The Redding Turret Stacker is a convenient system for storing extra turret heads. Supplied with an assortment of spacers allowing up to three turrets to be stacked with dies installed thus preserving their adjustment. This system also prevents damage to decapping rods and pins when dies are not in use.
The Type S Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.
- Uses interchangeable sizing bushings available in .001 in. increments
- The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired
- Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck
- The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is.
- A decapping pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity
- All dies are supplied without bushings
- Carbide size button kits are also available for all Type S Dies
The Type S Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.
- Uses interchangeable sizing bushings available in .001 in. increments
- The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired
- Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck
- The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is.
- A decapping pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity
- All dies are supplied without bushings
- Carbide size button kits are also available for all Type S Dies
The Type S – Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.
- Uses interchangeable sizing bushings available in .001 in. increments
- The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired
- Concentricity is enhanced by the ability of the resizing bushing to selfcenter on the case neck
- The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is
- A decapping pin retainer is also supplied with most Type S – Bushing Dies except 17 and 20 Cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Set contains:
- Type S – Bushing Neck sizing Die
- Body Die
- Regular series 92000 Seating Die
- Uses interchangeable sizing bushings available in .001 in. increments
- The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired
- Concentricity is enhanced by the ability of the resizing bushing to selfcenter on the case neck
- The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is
- A decapping pin retainer is also supplied with most Type S – Bushing Dies except 17 and 20 Cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
- Type S – Bushing Neck sizing Die
- Body Die
- Regular series 92000 Seating Die
- Uses interchangeable sizing bushings available in .001 in. increments
- The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired
- Concentricity is enhanced by the ability of the resizing bushing to selfcenter on the case neck
- The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is
- A decapping pin retainer is also supplied with most Type S – Bushing Dies except 17 and 20 Cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
- Type S – Bushing Neck sizing Die
- Body Die
- Regular series 92000 Seating Die
- Uses interchangeable sizing bushings available in .001 in. increments
- The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired
- Concentricity is enhanced by the ability of the resizing bushing to selfcenter on the case neck
- The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is
- A decapping pin retainer is also supplied with most Type S – Bushing Dies except 17 and 20 Cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
- Type S – Bushing Neck sizing Die
- Body Die
- Regular series 92000 Seating Die
- Uses interchangeable sizing bushings available in .001 in. increments
- The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired
- Concentricity is enhanced by the ability of the resizing bushing to selfcenter on the case neck
- The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is
- A decapping pin retainer is also supplied with most Type S – Bushing Dies except 17 and 20 Cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
- Type S – Bushing Neck sizing Die
- Body Die
- Regular series 92000 Seating Die
- Uses interchangeable sizing bushings available in .001 in. increments
- The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired
- Concentricity is enhanced by the ability of the resizing bushing to selfcenter on the case neck
- The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is
- A decapping pin retainer is also supplied with most Type S – Bushing Dies except 17 and 20 Cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
- Type S – Bushing Neck sizing Die
- Body Die
- Regular series 92000 Seating Die
- Uses the same interchangeable bushings (.001″ increments) as those used in their bushing style neck sizing dies.
- The adjustable decapping rod allows you to adjust the bushing position sizing only part of the neck length when desired .
- Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case.
- All Type S (except 17 and 20 Cal.) dies are supplied with both the standard size button and a decapping pin retainer for the advantages and versatility described under NoslerType S – Bushing Style Neck Sizing Dies.
- Uses the same interchangeable bushings (.001″ increments) as those used in their bushing style neck sizing dies.
- The adjustable decapping rod allows you to adjust the bushing position sizing only part of the neck length when desired .
- Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case.
- All Type S (except 17 and 20 Cal.) dies are supplied with both the standard size button and a decapping pin retainer for the advantages and versatility described under NoslerType S – Bushing Style Neck Sizing Dies.
- Uses the same interchangeable bushings (.001 in. increments) as those used in our bushing style neck sizing dies.
- The adjustable decapping rod allows you to adjust the bushing position sizing only part of the neck length when desired.
- Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case.
- All Type S (except 17 and 20 Cal.) dies are supplied with both the standard size button and a decapping pin retainer for the advantages and versatility described under our Type S Bushing Style Neck Sizing Dies.
- Note: By removing the bushing and all internal parts the Type S full bushing may also be used as a body die
- All dies are supplied without bushings
- Uses the same interchangeable bushings (.001 in. increments) as those used in our bushing style neck sizing dies.
- The adjustable decapping rod allows you to adjust the bushing position sizing only part of the neck length when desired.
- Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case.
- All Type S (except 17 and 20 Cal.) dies are supplied with both the standard size button and a decapping pin retainer for the advantages and versatility described under our Type S Bushing Style Neck Sizing Dies.
- Note: By removing the bushing and all internal parts the Type S full bushing may also be used as a body die
- All dies are supplied without bushings
The Type S – Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.
Set contains:
The Type S – Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.
Set contains:
The Type S – Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.
Set contains:
The Type S – Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.
Set contains:
The Type S – Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.
Set contains:
The Redding Type S Elite set is comprised of a Type S Bushing Full Die A Type S Bushing Neck Die and a Redding Competition Seating Die. All Type-S dies use an interchangeable bushing to control neck diameter and tension to an increment of 0.001″.
The Redding Type S Elite set is comprised of a Type S Bushing Full Die A Type S Bushing Neck Die and a Redding Competition Seating Die. All Type-S dies use an interchangeable bushing to control neck diameter and tension to an increment of 0.001".
The Redding Type S Elite set is comprised of a Type S Bushing Full Die A Type S Bushing Neck Die and a Redding Competition Seating Die. All Type-S dies use an interchangeable bushing to control neck diameter and tension to an increment of 0.001″.
The Redding Type S Elite set is comprised of a Type S Bushing Full Die A Type S Bushing Neck Die and a Redding Competition Seating Die. All Type-S dies use an interchangeable bushing to control neck diameter and tension to an increment of 0.001″.
The Redding Type S Elite set is comprised of a Type S Bushing Full Die A Type S Bushing Neck Die and a Redding Competition Seating Die. All Type-S dies use an interchangeable bushing to control neck diameter and tension to an increment of 0.001″.
The Redding Type S Elite set is comprised of a Type S Bushing Full Die A Type S Bushing Neck Die and a Redding Competition Seating Die. All Type-S dies use an interchangeable bushing to control neck diameter and tension to an increment of 0.001″.
Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The Nosler Type S Full Length Resizing Bushing Die accomplishes this task with the precision you would expect from Redding.
Note: By removing the bushing and all internal parts the Type-S full bushing die may also be used as a body die.
All dies are supplied without bushings.
Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The Nosler Type S Full Length Resizing Bushing Die accomplishes this task with the precision you would expect from Redding.
Note: By removing the bushing and all internal parts the Type-S full bushing die may also be used as a body die.
All dies are supplied without bushings.
Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The new Type S Full Length Resizing/Bushing Die accomplishes this task with the precision you would expect from Redding.
Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The new Type S Full Length Resizing/Bushing Die accomplishes this task with the precision you would expect from Redding.
The Redding Reloading Type S-Match Neck Die Set was developed to be an incredible device for all of your reloading die specifications. Reloading spent cartridges can be quite a fun approach to saving income and the Redding Reloading Type S-Match Neck Die Set is one of the best products available to aid you in preparing perfect cartridges. These Reloading Dies through the industry professionals at Redding Reloading are created utilizing the types of durable and dependable components that they're recognized for.