Following the introduction of Bullet Seating Micrometers for Reddings standard series of seating dies their customers have been asking for complete die sets with this added precision. The upgrades includes combining a Carbide Size Button in the full length sizing die and the Bullet Seating Micrometer on the seating die.
Following the introduction of Bullet Seating Micrometers for Redding's conventional dies Redding created the "Premium Die Set" featuring a Carbide Size Button in the Full Length sizing die and a Bullet Seating Micrometer on the seating die.
- The Premium Deluxe Die Sets contains a Full Length Sizing Die with Carbide Size Button a Neck Sizing Die and a conventional Bullet Seating Die with a Bullet Seating Micrometer.
- The Full Length Die and conventional Seating Die can be used to reload ammunition for multiple rifles chambered for the same cartridge with proper adjustment.
- If reloading for a bolt-action rifle the cartridge cases may be neck sized only which may increase the accuracy potential of the ammunition being reloaded but may not chamber freely in other rifles.
- Redding Dies are carefully machined on precision lathes capable of holding the tightest tolerances in the industry and heat treated in atmospherically controlled furnaces for a lifetime of use.
Redding Reloading Equipment introduces a 3-Die Set for the recently announced 400 Legend. A 40-caliber heavy hitting straight-walled cartridge with moderate recoil which can be used in numerous different rifle actions including Modern Sporting Rifle platforms. Building off the success of its older sibling the 350 Legend the 400 Legend is designed primarily as a hunting cartridge and will be used in the deer woods across many regions of the North America.
The Type S – Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushings available in .001 in. increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to selfcenter on the case neck The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is A decapping pin retainer is also supplied with most Type S – Bushing Dies except 17 and 20 Cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.Set contains: Type S – Bushing Neck sizing DieBody DieRegular series 92000 Seating Die
Following the introduction of Bullet Seating Micrometers for the Redding standard series of seating dies their customers have been asking for complete die sets with this added precision. Redding has now added two popular upgrades to a select group of Series A dies to create the new Premium Series Die Sets. The upgrades include combining a Carbide Size Button in the full length sizing die and the Bullet Seating Micrometer on the seating die.
Two types of Premium Die Sets are available.
The Premium Full Length two (2) die set; contains a carbide Size Button in the full length sizing die and the Bullet Seating Micrometer on the seating die.
The Premium Deluxe three (3) die set; contains the Premium two (2) die set (described above) with the addition of a standard Series A neck sizing die.
Following the introduction of Bullet Seating Micrometers for Reddings standard series of seating dies their customers have been asking for complete die sets with this added precision. The upgrades includes combining a Carbide Size Button in the full length sizing die and the Bullet Seating Micrometer on the seating die.
Following the introduction of Bullet Seating Micrometers for the Redding standard series of seating dies their customers have been asking for complete die sets with this added precision. Redding has now added two popular upgrades to a select group of Series A dies to create the Premium Series Die Sets. The upgrades include combining a Carbide Size Button in the full length sizing die and the Bullet Seating Micrometer on the seating die.
Two types of Premium Die Sets are available.
The Premium Full Length two (2) die set; contains a carbide Size Button in the full length sizing die and the Bullet Seating Micrometer on the seating die.
The Premium Deluxe three (3) die set; contains the Premium two (2) die set (described above) with the addition of a standard Series A neck sizing die.
Following the introduction of Bullet Seating Micrometers for Reddings standard series of seating dies their customers have been asking for complete die sets with this added precision. The upgrades includes combining a Carbide Size Button in the full length sizing die and the Bullet Seating Micrometer on the seating die.
Redding Body Die – Body Dies are designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. They are made without internal parts and intended for use only to resize cases which have become increasingly difficult to chamber after repeated firing and neck sizing.
Shell Holder Sold Separately
Shell Holder #1
Redding Deluxe Die Set for Bottleneck Cases – Deluxe die sets for bottleneck cases contain three dies. They are a special packaging of our full length die seating die with the addition of a neck (NK) sizing die.
Deluxe 3 Die Set Includes:
• Full Length Sizing Die
• Neck Sizing Die
• Seating Die
Shell Holder Sold Separately
Shell Holder #1
Redding Full Length Die for Bottleneck Cases – The full length (FL) resizing die contains a decapping rod assembly with a neck expander (size button).
Shell Holder Sold Separately
Shell Holder #1
Redding Neck Die Set for Bottleneck Cases – Neck die sets for bottleneck cases contain two dies. The neck (NK) resizing die contains a decapping rod assembly with a neck expander (size button). The seating die (ST) includes bullet guide built in crimp ring and the proper seating plug.
Neck 2 Die Set Includes:
• Neck Resizing Die
• Seating Die
Shell Holder Sold Separately
Shell Holder #1 /
Redding Neck Sizing Die for Bottleneck Cases – The neck (NK) resizing die contains a decapping rod assembly with a neck expander (size button).
Shell Holder Sold Separately
Shell Holder #1
Seating Die for Bottleneck Cases – The standard seating die includes bullet guide built in crimp ring roll crimp feature and the proper seating plug.
Shell Holder Sold Separately
Shell Holder #1 /
Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The Redding Type S – Full Length Resizing/ Bushing Die accomplishes this task with the precision you would expect from Redding.
Redding Competition Bullet Seating Die features a seating stem precision ground to exactly match bullet diameter. No seating die on the market is built to this level of precision. The micrometer is calibrate in .001” increments for precise seating depth and is infinitely adjustable (without clicks). The micrometer also has a setting feature that allows you to set the micrometer to your rifle or favorite seating depth.
Type S Match Bushing Full Length 2 Die Set Includes:
• Type S Bushing Full Length Sizing Die
• Competition Seating Die
How to Determine Which Bushings You Need:
The easiest way to determine the proper diameter bushing is to measure the neck diameter of several loaded or dummy cartridges with an accurate micrometer. Subtract .001”- .002” from the average neck diameter and this diameter bushing will generally size case necks to create the proper press fit for the bullet.
Another method is to measure the neck thickness with a ball micrometer or Redding’s Case Neck Gauge. Double the wall thickness and add this number to the bullet diameter. The result is the neck diameter of a loaded cartridge and bushing size can be determined as above.
Shell Holder Sold Separately (not included)
Shell Holder #1
The Redding Type S – Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.
Contains: Type S – Bushing Neck Sizing Die Body Die & Regular Series 92xxx Seating Die. All dies are supplied without bushings.
- Uses interchangeable sizing bushings available in .001″ increments.
- The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired.
- Concentricity is enhanced by the ability of the resizing bushing to self-center
- on the case neck.
- The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is.
- A decapping pin retainer is also supplied with most Type S – Bushing Dies except 17 and 20 Cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
The Redding Type S Full Length Sizing Die sizes the entire case while maintaining exact control of the case neck.
It uses the same interchangeable bushings (sold separately) that are used in the Redding Bushing Style Neck Sizing Dies.
Features an adjustable decapping rod that allows adjustment of the bushing position and a decapping pin retainer that enables neck sizing without the use of the hardened steel size button for those who turn their case necks for uniformity.
Shellholder sold separately.
Following the introduction of Bullet Seating Micrometers for the Redding standard series of seating dies their customers have been asking for complete die sets with this added precision. Redding has now added two popular upgrades to a select group of Series A dies to create the new Premium Series Die Sets. The upgrades include combining a Carbide Size Button in the full length sizing die and the Bullet Seating Micrometer on the seating die.
Two types of Premium Die Sets are available.
The Premium Full Length two (2) die set; contains a carbide Size Button in the full length sizing die and the Bullet Seating Micrometer on the seating die.
The Premium Deluxe three (3) die set; contains the Premium two (2) die set (described above) with the addition of a standard Series A neck sizing die.
Following the introduction of Bullet Seating Micrometers for Reddings standard series of seating dies their customers have been asking for complete die sets with this added precision. The upgrades includes combining a Carbide Size Button in the full length sizing die and the Bullet Seating Micrometer on the seating die.
Following the introduction of Bullet Seating Micrometers for Redding's conventional dies Redding created the "Premium Die Set" featuring a Carbide Size Button in the Full Length sizing die and a Bullet Seating Micrometer on the seating die.
- The Premium Deluxe Die Sets contains a Full Length Sizing Die with Carbide Size Button a Neck Sizing Die and a conventional Bullet Seating Die with a Bullet Seating Micrometer.
- The Full Length Die and conventional Seating Die can be used to reload ammunition for multiple rifles chambered for the same cartridge with proper adjustment.
- If reloading for a bolt-action rifle the cartridge cases may be neck sized only which may increase the accuracy potential of the ammunition being reloaded but may not chamber freely in other rifles.
- Redding Dies are carefully machined on precision lathes capable of holding the tightest tolerances in the industry and heat treated in atmospherically controlled furnaces for a lifetime of use.