rails
The A2 Dual Aperature (Large & Small) Rear sight is fully adjustable for windage also with a Large windage knob
Rear sight folds back flat for a lower profile and will fit under the majority of scopes out in the market
Weight: 2.6 oz.

• 30mm AR-15 Scope mount with Quick Release Mount
• Allows you to quickly mount a 30mm or 1″ scope onto your Picatinny Rail
• Front Fixed Cantilever Ring with an adjustable for length Rear Ring Rear Ring is also removable
• Includes 1″ inserts. Mount works with both 30mm and 1″ scopes
• Black Anodized Aluminum Construction
• Length: 4.7″
• Weight: 6.1 oz

• GEN2 AR15 3/4″ Riser raises your Picatinny rail platform by 3/4″. Helps with getting low profile optic mounts to a more comfortable cheek rest height and shooting position.
• GEN2 model has a new updated shape next generation Locking Quick Release mount with shorter lever and is lighter than the previous version.
• Mounts via a Locking Quick Release mount onto your Picatinny rail of your AR15/M4 receiver. You can quickly attach and remove your optic from your receiver and maintain your zero.
• There is a see through channel below the rail to keep the mount lighter and for some firearm types it may allow you to use some factory iron sights.
• Length: 5.3″
• Weight: 4.2 oz

Features:

• AR15 Armorer's Barrel Wrench. Combo tool with plenty of features to work upgrade your AR-15/ M4/ M16
• Barrel Wrench for GI Barrel Nut
• A1 & A2 Flash Suppressor wrenchs
• Older Single Pin and the newer M4 Collapsable Stock Castle Nut wrenchs
• Flat Blade Screw Driver
• 1/2" Drive Ratchet Compatible
• Steel Construction
• Length: 12.7"
• Weight: 20.2 oz
• NcSTAR Patented Design: US Pat. # D598723

Features:

• AR15 Armorer's Barrel Wrench – Generation 2. Combo tool with many New Features/Tools to work and upgrade your AR-15/ M4/ M16
• Barrel Wrench for GI Barrel Nut Free-Float Barrel Nuts with GI spacing DD Barrel Nuts and YHM ( 1¾") Spanner wrench
• A2 (¾") and 5/8 Flash Suppressor wrench M4 Collapsable Stock Castle Nut wrench A2 Buffer Tube Wrench
• Flat Blade Screw Driver for A2 Buttstock Plate 1/2" and 3/8" Drive Compatible Lower Receiver Push Pin Tool
• 1/4" Hex Bit Drive Socket 1911 Barrel Bushing Wrench and a Tactical Bottle Opener
• All the Tools are Clearly Labeled.
• Steel Construction
• Length: 12.9"
• Weight: 13.0 oz
• NcSTAR Patented Design: US Pat. # D703502

Features:

• AR-15 Flip-Up Front Sight – Back-Up Iron Sight
• Designed to be Mounted on Top of Gas Blocks with Picatinny Rails lower than the AR15 Receiver Rail
• Flip-Up A2 Front Sight Post folds down out of view of your optics when not in use
• The A2 front sight post is fully adjustable for elevation
• Aluminum and Steel Construction
• Length: 1.2” (extended) 2.1” (folded)
• Weight: 3.4 oz

• AR15 Tri-Rail Mount/Riser for Flat-Top receivers
• Mounts onto the AR-15 flast-top receiver directly onto the Picatinny rail
• Provides a raised platform for mounting Optics higher for a more comfortable shooting position
• Two Side rails for attaching accessories like a Flashlight & Laser
• Black Anodized Aluminum Construction
• Length: 5.2 inches
• Weight: 7.8 oz

Features:

• Combo includes: VECO434QRBM2 + DDABG + ASPCMD
• VISM ECO Prismatic scope combined with the NcSTAR Green Micro Dot giving you the Ultimate Enhanced Combat Optic combo!
• 4X Magnification 34mm scope with two forward mounted Green Laser pod and Red/White LED Navigation light pod.
• Top mounted Backup Iron rear peep sight and fiber optic front sight post. There are three different mounting positions for the Iron Sights.
• Top of the ECO scope has an integrated NcSTAR Micro Dot reflex dot sight base for mounting a secondary reflex optic to the top of the scope.
• Fully adjustable Green Laser (elevation & windage).
• White & Red Navigation LED Lights for maneuvering in the dark. Lower powered lighting helps preserves users night vision and their ability for their eyes to see in the dark. Supplements bright tactical lights which may be too bright to use for navigation.
• New glass etched Urban Tactical reticle (Blue illuminated) for quick target acquisition. Electronic Control Panel for: Blue reticle illumination levels Green Laser On/Off and NAV LED Light cycles mode to Red LED/ White LED/ Off.
• Electronic Control Panel for Blue reticle illumination levels Green Laser On/Off and NAV LED Light: On/Off and Color LED Light selection (Red/ White).
• Integrated auto locking quick release mount fits weaver/ Picatinny/ MIL-STD 1913 type rails.
• Uses 1 CR123A Lithium Type Battery (Included).
• Black Anodized aluminum body

 

Specs:

• MAGNIFICATION: 4X
• ILLUMINATED RETICLE COLOR: BLUE
• OBJECTIVE DIA.: 34mm
• EYE RELIEF: 2.3"
• EXIT PUPIL: 8.5mm
• FOV @ 100 YRDS: 29.2'
• CLICK VALUE: 1/4" MOA
• LENS COATING: GREEN
• BODY COLOR: BLACK ANDIZED FINISH
• LENGTH: 6.3
• WEIGHT: 21.0 oz. (with DDAB Micro Red Dot)
• DOT SIZE: 2 MOA
• LENS COATING: RUBY
• WEIGHT: 2.4 oz.
• LENGTH: 1.8"

 

• Improved Locking Quick Release mount and a more compact QR Lever
• Improved Scope Centerline height raised to AR15 1-1/2" scope height and more room for low profile Rear BUIS
• Improved Lowered BDC Turret height for lower mounting height for the optional 34mm Micro Dot mount and optic
• Blue & Green Color Illuminated reticle with multiple brightness settings for each color
• 100-500 yard Bullet Drop Compensator (BDC) calibrated for M193 55gr. FMJ Mil-Spec ammo
• Quick Focus Eyepiece
• Fully Multi Coated Lenses
• Integrated Slant Cut Sun Shade
• Black Anodized Aluminum Body
• Includes lens covers and batteries
• US PATENT: US D732633

3 Watt Bright CREE LED 250 Lumen max output. Bezel mounted Mode Selector Ring. You can quickly switch between High and Low Intensity and Strobe feature. Strobe Flashlight feature will disorientate your target and extend battery life.

• Custom two-way steel pocket clip can be clipped onto clothing in either direction/orientation.
• Push Button Rubber On/Off switch.
• Black Anodized Aluminum Construction
• Tailcap Body factory machined for a lanyard (not included).
• Flashlight central body diameter is 0.83″.
• Uses 1 CR123A Lithium Type Battery (Included)
• Length: 3.94″
• Weught: 3.1 oz. (with Battery)
• US PAT. D804696

NcSTAR's 3rd Generation MAR4S .223/5.56 Carbine Length Quad Rail Handguard. The 3rd Gen MAR4S is now lighter and has a slimmer profile than earlier models.

• Fits onto carbine length gas system using the GI Handguard Cap and Delta Ring
• The Solid Quad Rail provides the steady platform attaching: Optics Lasers Flashlights Verticle Grip Bipod and other accessories.
• Large ventilation holes to help keep the barrel cool
• Very easy to install with four Allen head screws and the provided mounting tool. No gunsmithing required drop-in fit.
• All Aluminum Construction. Black Anodized finish
• Laser engraved rail markings (white)
• Length: 6.5" (6.7" O.A.L.)
• Width: 2.3"
• Height: 2.3"
• Weight: 9.9 oz