The Spike’s Tactical LPK exceeds Military Specifications by a long shot while also offering a much better fit and finish. Proudly 100% made right here in the USA. (This Kit Does Not Include Trigger Group)

The Spike’s Tactical LW BAR2 Handguard is a one-piece free floating quad-rail that is machined from 6061-T6 aluminum and finished in a type III hardcoat anodizing. The main benefit of the BAR rail is to those who wish to have a suppressor inside of the rail. The BAR rail also offers excellent heat ventilation and built in anti-rotation tabs to keep the rail and barrel nut from coming loose. Includes 3 ladder rail panels and mounting hardware.

Your Bolt Carrier Group is one of the most critical parts of your build. Don’t buy an imitation. This is the Spike’s Tactical Lightweight BCG with Nickel Boron Coating.

The Spike’s Tactical M4 Complete Stock Assembly comes with everything you need to finish off the back end of your AR-15 lower receiver with top notch parts. This kit comes with a 6 position Mil-Spec Buffer Tube, M4 Collapsible Buttstock, Receiver End Plate, Castle Nut, Buffer Spring, and ST-T2 Heavy Carbine Buffer.

High quality low-profile AR-15 double set screw gas block. Made of Billet Steel and Black Nitride Coated.

Recoil? What recoil? This brake has extremely large side ports for diverting the gas followed by the projectile outwards for excellent recoil management. If taming the beast is what you want then look no further!

New folding rear sight. Low profile when folded down. Lock when raised. Push the lever to lower the sight. Tool-less windage adjustment. Flipping diopter.

Spike’s Tactical stainless steel heavy buffer for use in a carbine stock. The ST-9X is a dedicated 9mm buffer due to its extended length. Its extended length helps eliminate the problem of breaking bolt catches. The buffer will smooth the gun out, make it more reliable and decrease the amount of gas in your face when shooting suppressed.

The Spike’s Tactical Billet Trigger Guard Gen II is a drop in replacement trigger guard that’s styled after the Spike’s billet lower trigger guard. The extra room that this billet trigger guard provides is excellent when using shooting gloves or even cold weather gloves. It also fills that annoying gap in between the standard trigger guard and the front of the grip. The front of the trigger guard has a spring loaded detent much like a mil-spec trigger guard. The rear uses a solid cross pin with a groove machined in the center. A captured spring in the trigger guard itself makes installation as easy as aligning and inserting the pin. A rubber bumper built into the trigger guard eliminates any rattling.

The Spike’s Tactical Laser Engraved Ejection Port Doors are an easy and inexpensive way to personalize your AR-15. With so many choices available, it will take you longer to choose than it will to install. It is a Mil-Spec ejection port door constructed from stamped steel and it has a Mil-Spec phosphate coating. It comes with a laser-engraved “Made is USA” on one side and American Flag.

The Spike’s Tactical Ejection Port Door is an easy and inexpensive way to personalize your AR-15. It is a Mil-Spec ejection port door constructed from stamped steel and it has a Mil-Spec phosphate coating. This model features a laser-engraved Pirate.

The Spike’s Tactical Ejection Port Door is an easy and inexpensive way to personalize your AR-15. It is a Mil-Spec ejection port door constructed from stamped steel and it has a

Spike’s Tactical M4 flat top upper receiver is the same high quality M4 Mil-Spec upper used on their factory builds. This forged upper is constructed of 7075 T6 aluminum with a durable Type III Hardcoat Anodized finish. It includes the forward assist, and ejection port door, spring, and rod. This stripped upper weighs 8.5 oz. NOTE: Requires charging handle, barrel, handguard, gas block, muzzle device, gas tube and BCG (Bolt Carrier Group) to complete.

The ST-T1 buffer provides a firmer recoil impulse and is intended for machine guns, suppressed weapons and rifles that suffer from overgassing. It doesn’t have any fluids to leak out like some other buffers, so it’s maintenance free. The ST-T1 buffer weighs in at 85g/3oz and the body is CNC machined from solid billet Aluminum bar stock for strength and durability. Laser engraved with the Spike’s Tactical Logo. Each ST-T1 buffer contains three sliding solid weights cut from tungsten bar stock and topped off with a Mil-Spec bumper. The ST-T1 eliminates the chance of bolt bounce, helps with muzzle rise when firing in full-auto, and cuts down on felt recoil. It’s designed for .223/5.56 but it works in all calibers.

The Spike’s Tactical Pistol Buffer Tube is machined from Mil-Spec 7075-T6 aluminum which is one of the strongest yet lightest type of aluminum commercially available. The pistol tube also has a QD socket at the end of it.

Spike’s Tactical Mil-Spec 6-Position buffer tube with dry film lube is machined from 7075-T6 aluminum. This model has a black hardcoat anodzied finish.

The Spike’s Tactical Carbine Buffer Spring is a Mil-Spec 17-7 stainless steel buffer spring that features an electro polish finish to give it a smoother quality look and feel.

Spike’s Tactical stripped lowers is made to the highest standards. Forged from 7075 T6 aluminum, it supports multi-calibers, black hard coat anodized finish, is low shelf and RDIAS compatible. This model has a Punisher logo. NOTE: Requires a lower parts kit, buffer & stock of your choosing to complete.

Spike’s Tactical stripped lower is made to the highest standards. Forged from 7075 T6 aluminum, it supports multi-calibers, black hard coat anodized finish, is low shelf, and RDIAS compatible. This model has a Calico Jack logo. NOTE: Requires a lower parts kit, buffer & stock of your choosing to complete.

Spike’s Tactical lowers are American-made to the highest standards. The 7075 T6 forged aluminum has a MIL-A-8625F Type III Class 2 Hard Coat Anodized finish. This stripped lower is multi-caliber, and low shelf, RDIAS compatible. The Spider model features the ST Spider Logo predominantly on the left side of the magwell. The Spider model is the standard lower on all ST-15 LE rifles. The selector markings on this Spider model are bullet pictograms. It has a black finish. NOTE: Requires a lower parts kit, buffer & stock of your choosing to complete.