The Noveske Bolt Carrier Group features a full auto carrier with a staked gas key. The bolt is machined from 158 Carpenters Steel. The bolt is then Shot peened and MP tested to ensure years of rugged use without fail. Mil-Spec bolt face works for standard cartridges, such as 5.56mm and 300 Blackout.
The Noveske A2 Flash Suppressor is a standard-style muzzle device compatible with 5/8X24 muzzle threads. It features the familiar A2 profile and an open-ended design to reduce visible muzzle flash. The suppressor is made of steel and finished with a durable black coating for corrosion resistance.
The Noveske A2 Flash Suppressor is a standard-style muzzle device for 5.56mm rifles and compatible with 1/2X28 muzzle threads. It features the familiar A2-style profile and an open-ended design to reduce visible muzzle flash. The suppressor is made of steel and finished with a durable black coating for corrosion resistance.
The Noveske Stainless Lo-Pro DDF Barrel is chambered in 5.56mm and constructed from 416R stainless steel with a 1:7 twist. It features an Extra Thicc contour with disruptive deep fluting, a hand-polished Noveske Proprietary Match chamber, extended hand-polished feed ramps, a pinned .936″ low-profile gas block, and a 60-degree muzzle crown.
The Noveske Stainless Lo-Pro Gas Block Barrel is a 5.56mm barrel made from 416R stainless steel, with a 1:7 twist rate and a hand-polished, proprietary Noveske Match chamber. It features a pinned .750″ low-profile gas block, an M4-style barrel extension with extended feed ramps, 1/2X28 muzzle threads, and a 60-degree crown. Each barrel is individually serialized and includes a gas tube matched to its gas system.
The Noveske Stainless Lo-Pro Gas Block Barrel is a 5.56mm barrel made from 416R stainless steel, with a 1:7 twist rate and a hand-polished, proprietary Noveske Match chamber. It features a pinned .750″ low-profile gas block, an M4-style barrel extension with extended feed ramps, 1/2X28 muzzle threads, and a 60-degree crown. Each barrel is individually serialized and includes a gas tube matched to its gas system.
The Noveske Stainless Lo-Pro DDF Barrel is a 6mm ARC barrel crafted from 416R stainless steel, with a 1:7 twist and a hand-polished Match chamber. It features Noveske’s Disruptive Deep Fluting (DDF) design, a pinned low-profile gas block, extended feed ramps, and a 5/8X24-threaded muzzle. Each barrel is individually serialized and includes a headspaced, DLC-coated 6mm ARC bolt and a gas tube matched to the gas system.
This receiver extension is what is used on all of Noveske’s N6, large frame AR, firearms. They use N6 springs, and H3 buffers in their receivers.
End Plate for Glock Pistols with the Noveske Cross Logo.
The Noveske Stainless Lo-Pro Gas Block Barrel is a 5.56mm barrel made from 416R stainless steel, with a 1:7 twist rate and a hand-polished, proprietary Noveske Match chamber. It features a pinned .750″ low-profile gas block, an M4-style barrel extension with extended feed ramps, 1/2X28 muzzle threads, and a 60-degree crown. Each barrel is individually serialized and includes a gas tube matched to its gas system.
Bolt carrier group with DLC exterior coating specification, and a chrome lined bore. Machined to USGI specifications and made out of Aircraft grade 8620 Steel. This M16/M4 carrier includes mil-spec gas key, which is chrome lined and heat treated.
This mount is compatible with a range of heads, tails and tail-switch options. Any Surefire E-Series and 3 volt Scout Light heads. Tails that use a single CR123 battery will work with this body.
This mount is compatible with a range of heads, tails and tail-switch options. Any Surefire E-Series and 3 volt Scout Light heads. Tails that use a single CR123 battery will work with this body.
This mount is compatible with a range of heads, tails and tail-switch options. Any Surefire E-Series and 3 volt Scout Light heads. Tails that use a single CR123 battery will work with this body.
This mount is compatible with a range of heads, tails and tail-switch options. Any Surefire E-Series and 3 volt Scout Light heads. Tails that use a single CR123 battery will work with this body.
DLC exterior coated to Noveske specification with chrome lined bore. Machined to USGI specifications. Carrier is made out of Aircraft grade, domestically sourced proprietary 8620 steel. This M16/M4 carrier includes the proper Mil-Spec gas key. Gas key is chrome lined and heat treated per GI specifications. Gas key is secured to carrier via USGI domestically manufactured Grade 8 fasteners and properly staked per Mil-Spec.
Noveske marked Phosphate full auto carrier with chrome lined bolt bore and chrome lined gas key. Properly staked gas key, which includes firing pin, retaining pin, and cam pin. For AR-15s.
This receiver extension is what is used on AR platforms. It’s features a Noveske engraving on the underside of the receiver. It is a Carbine Length extension with a FDE cerakote.
This receiver extension is what is used on AR platforms. It’s features a Noveske engraving on the underside of the receiver. It is a Carbine Length extension with a Tiger Eye cerakote.
The perfect companion when you purchase an N6 barrel from Noveske. Carrier fits perfectly with N6 barrels as they come with correct bolt and firing pin.
The Noveske Chainsaw Upper Receiver is a forged 7075-T6 aluminum receiver with extended feed ramps and a Type III hardcoat anodized finish. It includes a black nitride Noveske-marked forward assist and an ambidextrous Noveske Love Handle charging handle. The receiver features an anti-rotation interface designed to work with the handguard and is paired with a phosphate-coated, full-auto-compatible bolt carrier group featuring a chrome-lined carrier bore and key.
The Love Handle is engineered for smooth and reliable operation, for minimal friction and resistance. Ambidextrous compatibility, this charging handle accommodates both right and left handed shooters. The charging handle effectively mitigates gas blowback due to its gas fence design.