Designed for all 5.7mm variants. This compact and portable cleaning kit includes Breech-to-Muzzle cleaning gear plus precision cleaning tools. Made in the USA and contained in a lightweight, compact softpack case. Includes: *100% cotton 2 patches and small slotted tip *5.56mm bronze bore brush with size marked on brush stem *Oversized bore brush for chamber cleaning *8, 12 and 20 aircraft grade Memory-Flex cables for proper Breech-to-Muzzle cleaning *End brush, scraper, straight & bent pick, short AP brush and rod handles for more precise cleaning *Chamber flag, 0.5 fl.oz. Shooter’s Choice FP-10 CLP, and instruction manual
The PATRIOT Series Cleaning Kit by Otis offers the essential firearm maintenance gear to properly clean from Breech-to-Muzzle. Each cleaning kit is designed to clean one caliber or gauge and features a new tool that acts as both a T-handle and a driver for the included 4 bits. Made in the USA and at a price that won?t break the bank you can pick one up for every firearm that you own. Available in 8 configurations.
- Memory-Flex cable slotted tip & bore mop for effective and correct Breech-to-Muzzle® cleaning
- Caliber specific bronze bore brush removes deposits and other fouling.
- Tool acts as t-handle and driver for included 4 bits.
- Double ended AP brush for cleaning hard to reach areas.
- Chamber brush rod curved and straight locking lug pick for proper cleaning of chamber and locking lugs*.
- *only available in .223 cal/5.56mm version.
The PATRIOT Series Cleaning Kit by Otis offers the essential firearm maintenance gear to properly clean from Breech-to-Muzzle. Each cleaning kit is designed to clean one caliber or gauge and features a new tool that acts as both a T-handle and a driver for the included 4 bits. Made in the USA and at a price that won’t break the bank you can pick one up for every firearm that you own. Available in 8 configurations.
- Memory-Flex cable slotted tip & bore mop for effective and correct Breech-to-Muzzle® cleaning
- Caliber specific bronze bore brush removes deposits and other fouling.
- Tool acts as t-handle and driver for included 4 bits.
- Double ended AP brush for cleaning hard to reach areas.
- Chamber brush rod curved and straight locking lug pick for proper cleaning of chamber and locking lugs*.
- *only available in .223 cal/5.56mm version.
The PATRIOT Series Cleaning Kit by Otis offers the essential firearm maintenance gear to properly clean from Breech-to-Muzzle. Each cleaning kit is designed to clean one caliber or gauge and features a new tool that acts as both a T-handle and a driver for the included 4 bits. Made in the USA and at a price that won?t break the bank you can pick one up for every firearm that you own. Available in 8 configurations.
- Memory-Flex cable slotted tip & bore mop for effective and correct Breech-to-Muzzle® cleaning
- Caliber specific bronze bore brush removes deposits and other fouling.
- Tool acts as t-handle and driver for included 4 bits.
- Double ended AP brush for cleaning hard to reach areas.
- Chamber brush rod curved and straight locking lug pick for proper cleaning of chamber and locking lugs*.
- *only available in .223 cal/5.56mm version.
Otis Technology 100% cotton square gun cleaning patches are not only more absorbent, but will not leave streaks in your barrel. Includes 500 – 1 inch square patches
The PATRIOT Series Shotgun Cleaning Kit by Otis offers the essential firearm maintenance gear to properly clean from Breech-to-Muzzle. Each cleaning kit is designed to clean one caliber or gauge and features a new tool that acts as both a T-handle and a driver for the included 4 bits. Made in the USA and at a price that won’t break the bank you can pick one up for every firearm that you own. Available in 8 configurations.
- Memory-Flex cable slotted tip & bore mop for effective and correct Breech-to-Muzzle® cleaning
- Caliber specific bronze bore brush removes deposits and other fouling.
- Tool acts as t-handle and driver for included 4 bits.
- Double ended AP brush for cleaning hard to reach areas.
- Chamber brush rod curved and straight locking lug pick for proper cleaning of chamber and locking lugs*.
- *only available in .223 cal/5.56mm version.
Otis Technology 100% cotton square gun cleaning patches are not only more absorbent, but will not leave streaks in your barrel. Includes 100 – 2.5 inch square patches
Otis Technology 100% cotton square gun cleaning patches are not only more absorbent, but will not leave streaks in your barrel. Includes 100 – 3 inch square patches
Essential for Glock owners, this 8-in-1 tool from Otis handles a variety of maintenance needs for your pistol in a convenient size that easily fits in a pocket, range bag or pistol case. The base handle has four distinct purposes – 1/4” bit driver, 8-32 threaded insert to accommodate additional components, Memory-Flex cable slot for use as a T-handle, and punch hammer for resetting pins. The tool includes four bits that seat in the magnetized bit driver. The pin punch has additional length to fully push takedown pins through the frame. The front sight adjustment tool is magnetized for easy installation of the screw without losing the nut. The tool also comes with one 5/32” flat head and one #0 Philips bit.
The PATRIOT Series Cleaning Kit by Otis offers the essential firearm maintenance gear to properly clean from Breech-to-Muzzle. Each cleaning kit is designed to clean one caliber or gauge and features a new tool that acts as both a T-handle and a driver for the included 4 bits. Made in the USA and at a price that won’t break the bank you can pick one up for every firearm that you own. Available in 8 configurations.
- Memory-Flex cable slotted tip & bore mop for effective and correct Breech-to-Muzzle® cleaning
- Caliber specific bronze bore brush removes deposits and other fouling.
- Tool acts as t-handle and driver for included 4 bits.
- Double ended AP brush for cleaning hard to reach areas.
- Chamber brush rod curved and straight locking lug pick for proper cleaning of chamber and locking lugs*.
- *only available in .223 cal/5.56mm version.
The Otis AP Blue Nylon All Purpose Brushes Double ends allow for large surface scrubbing on one end and precision cleaning with the smaller end. Removes fresh carbon or powder residue but won’t scratch your firearm finish. For everyday use and can be used on virtually any surface including wood surfaces. Nylon bristled brush meets Mil. Spec.
Properly cleaning and maintaining your airguns is a lot like cleaning your traditional firearms but there are some important differences. The Airgun Maintenance & Cleaning Kit from Otis Technology takes those differences into consideration and offers a complete kit designed with airguns in mind. Complete in these kits you’ll find a silicone-based lubricant and silicone gun cloth to lubricate and protect your airgun while maintaining the integrity of o-rings seals and gaskets. A 7-piece Hex L-wrench set that ranges from .71mm to 3mm aids in disassembly of your airguns for maintenance work. A bent pick helps easily remove o-rings and the AP brush as well as the end brush offer detail cleaning or lubricant application. This kit also includes Breech-to-Muzzle cleaning gear – a 34” Memory-Flex cable with affixed slotted tip and (10) 2” patches for proper bore cleaning. With a complete lens cleaning set also included you’ll be able to maintain your optic with this kit too. And when you’re all done clean the lead and other heavy metals from your skin with the included lead cleaning hand wipe. All contained in a tackle-box style case.
- Complete Airgun Maintenance & Cleaning Kit ideal for all types of airguns
- Silicone-based lubricant can be safely used on o-rings/seals/gaskets without degradation
- Lubricant includes needle point applicator for precision application
- Silicone gun cloth also included to wipe polish and protect your airgun
- Hex L-wrench set (.71 .89 1.27 1.5 2 2.5 & 3mm) aids in airgun disassembly for maintenance work
- Remove o-rings with the included bent pick
- AP brush and End Brush for detailed cleaning or application of lubricant
- Memory-Flex cable (34”) and 2” patches allow for proper Breech-to-Muzzle cleaning of the bore
- Lens gear included (lens brush lens tissue lens cloth lens spray 0.5 fl oz cotton swabs (6)) for maintenance and care of your scope and other optics
- Lead cleaning hand wipe included to cleanse hands of lead and heavy metals from skin
- Made in USA
The All Caliber Rifle Cleaning System is ideal for all rifles including lever actions bolt actions and autoloaders. This premium cleaning system will clean all rifles from .17 caliber through .45 caliber. This kit contains three Memory-Flex® cleaning rods; a 30″ cleaning rod an 8″ chamber cleaning rod and a 34? small caliber cleaning rod with a brass slotted tip. Also included are two solid brass slotted tips two brass obstruction removers to knock out mud snow or a stuck case a rod connector a T-handle bar for added comfort when pulling a patch down the barrel a .5oz tube of Otis O85® Ultra Bore® Solvent all-caliber cotton cleaning patches and the .22 and .35 caliber bore brushes. The black nylon case comes standard with a locking zipper and belt loop attachment. Make your next hunt a success by using Otis.
? Caliber/Gauge: .17 – .45 Caliber Rifles
? Dimensions: 4″ x 4″ x 2″
The Armorer’s Pistol Tool offers four tools in one to service and maintain semi-automatic pistols such as Glock, Sig Sauer, Smith & Wesson, Ruger, Taurus, FNH, and H&K. Unscrew the nylon end brush to reveal a storage area for additional tools. The 3/32” pin punch knocks out pins with ease for convenient disassembly. Install, adjust or remove aftermarket front sight with the 3/16 nut driver. The brass scraper allows removal of the trigger connector while also scraping carbon. A nylon end brush allows safe cleaning of debris without damaging finish. The main body of the tool is textured for increased grip while working.
The B.O.N.E. Tool is specifically designed to clean carbon and fouling from the bolt carrier of MSR/AR-style rifles. This tool scrapes fouling from the bolt, bolt carrier and firing pin. Includes an 8-32 threaded hole to act as a T-handle.
MSR/AR owners know the importance of a clean bolt and bolt carrier group. Carbon and fouling can build-up in these areas causing jams and malfunctions. The B.O.N.E. Tool was designed specifically to clean the bolt carrier assembly area.