Replacement stock assembly for the Q Honey Badger. This stock is only compatible with the Honey Badger receiver, and will not work standard AR/M4 receivers.
The Honey Badger's stainless steel barrel features an adjustable gas block 25° tapered muzzle and is compatible with mil-spec AR receivers.
FEATURES & SPECS:
Standard AR/M4 Barrel Extension
Indexed Adjustable Gas Block
Q's stainless steel Gas Block is "infinitely" adjustable utilizing stainless set screws. One screw to increase or restrict the flow of gas to the system and another to lock the adjustment screw in place. The Gas Block uses an index pin to guarantee gas port alignment and is held in place with a Gas Block Jam Nut. This alleviates the need for set screws or damaging taper pins leaving the barrel's integrity intact.
Tapered Muzzle – The 25° Tapered Muzzle provides several advantages over the traditional 90° shoulder.
- Improved concentricity of muzzle accessories and silencers to the axis of the barrel's bore.
- Better accuracy and repeatability (point-of-impact shift) when removing and reinstalling silencers.
- Increased surface area preventing accessories and silencers from coming loose without the need for adhesives and unnecessary amounts of torque.
INDIVIDUAL BARREL SPECS
- 7 IN 300 BLK | 1:5 TWIST | 5/8-24 THREAD | .97 LB | PISTOL GAS TUBE
The Two-Piece Bolt Carrier Group.
The Two Piece BCG is designed to be manufactured on modern equipment using modern materials.
Q's BCG consists of 2 sections; The Front-End and The Ass-End
The front end is made up of Maraging Stainless Steel dressed in black with a Nitride Coating and is SCAR-Cut to help prevent bolt bounce.
Standard with:
- Mil-Spec Gas Key and Staking
- Mil-Spec Bolt
- Mil-Spec Cam Pin
- Mil-Spec Firing Pin
The Ass-End is naked Stainless Steel heat treated of course and yes the overall length is Mil-Spec.
The Ass-End holds the firing pin doing away with pesky firing pin retaining pins. No more broken pins. You're welcome.
The Carrier is retained with a single Pin allowing for easy field stripping.
Features:
- Caliber: 300 Blk
- Clear Hard Coat Anodized 7075 Aluminum Receivers (Shades Of Tan May Vary)
- Free Floating 6061 Aluminum M-lok Handguard (Shades Of Gray (Grey?) May Vary)
- 70° Safety Selector
- 2-position Collapsible Pdw Stock
- Adjustable Low-profile Gas Block
- Muzzle: 5/8-24 Threads Tapered Muzzle
- Trigger: 2-stage
- AR Controls
This is the 15" Honey Badger MLOK handguard by itself—no extra hardware no install kit just the handguard for those who already have the parts they need or are replacing an existing one.
It keeps the same lightweight construction and clean profile as the original while giving you extra length up front for grip control and accessories.
Simple swap.
Nothing extra.
What it’s good at:
- Replacing an existing Honey Badger handguard
- Giving you additional handguard length for accessories
- Maintaining the lightweight Honey Badger profile
- Working with existing Honey Badger mounting hardware
The Honey Badger 15" MLOK Handguard Kit gives you a longer handguard option for the platform adding space for accessories grip and whatever else you like to bolt to the front of your rifle. It keeps the same clean look and lightweight feel just with a little more real estate to work with.
Because not everyone runs their rifle the same way.
The kit includes everything you need to get it installed properly.
What it’s good at:
- Giving you more handguard length for grip and control
- Adding extra mounting space for lights lasers and other accessories
- Keeping the lightweight Honey Badger profile intact
- Installing clean with the included hardware
- Includes handguard barrel nut and Turnbuckle
Torque specs:
- Barrel Nut – 40 FOOT pounds
- Turnbuckle – 30 INCH pounds
The Honey Badger Handguard is compatible with all M4 upper receivers, comes in a 12″ M-LOK configuration. Comes with the Barrel Nut and Hardware.
The Honey Badger Handguard is compatible with all M4 upper receivers, comes in a 12″ M-LOK configuration.
The Honey Badger Handguard is compatible with all M4 upper receivers, comes in a 6″ M-LOK configuration. Comes with the Barrel Nut and Hardware.
The Q Multi Tool provides you with all the tools you need for maintaining your Honey Badger. Constructed of Stainless Steel and will fit perfectly in your range bag.
The original Honey Badger was developed at AAC by previous owner and Q CEO Kevin Brittingham and his R&D team at the request of an elite US special operations group looking to replace their MP5-SD’s with an upgraded platform. Requirements included the ability to shoot a rifle caliber round while maintaining low visibility and excellent signature suppression. Developed in conjunction with 300 AAC Blackout the Honey Badger was born exceeded expectations but never made it to the commercial market.
Enter the Honey Badger by Q. At first glance this Honey Badger appears to be the same as the original. Q focused on taking the iconic ‘Badger to the next level and improved upon every technical aspect of the first-generation design. From the gas system to the trigger and telescoping pistol brace – HB 2.0 does not disappoint.
FEATURES & SPECS:
- CLEAR HARD COAT ANODIZED 7075 ALUMINUM RECEIVERS
- FREE FLOATING MLOK HANDGUARD
- 70° SAFETY SELECTOR
- 2-POSITION TELESCOPING STOCK
- ADJUSTABLE LOW-PROFILE GAS BLOCK
- MUZZLE: 5/8-24 Threads Tapered Muzzle Cherry Bomb Muzzle Brake
- TRIGGER: 2-Stage Match
- AR CONTROLS
7″ 300 BLK Pistol
- WEIGHT: 4 lbs 8 oz
- BARREL: 7 IN 1:5 TWIST
- HANDGUARD: 6 INCH MLOK
Replacement for your Honey Badger Handguard.
Enter the Hard Ass. A firmer, more durable Big Butt for your Fix. Designed to give you increased support and stability.
This new Deluxe bling for handguards is crafted out of 6061 aluminum with clear hardcoat anodizing. These were scientifically engineered with precision machinery.
ADAPTS ERECTOR 9 TO H&K TYPE TRI-LUG BARRELS AND MOUNTS. OVERALL SPECS:DIAMETER: 1.13 in. WEIGHT: 0.135 lbs. OVERALL LENGTH: ~1.95 in. ATTACHMENT: H&K TYPE TRI-LUG BARRELS AND MOUNTSMATERIALS(S): 17-4 STAINLESS STEEL AND 7075 ALUMINUMFINISH: AS HEAT TREATED AND HARD COAT ANODIZE, RESPECTIVELY
The 8.6 BLK Flash Hider by Q is a Quickie Fast-Attach flash hider compatible with the PORQ CHOP and short CHOP silencers by Q. 5/8×24 features 13/16 in flats, and 1/2×28 features 3/4 flats for easy install and removal.