SilencerCo's pistons were designed to be easily changed for different host firearms or calibers. Pistons are built with 17-4 stainless steel then heat-treated for maximum durability. The piston is part of the Nielson device that moves and allows semi-automatic cycling for unlocking pistol barrels. Throw a Fixed Barrel Spacer on for fixed barrel applications. SilencerCo pistons have female threading that attaches to their SilencerCo threaded barrels.
Compatible with
- Omega K Series
- Hybrid 46
- Hybrid 46M with Charlie Piston Mount
- Osprey Series
- Octane Series
- Omega 36M with Charlie Piston Mount
These pistons were designed to be easily changed for different host firearms or calibers. Pistons are built with 174 stainless steel then heat-treated for maximum durability. The piston is part of the Nielson device that moves and allows semi-automatic cycling for unlocking pistol barrels. Throw a Fixed Barrel Spacer on for fixed barrel applications. SilencerCo pistons have female threading that attaches to their SilencerCo threaded barrels.
XL pistons are for firearms where the silencer requires additional length between the threaded barrel and the silencer.
Compatible with
- Omega K Series
- Hybrid 46
- Hybrid 46M
- Osprey Series
- Octane Series
- Omega 36M
The Switchback 22 is the best performing rimfire suppressor on the market. Modular, lightweight, with unmatched sound reduction, it provides three distinct lengths and is compatible with .22 LR, .22 WMR, .22 Hornet, .17 HMR, .17 WSM, and 5.7x28mm.. The Switchback 22 is constructed of two titanium tubes, which interface through the use of a connecting stainless steel baffle. It features stainless steel baffles internally, which utilize SilencerCos Click Together Assembly (CTA) design. The design and combination of high strength materials ensure its longevity and durability even under hard use or full-auto rates of fire for its designated calibers.
The Hybrid 46M is a light, compact, modular centerfire rifle suppressor, with the versatility to use on magnum rifles, pistols, and subguns. The Hybrid 46M is rated for all centerfire pistol and rifle calibers including 45 Auto, 10MM, .450 Bushmaster, .458 SOCOM, .45-70, .338 LM and up to .460 Weatherby Magnum. This suppressor ships with Charlie ASR Mount, (2) Charlie Basic Tools, Charlie Multitool, and manual. Muzzle Average: 128.90 dB and up.
The Osprey 2.0 was designed to be used wet or dry. Shooting wet temporarily improves sound suppression by inserting a small amount of ablative media. This can be done by inserting about 5ccs (or a typical water bottle cap full) of clean water or clear wire pulling gel into the back of the silencer. The Ospreys unique shape make it the only multi-caliber polygonal pistol silencer on the market. The monocore baffle design in a polygonal package allows for greater internal volume and therefore better sound performance. The Osprey utilizes a push button locking system for quick indexing. This system allows the majority of the suppressor to sit below the shooters line of sight, therby not impeding standard pistol sights.
The Sparrow 22 was designed with simplicity, durability, and user serviceability as its core objectives. Patented Multi-Part Containment (MPC) technology facilitates ease of disassembly and reassembly an essential function of rimfire suppressor. The internal MPC construction uses two half tubes that pull away from a monolithic core, which ensures that the Sparrow 22 will remain easy to clean after extended periods of use with notoriously dirty rimfire ammunition.
SilencerCo pistons were designed to be easily changed for different host firearms or calibers. Pistons are built with 174 stainless steel then heat-treated for maximum durability. The piston is part of the Nielson device that moves and allows semi-automatic cycling for unlocking pistol barrels. Throw a Fixed Barrel Spacer on for fixed barrel applications. SilencerCo pistons have female threading that attaches to SilencerCo threaded barrels.
XL pistons are for firearms where the silencer requires additional length between the threaded barrel and the silencer.
Compatible with
- Omega K Series
- Hybrid 46
- Hybrid 46M
- Osprey Series
- Octane Series
- Omega 36M
When transporting your firearm or waiting on ATF approval keep your threads crisp and protected with a thread protector. Careful not to cross-thread simply twist the thread protector on the end of your barrel to prevent dust and debris from clogging your threads when no silencer is in use.
Available in .578 X 28 and 1/2 X 28
.578 X 28 is compatible with most US-made 45ACP
When transporting your firearm or waiting on ATF approval keep your threads crisp and protected with a thread protector. Careful not to cross-thread simply twist the thread protector on the end of your barrel to prevent dust and debris from clogging your threads when no silencer is in use.
Available in .578 X 28 and 1/2 X 28
1/2 X 28 is compatible with most US-made 9mm
SilencerCo. is a leading manufacturer in noise reduction devices and accessories. Suppressor technology has gained popularity in the US and SilencerCo is blazing a trail. This particular item allows you to protect the thread pitch on your barrel when your suppressor is not in use. The thread protector is made from Stainless Steel and features a Black Oxide finish.
All pistol suppressors require a threaded pistol barrel. SilencerCo noticed a market need for high quality pistol barrels and we stepped in to offer them. Holding to the same commitment to quality as all of our products the threaded barrels are tough enough to hold up under the harshest conditions. Made of 416R stainless steel and finished in black nitride (some models remain stainless). For use with a pistol silencer you will also need a piston*
SilencerCo threaded barrels come with a Thread Protector.
BERETTA 92FS/M9 — 1/2″–28 (AC2291) | 5.3″ length
All pistol suppressors require a threaded pistol barrel. SilencerCo noticed a market need for high quality pistol barrels and stepped in to offer them. Holding to the same commitment to quality as all of their products the threaded barrels are tough enough to hold up under the harshest conditions. Made of 416R stainless steel and finished in black nitride (some models remain stainless). For use with a pistol silencer you will also need a piston.
All pistol suppressors require a threaded pistol barrel. SilencerCo noticed a market need for high quality pistol barrels and stepped in to offer them. Holding to the same commitment to quality as all of their products the threaded barrels are tough enough to hold up under the harshest conditions. Made of 416R stainless steel and finished in black nitride (some models remain stainless). For use with a pistol silencer you will also need a piston.
All pistol suppressors require a threaded pistol barrel. SilencerCo noticed a market need for high quality pistol barrels and we stepped in to offer them. Holding to the same commitment to quality as all of our products the threaded barrels are tough enough to hold up under the harshest conditions. Made of 416R stainless steel and finished in black nitride (some models remain stainless). For use with a pistol silencer you will also need a piston.
SilencerCo threaded barrels come with a Thread Protector.
GLOCK 21 — 45ACP .578″–28 (AC863) | 5.2″ length
All pistol suppressors require a threaded pistol barrel. SilencerCo noticed a market need for high quality pistol barrels and we stepped in to offer them. Holding to the same commitment to quality as all of our products the threaded barrels are tough enough to hold up under the harshest conditions. Made of 416R stainless steel and finished in black nitride (some models remain stainless). For use with a pistol silencer you will also need a piston.
SilencerCo threaded barrels come with a Thread Protector.
GLOCK 22 (Gen 2-4) — 40S&W 9/16″–24 (AC50) | 4.8″ length
All pistol suppressors require a threaded pistol barrel. SilencerCo noticed a market need for high quality pistol barrels and we stepped in to offer them. Holding to the same commitment to quality as all of our products the threaded barrels are tough enough to hold up under the harshest conditions. Made of 416R stainless steel and finished in black nitride (some models remain stainless). For use with a pistol silencer you will also need a piston.
SilencerCo threaded barrels come with a Thread Protector.
Gen 1-4 (not Gen 5)
The Glock 43 compatible threaded barrel from Silencer Co is a 3.39 inch replacement barrel made from 416R stainless steel. This barrel features a black finish along with a 1/2" x 28 RH thread pattern.
All pistol suppressors require a threaded pistol barrel. SilencerCo noticed a market need for high quality pistol barrels and we stepped in to offer them. Holding to the same commitment to quality as all of our products the threaded barrels are tough enough to hold up under the harshest conditions. Made of 416R stainless steel and finished in black nitride (some models remain stainless). For use with a pistol silencer you will also need a piston.
SilencerCo threaded barrels come with a Thread Protector.
H&K VP9 — 9MM 1/2″–28 (AC1549) | 4.5″ length
All pistol suppressors require a threaded pistol barrel. SilencerCo noticed a market need for high quality pistol barrels and we stepped in to offer them. Holding to the same commitment to quality as all of our products the threaded barrels are tough enough to hold up under the harshest conditions. Made of 416R stainless steel and finished in black nitride (some models remain stainless). For use with a pistol silencer you will also need a piston.
SilencerCo threaded barrels come with a Thread Protector.
S&W M&P — 45ACP .578″–28 (AC2024) | 5.1″ length
All pistol suppressors require a threaded pistol barrel. SilencerCo noticed a market need for high quality pistol barrels and we stepped in to offer them. Holding to the same commitment to quality as all of our products the threaded barrels are tough enough to hold up under the harshest conditions. Made of 416R stainless steel and finished in black nitride (some models remain stainless). For use with a pistol silencer you will also need a piston.
SilencerCo threaded barrels come with a Thread Protector.
S&W M&P — 9MM 1/2″–28 (AC2023) | 4.9″ length
All pistol suppressors require a threaded pistol barrel. SilencerCo noticed a market need for high quality pistol barrels and we stepped in to offer them. Holding to the same commitment to quality as all of our products the threaded barrels are tough enough to hold up under the harshest conditions. Made of 416R stainless steel and finished in black nitride (some models remain stainless). For use with a pistol silencer you will also need a piston.
SilencerCo threaded barrels come with a Thread Protector.
S&W M&P SHIELD — 9MM 1/2″–28 (AC2290) | 3.5″ length
All pistol suppressors require a threaded pistol barrel. SilencerCo noticed a market need for high quality pistol barrels and we stepped in to offer them. Holding to the same commitment to quality as all of our products the threaded barrels are tough enough to hold up under the harshest conditions. Made of 416R stainless steel and finished in black nitride (some models remain stainless). For use with a pistol silencer you will also need a piston.
SilencerCo threaded barrels come with a Thread Protector.