Introducing the AUS Mount for 34mm diameter magnified optics from Reptilia. Driven by the request of an end user group the AUS Mount is the culmination of a 2 year development program. Like their DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile streamline design. Also like our DOT Mount line the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III Class 2 hard anodize coating.
The AUS is compatible with all of our existing 30mm ROF line and will be compatible with several new ROF products launching over the coming months.
Like all Reptilia products the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.
- Machined from billet 7075-T6 aluminum
- MIL-STD Type III hardcoat anodized
- 158 grams
- 34mm diameter bore
- 39mm (1.54 inch) bore height
- Up to 77mm objective will clear flat-top Picatinny
- Made in USA
Introducing the AUS Mount for 34mm diameter magnified optics from Reptilia. Driven by the request of an end user group the AUS Mount is the culmination of a 2 year development program. Like their DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile streamline design. Also like our DOT Mount line the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III Class 2 hard anodize coating.
The AUS is compatible with all of our existing 30mm ROF line and will be compatible with several new ROF products launching over the coming months.
Like all Reptilia products the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.
- Machined from billet 7075-T6 aluminum
- MIL-STD Type III hardcoat anodized
- 158 grams
- 34mm diameter bore
- 39mm (1.54 inch) bore height
- Up to 77mm objective will clear flat-top Picatinny
- Made in USA
Introducing the AUS Mount for 30mm diameter magnified optics from Reptilia. Driven by the request of an end user group the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile streamline design. Also like our DOT Mount line the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III Class 2 hard anodize coating.
The AUS is compatible with all of our existing 30mm ROF line and will be compatible with several new ROF products launching over the coming months.
Like all Reptilia products the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.
- Machined from billet 7075-T6 aluminum
- MIL-STD Type III hardcoat anodized
- 158 grams
- 30mm diameter bore
- 39mm (1.54 inch) bore height
- Up to 77mm objective will clear flat-top Picatinny
- Made in USA
The 1.70 inch bore height AUS Mount for 34mm diameter magnified optics from Reptilia is driven by the request of an end user group the AUS Mount is the culmination of a 2 year development program. Like their DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via their anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with a T-25 Torx or a flat blade driver to sit flush with the body of the mount for a low-profile streamline design. Also like Reptilia's DOT Mount line the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III Class 2 hard anodize coating.
The AUS is compatible with all of Reptilia's existing 34mm ROF line.
Like all Reptilia products the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.
- Machined from billet 7075-T6 aluminum
- MIL-STD Type III hardcoat anodized
- 165 grams
- 34mm diameter bore
- 43.2mm (1.70 inch) bore height
- Up to 86mm objective will clear flat-top Picatinny
- Made in USA
Reptilia’s DOT Mount is billet-machined from 7075-T6 aluminum and pairs a spring-loaded steel clamp with Picatinny rail compatibility. Its low-profile design sits flush without snags, and like all Reptilia products, it backs up with a lifetime warranty.
Specs
- Fits: Aimpoint Micro, Micro R-1, H-1, H-2, T-1, T-2, CompM5, Sig ROMEO4/5
- Height: 39mm (Lower 1/3 co-witness)
- Material: Billet 7075-T6 aluminum
- Finish: Milspec Type III hard anodized
- Mount: Picatinny 1913 rails
- Features: Spring-loaded nitrided steel clamp, low-profile anti-snag design
- Warranty: Lifetime
- Made in USA: Yes
Questions about fitment or availability? Give the shop a call and we’ll walk you through it.
The 1.93 inch height DOT Mount for HOLOSUN AEMS by Reptilia is a lightweight slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process and sit flush with the body of the mount for a low-profile anti-snag design.
Like all Reptilia products the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.
Compatible with: Holosun – AEMS
Features:
- Type III hardcoat anodized 7075 aluminum
- Nitrided 4140 steel Hardware
- 60 grams
- Made in USA
The DOT Mount by Reptilia is a lightweight slim-line mounting solution for a variety of red dot optics.
Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish the DOT Mount attaches to any M1913 Picatinny rail and offers lower 1/3 co-witness with standard AR15-style back-up sights. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process and sit flush with the body of the mount for a low-profile anti-snag design.
Like all Reptilia products the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.
- Type III hardcoat anodized 7075-T6 aluminum
- Nitrided 4140 steel
- 43 grams
- Made in USA
- Includes mounting screws and hex L-key
Reptilia's Low Profile M-LOK Rail is driven by an end user request for a solution to mount an aiming laser as close to a M-LOK handguard as possible. Getting the aiming laser closer to the bore axis reduces offset and also reduces snag hazard of the laser on the side of the handguard. The LPR is machined from billet 7075-T6 Aluminum and finished with Milspec Type III Hard Coat Anodize and FNC (Nitride) coated M-LOK hardware.
Like all Reptilia products the LPR Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.
Reptilia's Low Profile M-LOK Rail is driven by an end user request for a solution to mount an aiming laser as close to a M-LOK handguard as possible. Getting the aiming laser closer to the bore axis reduces offset and also reduces snag hazard of the laser on the side of the handguard. The LPR is machined from billet 7075-T6 Aluminum and finished with Milspec Type III Hard Coat Anodize and FNC (Nitride) coated M-LOK hardware.
Like all Reptilia products the LPR Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.
The RMU Mount by Reptilia is a lightweight slim-line solution manufactured at the request of a DoD customer. The RMU Mounts are ideal for lifting a variety of optics with fixed height lower 1/3 co-witness heights such as the EOTech line of holographic optics Vortex Optics AMG UH-1 and Sig Optics ROMEO8T to an elevated height which is more ergonomic when using helmet-borne night vision or those who prefer a more upright shooting stance.
The RMU Mount is machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish the RMU Mount attaches to any M1913 Picatinny rail and offers optimal sight placement with an increase in height of .625 inches. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process and sit flush with the body of the mount for a low-profile anti-snag design.
Available in 12 9 and 6 slot configurations in a black anodized finish today!
- Machined from billet 7075-T6 aluminum
- Milspec Type III hard anodized finish
- 109 grams
- Made in USA
The RMU Mount by Reptilia is a lightweight slim-line solution manufactured at the request of a DoD customer. The RMU Mounts are ideal for lifting a variety of optics with fixed height lower 1/3 co-witness heights such as the EOTech line of holographic optics Vortex Optics AMG UH-1 and Sig Optics ROMEO8T to an elevated height which is more ergonomic when using helmet-borne night vision or those who prefer a more upright shooting stance.
The RMU Mount is machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish the RMU Mount attaches to any M1913 Picatinny rail and offers optimal sight placement with an increase in height of .625 inches. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process and sit flush with the body of the mount for a low-profile anti-snag design.
Available in 12 9 and 6 slot configurations in a black anodized finish today!
- Machined from billet 7075-T6 aluminum
- Milspec Type III hard anodized finish
- 77.7 grams
- Made in USA
The RMU Mount by Reptilia is a lightweight slim-line solution manufactured at the request of a DoD customer. The RMU Mounts are ideal for lifting a variety of optics with fixed height lower 1/3 co-witness heights such as the EOTech line of holographic optics Vortex Optics AMG UH-1 and Sig Optics ROMEO8T to an elevated height which is more ergonomic when using helmet-borne night vision or those who prefer a more upright shooting stance.
The RMU Mount is machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish the RMU Mount attaches to any M1913 Picatinny rail and offers optimal sight placement with an increase in height of .625 inches. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process and sit flush with the body of the mount for a low-profile anti-snag design.
Available in 12 9 and 6 slot configurations in a black anodized finish today!
- Machined from billet 7075-T6 aluminum
- Milspec Type III hard anodized finish
- 95 grams
- Made in USA
The RMU Mount for Magnifiers by Reptilia is a lightweight slim-line solution manufactured at the request of a user group. The RMU Mount for Magnifiers lifts 3x and 6x magnifiers 0.39″ in their original mounts (typically 39mm/1.54” height) to alight with a 1.93” height mounted red dot optic such as our DOT Mount for Micros. It could also be used for BUIS or other optic configurations to lift them up.
The RMU Mount for Magnifiers is machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish the RMU Mount attaches to any M1913 Picatinny rail and offers optimal sight placement with an increase in height of .39 inches. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process and sit flush with the body of the mount for a low-profile anti-snag design.
Available in black and FDE anodized finish today!
- Machined from billet 7075-T6 aluminum
- Milspec Type III hard anodized finish
- 51 grams
- Made in USA