Full length die sets for bottleneck cases contain two dies. The full length (FL) resizing die contains a decapping rod assembly with a neck expander (size button). The seating die (ST) includes bullet guide built-in crimp ring and the proper seating plug.

Redding uses the finest alloy steels obtainable.
Redding dies are machined on Hardinge Super- Precision lathes capable of holding the tightest tolerances in the industry.
This allows Redding to guarantee that they will produce ammunition that will properly fit any standard (SAAMI) chamber regardless of action type.
To maintain tolerances and guarantee that your dies will last a lifetime all Redding dies are heat treated in atmospherically controlled furnaces.
Finally Redding dies are hand polished for smooth flawless functioning go through final inspection and are ultrasonically cleaned and packaged.
The die box is a handy cartridge loading block and storage package. Inside is a spare decapping pin hex wrench and even a place for your shellholder!
All Redding dies use the industry standard 7/8-14 threaded bodies.

The Redding Taper Crimp Die Set is designed for cartridges used in handguns with headspace on the case mouth and where more conventional roll crimping is not preferred. For people who do reloading and want a taper crimp and more uniformity the set is also available for certain revolver cartridges.

With a taper crimp the process is gentler and tighter which in turn holds the bullet more firmly in place. However the overall length of the cartridge is not compromised. Constructed from steel this set is made to last.

The quality and accuracy of your reloaded ammunition depends largely on the quality of the equipment you use to assemble it. Deluxe die sets for bottleneck cases contain three dies. They are a special packaging of Redding’s full length die sets with the addition of a neck (NK) sizing die. Reloading dies in Series B are slightly less popular or are more costly to produce than Redding’s Series A die sets

For over 60 years Redding has been ranked among the best when it comes to reloading equipment tools and accessories including these Full Length Die Sets. These sets are made specifically for bottleneck cases and include a full-length resizing die and a seating die.

The full-length die is used to resize cases and includes a decapping rod assembly along with neck expander. Then for the seating die there is the proper seating plug a crimping ring and bullet guide. All dies are made from steel and designed to provide years of service.

Reloading dies in the B Series are slightly less popular or are more costly to produce than our Series A die sets .

Redding Series Full length sizing die allows you to size the entire length of the cartridge case back to specifications.

The neck (NK) resizing die contains a decapping rod assembly with a neck expander (size button). The seating die (ST) includes bullet guide built in crimp ring and the proper seating plug. Reloading dies Series B are slightly less popular or are more costly to produce than the Redding Series A die sets. Neck die sets for bottleneck cases contain two dies.

Redding neck dies for bottleneck cases reshape the neck while leaving the body of the casing unsized for longer case life.

Redding Series B Seating Die (Only) for Bottleneck Cases 6.5 PRC

Die sets for straight wall cases contain three dies. This is necessary because it is not possible to full length resize straight wall cases and expand the neck for proper bullet fit in one operation. The full length (FL) resizing die contains a decapping rod assembly. The expander die (EXP) contains a neck expanding plug. The seating die (ST) includes bullet guide built-in crimp ring and the proper seating plug.

Series C dies are less popular than the die sets listed in Series A & B.

Redding uses the finest alloy steels obtainable.
Redding dies are machined on Hardinge Super- Precision lathes capable of holding the tightest tolerances in the industry.
This allows Redding to guarantee that they will produce ammunition that will properly fit any standard (SAAMI) chamber regardless of action type.
To maintain tolerances and guarantee that your dies will last a lifetime all Redding dies are heat treated in atmospherically controlled furnaces.
Finally Redding dies are hand polished for smooth flawless functioning go through final inspection and are ultrasonically cleaned and packaged.
The die box is a handy cartridge loading block and storage package. Inside is a spare decapping pin hex wrench and even a place for your shellholder!
All Redding dies use the industry standard 7/8-14 threaded bodies.

These molded seating dies feature a separate bottom punch for seating the case body to the shoulder. This is the preferred method for seating military and target bullets for long-term accuracy. When a crimp is necessary the expander ball is moved to the rear and the bullet is backed out the rest of the case. Because there is less wear on the case neck these dies are often used in sets with other dies. The benefit of the rear punch is that it allows a number of calibers to be used. Because both the pilot and seating stem are on the same side of the case neck the seating die is able to cycle smoothly and concentrically. Because there is less friction the case can be seated to the limit of the case neck rather than through the whole length of the case.

Deluxe die sets for bottleneck cases contain three dies. They are a special packaging of Redding's full length die sets with the addition of a neck (NK) sizing die.

Redding Series Full length sizing die allows you to size the entire length of the cartridge case back to specifications.

The Reloading die sets listed in this category represent the most popular dies that Redding produces. Although all Redding Dies are made to the same high quality standards Series A is the lowest price due to the efficiency of higher production.

The Redding Slide bar Automatic Primer Feeding System is a great time saver during the reloading process. The time saving advantages of a progressive press can never be fully realized if brass is still primed by hand. With the Redding Slide Bar Automatic Primer Feeding System brass is primed quickly and easily while it is on the press. This automatic priming system from Redding fits the Big Boss Single Stage Press and Redding T-7 Turret reloading press and includes both large and small primer tubes and a safety shield.

YOU MUST BE 18 OR OLDER TO ENTER