YOU MUST BE 18 OR OLDER TO ENTER

FEATURES
-1/2″ drive 1 3/8″ jumbo crowfoot wrench for your ODIN Works .308 KeyMod Forend installation
-Use to torque the barrel nut to 40-50 ft. lbs.
-NOT compatible with the ODIN Works AR15 KeyMod Forend barrel nut

FEATURES
-1/2″ drive 1 1/4″ jumbo crowfoot wrench for your ODIN Works .223/5.56 Forend installation
-Use to torque the barrel nut to 40-50 ft. lbs.
-NOT compatible with the ODIN Works.308 KeyMod Forend barrel nut

FEATURES:
-1/2″ drive 1 3/16″ jumbo crowfoot wrench for your ODIN Works Ragna Forend installation
-Use this crowfoot wrench to torque the barrel nut to 40-50 ft lbs.

Machined from 416 heat treated stainless steel, no part on the carrier is MIM (metal injection molding). The black carrier has a Micro Slick coating, whereas the grey is not MS coated to show its stainless steel finish. Instead of the traditional alignment key they have two heat treated screws that are also roll pinned onto the carrier. To ensure easy service of your carrier, they used a proprietary firing pin retainer that can be removed with ease, instead of a cotter pin. Being able to easily service your carrier will add to it’s life.

Machined from 416 heat treated stainless steel, no part on the carrier is MIM (metal injection molding). The black carrier has a Micro Slick coating, whereas the grey is not MS coated to show its stainless steel finish. Instead of the traditional alignment key they have two heat treated screws that are also roll pinned onto the carrier. To ensure easy service of your carrier, they used a proprietary firing pin retainer that can be removed with ease, instead of a cotter pin. Being able to easily service your carrier will add to it’s life.

This Enhanced complete lower parts kit comes with all major parts Nitride Coated. Nitride Coating increases part finish hardness, toughness, and adhesion. Comes with winter trigger guard. Made in the U.S.A!

FEATURES
-Black
-Made from 7075 billet aluminum
-Ergonomic design for easy gripping
-Upgrades any Mil-Spec charging handle
-Allows for faster & smoother operation of the charging handle

FEATURES:
-Red
-Made from 7075 billet aluminum
-Ergonomic design for easy gripping
-Upgrades any mil spec charging handle

FEATURES:
-Red
-Made from 7075 billet aluminum
-Ergonomic design for easy gripping

FEATURES
-FDE anodized finish
-Machined from billet 6061 aluminum
-Works with both AR15 & AR10 lower receivers
–Compatible with BAD lever – Will NOT work with anti-walk pins unless you modify the XMR2
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine without changing grip or position
-Contoured for positive depression & reduced slip
-Weight: 0.1 oz. (including button, paddle & screws)

FEATURES:
-Gun Metal Grey
-Compatible with BAD lever
-Will not work with anti-walk pins unless you modify the XMR2
-.1 oz. (including paddle, button, & screws)
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine without changing grip or position
-Contoured for positive depression & reduced slip

FEATURES
-Red anodized finish
-Machined from billet 6061 aluminum
-Works with both AR15 & AR10 lower receivers
–Compatible with BAD lever – Will NOT work with anti-walk pins unless you modify the XMR2
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine without changing grip or position
-Contoured for positive depression & reduced slip
-Weight: 0.1 oz. (including button, paddle & screws)

FEATURES:
-Compatible w/ BAD Lever & KNS Pins
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip
-Black

FEATURES:
-Made from 6061 Aluminum
-Largest profile yet, making it easily accessible by all shapes & sizes of hands & fingers
-Works w/ both AR15 & AR10 lower receivers
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip

FEATURES:
-Made from 6061 Aluminum
-Largest profile yet, making it easily accessible by all shapes & sizes of hands & fingers
-Works w/ both AR15 & AR10 lower receivers
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip

FEATURES:
-Compatible w/ BAD Lever & KNS Pins
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip
-Red

FEATURES:
-Compatible w/ BAD Lever & KNS Pins
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip
-Silver

FEATURES:
-Allows you to rapidly change mags w/out disrupting your shooting pattern
-Ambidextrous
-Easy to reach
-Ergonomic design
-Contoured for positive depression & reduced slip

FEATURES:
-Gun Metal Grey
-Compatible with KNS pins
-Not recommended for use with BAD lever
-Four times larger than factory magazine buttons
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine without changing grip or position
-Contoured for positive depression & reduced slip
-Weight: 0.15oz (including button, paddle, and screws)
-All parts included
-Easy drop in installation

FEATURES
-M-LOK 1″ Flashlight Mount
-100% CNC machined out of 6061 billet aluminum
-1.03″ internal diameter designed to fit any 1″ flashlight
-Mount can be placed at 1, 5, 7, & 11 o’clock positions
-Adjusts in 1/2 slot increments for precise accessory placement
-No access to back side of the rail is required
-Accessories can mount with either end facing forward
-Works with both metal & polymer accessories
-Includes M-LOK nuts, screws, & hex wrench

FEATURES
-12.5″ M-LOK O2 Lite Free Float Forend
-Made from 6005-T651 aluminum
-Hard anodized for durability
-Inside Diameter: 1.6″
-Outside Diameter: 1.8″W x 2.16″H
-The O2 lite is a full 20% lighter than its predecessors
-Engineered with advanced ergonomics for comfort & improved performance
-Accessory rails can be placed at 3, 6, & 9 o’clock positions & can be joined to create
continuous Pic Spec Rail
-Four or more QD attachment points
-Made to fit Magpul QD
-Engineered to allow for low profile gas block to fit inside

FEATURES:
-Free float
-Aluminum
-Engineered w/ advanced ergonomics for comfort & improved performance
-Continuous/uninterrupted Picatinny Rail across the top
-Accessory rails can be placed at 3, 6, & 9 o’clock positions
-QD sling mount positions at 3 & 9 o’clock
-Length: 12.5″
-Weight: 5.6oz.

FEATURES
-15.5″ M-LOK O2 Lite Free Float Forend
-Made from 6005-T651 aluminum
-Hard anodized for durability
-Inside Diameter: 1.6″
-Outside Diameter: 1.8″W x 2.16″H
-The O2 lite is a full 20% lighter than its predecessors
-Engineered with advanced ergonomics for comfort & improved performance
-Accessory rails can be placed at 3, 6, & 9 o’clock positions & can be joined to create
continuous Pic Spec Rail
-Four or more QD attachment points
-Made to fit Magpul QD
-Engineered to allow for low profile gas block to fit inside