Features:
- 50-round drum magazine
- Fits the Glock Model 48 and 43X 9mm pistols
- Drum housing constructed of a proprietary DuPont Zytel based polymer
- Magazine upper tower has full length steel internal insert stamped and welded like the factory magazine
- Injection molded magazine follower
- Magazine spring formed from heat treated stainless steel
- Made in U.S.A.
20 RD magazine for The HK 93 rifle. The magazine body and follower are constructed of a proprietary DuPont Zytel based polymer to ensure a long service life. The springs are made from heat treated Chrome-silicon wire for increased reliability and smooth feeding.
A 30 RD magazine for The HK 93 rifle. The magazine body and follower are constructed of a proprietary DuPont Zytel based polymer to ensure a long service life. The springs are made from heat treated Chrome-silicon wire for increased reliability and smooth feeding.Made in the U.S.A.
A 40 RD magazine for The HK 93 rifle. The magazine body and follower are constructed of a proprietary DuPont Zytel based polymer to ensure a long service life. The springs are made from heat treated Chrome-silicon wire for increased reliability and smooth feeding. Made in the U.S.A..
A 20-rd magazine for the Heckler & Koch USC carbine in .45acp. The magazine body and follower are constructed of a proprietary DuPont Zytel based polymer to ensure a long service life. The springs are made from heat treated Chrome-silicon wire for increased reliability and smooth feeding.Made in the U.S.A.
A 12-rd magazine for the Heckler & Koch USP (Full Size) pistol in .45acp. The magazine body is constructed with heat-treated blued-steel with a follower constructed of a proprietary DuPont Zytel based polymer to ensure a long service life. The springs are made from heat treated Chrome-silicon wire for increased reliability and smooth feeding.Made in the U.S.A.
An extended 20-rd magazine for the Heckler & Koch USP (Full Size) pistol in .45acp. The magazine body is constructed with heat-treated blued-steel with a follower constructed of a proprietary DuPont Zytel based polymer to ensure a long service life. The springs are made from heat treated Chrome-silicon wire for increased reliability and smooth feeding. The magazine has an o/a length of 7.25? and includes a molded grip-sleeve to fill the gap between the end of the grip-frame and the magazine base-plate.Made in the U.S.A.
HEC-A15 H&K VP9 9MM (17) RD Blue Steel Magazine
HEC-A16 H&K VP9 9MM (32) RD Blue Steel Magazine
- 40-round drum magazine
- Fits the HI-POINT 4595TS .45 ACP Carbine
- Drum housing constructed of a proprietary DuPont Zytel based polymer
- Magazine upper tower has full length steel internal insert stamped and welded like the factory magazine
- Injection molded magazine follower
- Magazine spring formed from heat treated stainless steel
- Made in U.S.A.
A blue-steel magazine holding 10-rd of 9mm ammunition for the Hi-Point 995/995TS. This magazine comes with a follower and bumper/base plate made of an impact-resistant black polymer material; and uses heat treated Chrome-silicon wire for reliable feeding and long spring life.
An extended (3.75_) blue-steel magazine holding 15-rd of 9mm ammunition for the Hi-Point 995/995TS. This magazine comes with a follower bumper/base plate and comfortable grip-sleeve made of an impact-resistant black polymer material; and uses heat treated Chrome-silicon wire for reliable feeding and long spring life.
Features:
- 15-round magazine
- Fits Hi-Point JPX 10mm pistol
- Magazine body constructed of heat treated steel with black oxide finish
- Injection molded magazine follower
- Magazine spring formed from heat treated chrome silicone wire
- Made in USA
An extended (3.75_) blue-steel magazine holding 15-rounds of .40S&W ammunition for the Hi-Point 4095TS. This magazine comes with a follower bumper/base plate and comfortable grip-sleeve made of an impact-resistant black polymer material; and uses heat treated Chrome-silicon wire for reliable feeding and long spring life.
An extended (3.75_) blue-steel magazine holding 14 rounds of .45ACP ammunition for the Hi-Point 4595TS. This magazine comes with a follower bumper/base plate and comfortable grip-sleeve made of an impact resistant black polymer material; and uses heat treated Chrome-silicon wire for reliable feeding and long spring life.
This (7) RD 12 gauge shell carrier mounts to the side of the receiver on Remington 870® shotguns. Precision molded polymer shell carrier and aluminum mounting plate securely hold 7 additional rounds for fast tactical reloads of the magazine tube. A patent pending retention adjustment system has been integrated and can adjust individual tension for each shell allowing the user to fine tune the shell carrier for specific ammunition and the level of retention required. A rubber molded gasket fits between the mount and the receiver to protect the firearms finish. Shell carrier will not contact or interfere with the pump action forend when used with military length forends. All hardware is included.
Features
- (7) RD 12 Gauge Shell Carrier
- Patent Pending Individual Tension/Retention Adjustment For Each Shell
- Shell Carrier Constructed Of Super Tough Carbon Fiber Filled Polymer
- Anodized Aluminum Mounting Plate With Rubber Gasket
- For Use with Military Length Forends
- Fits Remington 870 12 Gauge Models Only
- All Hardware Included
This (7) RD 12 gauge shell carrier mounts to the side of the receiver on Mossberg 500 /590 model shotguns. Precision molded polymer shell carrier and aluminum mounting plate securely hold 7 additional rounds for fast tactical reloads of the magazine tube.
A patent pending retention adjustment system has been integrated and can adjust individual tension for each shell allowing the user to fine tune the shell carrier for specific ammunition and the level of retention required. A rubber molded gasket fits between the mount and the receiver to protect the firearms finish. Shell carrier will not contact or interfere with the pump action forend when used with military length forends. All hardware is included.
Features
- (7) RD 12 Gauge Shell Carrier
- Patent Pending Individual Tension/Retention Adjustment For Each Shell
- Shell Carrier Constructed Of Super Tough Carbon Fiber Filled Polymer
- Anodized Aluminum Mounting Plate With Rubber Gasket
- For Use with Military Length Forends
- Fits Mossberg 500 & 590 12 Gauge Models Only
- All Hardware Included
Black two-piece railed hand-guard for AR-15 carbines constructed of a high impact glass filled nylon polymer with integral aluminum heat-shield inserts. Features mil-spec Picatinny rails at the 12 3 6 and 9 o?clock positions for mounting sights tactical lights vertical grips and other accessories.
An advanced Tactical Stock System for the Remington 870® 12 gauge shotgun utilizing a proprietary lightweight carbon-fiber reinforced polymer ? impervious to weather and able to withstand all standard gun solvents and oils. A six-position collapsible butt-stock allows shot-gunners of all sizes to find the optimum adjustment for fit and comfort. The military-length forend can be configured with a smooth fore-cap or with a mini tri-rail cap to allow the mounting of Picatinny rail-mount accessories without sacrificing comfort or convenience. A 7-place shell carrier mounts to the left side of the receiver and includes individual shell-retention adjustment for each round without interfering with the stroke of the forend.
FEATURES
- Extremely durable construction yet weighs only 2.5 lbs.
- 6 position buttstock
- Ergonomic pistol grip with storage
- Tunable interchangeable-insert recoil pad ? soft and firm inserts included
- Molded in QD sling swivel hardpoints ? L&R
- Detachable cheek riser
- AA112 7-place shell carrier included (AA870SC only ? not with AA870) Remington and 870 are Registered Trademarks of the Remington Arms Company Inc.
he “Swiss Pattern” vertical foregrip attaches to forend rails quad forends or any Picatinny rail. The foregrip provides a natural grip and operation of flashlights lasers and other weapon mounted accessories. Manufactured from injection-molded Zytel-based black polymer. No tools or hardware required. No permanent modification required
ProMag KAR 01 A blue-steel magazine holding 7-rd of 9mm ammunition for the Kahr K9 P9 and E9 pistol. This magazine comes with a follower and bumper/base plate made of an impact-resistant black polymer material.
A blue-steel magazine holding 8 rounds of 9mm ammunition for the Kahr K9 P9 and E9 pistol. This magazine comes with a follower and bumper/base plate made of an impact-resistant black polymer material; and uses heat treated Chrome-silicon wire for reliable feeding and long spring life. The magazine extends past the bottom of the grip-frame slightly.