Spike’s Tactical stripped lower is made to the highest standards. It is forged from 7075 T6 aluminum it supports multi-calibers, a black hard coat anodized finish, low shelf and is RDIAS compatible. This model has a PHU Joker logo. NOTE: Requires a lower parts kit, buffer & stock of your choosing to complete.

Spike’s Tactical stripped lower is made to the highest standards. Forged from 7075 T6 aluminum it supports multi-calibers, has a black hard coat anodized finish, low shelf, and is RDIAS compatible. This model features a PHU Joker logo with a spade. NOTE: Requires a lower parts kit, buffer & stock of your choosing to complete.

Spike’s Snowflake multi-caliber stripped lower is made to the highest standards. It is constructed of 7075-T6 forged aluminum with a black hard coat anodized finish. This lower has a low shelf, safe space, trigger, and full libturd selector markings. It is also RDIAS compatible. NOTE: Requires a lower parts kit, buffer & stock of your choosing to complete.

Spike’s Tactical ST-15 LE M4 Carbine Rifle is designed for law enforcement. The chrome moly vanadium barrel is chrome lined, threaded, has an A2 flash hider, and is Mil-Spec phosphate coating. The 7075-T6 lower features proprietary low shelf, RDIAS compatibility, and has a hard coat anodized finish. Its proprietary gas tube has a black nitride finish both inside and out, while the charging handle has a Mil-Spec type three coating. The Spikes Tactical M4 stock features 6-position mil-spec buffer tube and a Spikes pro grip. The ST-15 LE M4 Carbine also has a jeweled mil-spec trigger, A2 front with a Magpul MBUS rear sights, and sling swivel. It includes a hard case. This model has a 16″ barrel and a 12″ BAR2 rail. It comes with a magazine.

The Spike’s Tactical ST-15 LE upper line-up is designed as a fully Mil-spec compliant upper series for law enforcement. This same level of quality and performance is now available to everyone, all at a price range that is affordable to shooters of any budget. Each component is manufactured to Mil-spec standards. This model features Spike’s Tactical 16″ with 1:7 Twist Mil-spec Barrel, M4 Barrel Profile, Carbine Length Gas System, ST Micro Gas Block, .750″ Diameter Gas Seat, Spike’s Tactical Mil-Spec M16 Bolt Carrier Group, ST BAR rail system, and A2 Flash Hider.

The Spike’s Tactical ST-15 Enhanced upper line-up is designed as a fully Mil-spec compliant upper series for law enforcement. This same level of quality and performance is now available to everyone, all at a price range that is affordable to shooters of any budget. Each component is manufactured to Mil-spec standards. This model features 16″ with 1:7 Twist cold hammer forged Mil-spec Barrel, ST Optimum Profile, Mid Length Gas System, F-Marked A2 front sight base, .750″ Diameter Gas Seat, Spike’s Tactical Mil-Spec M16 Bolt Carrier Group, mid length handguards, and A2 flash hider.

The Spike’s Tactical ST-15 Enhanced upper line-up is designed as a fully Mil-spec compliant upper series for law enforcement. This same level of quality and performance is now available to everyone, all at a price range that is affordable to shooters of any budget. Each component is manufactured to Mil-spec standards. This model features 16″ with 1:7 Twist cold hammer forged Mil-spec Barrel, ST Optimum Profile, Mid Length Gas System, ST Micro Gas Block, .750″ Diameter Gas Seat, Spike’s Tactical Mil-Spec M16 Bolt Carrier Group, ST BAR2 12″ Rail, and A2 flash hider.

Spike’s Tactical has produced what they believe is the best gas tube out on the market for the AR-15 rifle. The gas tube is made out of Mil-Spec 304 stainless steel with a Melonite coating for greater corrosion resistance, and lower reflection. Included is a split roll pin.

Improve your rifle build with this Spikes Tactical 5.56 LE Midlength 16in Forged Upper Receiver that’s inspected and ready to function right out of the box. Spikes Tactical crafted these AR15 Upper Receivers from 7075 T6 aluminum to add an element of toughness to your build without the added weight of heavy steel. The Spikes Tactical 5.56 LE Midlength 16in Drop-In Upper comes with everything you need to complete your upper build, including a phosphate-coated bolt carrier group that resists corrosion to provide countless years of service. Bring some serious function and power to your build by installing this Spikes Tactical 5.56 LE Midlength 16in Complete Upper Assembly.image

The Barking Spider is designed to redirect the noise, blast, and concussion forward away from the shooter (down range). It was specifically designed to handle full auto and high volume fire. The Barking Spider features a cutting edge blast cone design which is supported in both the front AND the rear. This feature not found on any other Krinkov muzzle brake eliminates the cone from sagging in extremely high temperatures. It is CNC machined from Billet 4140 Chromoly BAR stock. It’s ball dimpled to reduce weight and to help dissipate heat. The body comes pre-drilled for pinning to the barrel. The body is the correct length to make a 14.5″ barrel into 16″ OAL when perm attached. The body is heat treated and features an extremely durable Black Nitride QPQ finish. It includes a thread protector which covers the teeth on the striking device when it’s not in use. It also includes a 5 prong Helix flash suppressor cap which greatly reduces the flash being thrown down range. The Modular design allows you to change configurations around in seconds by simply unscrewing the attachment and screwing on a different one.

The Spike’s Tactical Dynacomp is a muzzle device designed to reduce recoil impulse and muzzle climb to provide faster follow up shots. The Dynacomp accomplishes this by balancing the direction of the blast along the vertical (upward) and perpendicular planes of the muzzle to lower muzzle rise, while the end of the device restricts forward energy to reduce parallel recoil. The ports on the Dynacomp are ball dimpled for smooth expansion of gases and rapid heat dissipation. The front of the device is 0.25″ thick to better handle the abuse of full auto fire. This model is for 5.56 rifles and is threaded for 1/2″x28 barrels. It is machined from 303 Stainless Steel and features a black Melonite finish. It comes with the crush washer needed for installation.

The Spike’s Tactical Dynacomp is a muzzle device designed to reduce recoil impulse and muzzle climb to provide faster follow up shots. The Dynacomp accomplishes this by balancing the direction of the blast along the vertical (upward) and perpendicular planes of the muzzle to lower muzzle rise, while the end of the device restricts forward energy to reduce parallel recoil. The ports on the Dynacomp are ball dimpled for smooth expansion of gases and rapid heat dissipation. The front of the device is 0.25″ thick to better handle the abuse of full auto fire. This model is for .308 rifles and is threaded for 5/8″x24 barrels. It is machined from 303 Stainless Steel and features a black Melonite finish. It comes with the crush washer needed for installation.

Spikes Muzzle Brake in 5.56 NATO is designed to fit 1/2 x 28″ thread barrels and reduce recoil and muzzle climb and help provide faster follow up shots.

Spike’s Standard Lower Parts Kit exceeds military specifications by a long shot while also offering a much better fit and finish. It includes: rounded hammer (works with all calibers), hammer spring, trigger, trigger spring, disconnector, disconnector spring, safety selector, detent, selector spring, bolt catch, bolt spring, roll pin, plunger, magazine catch, catch spring, catch button, front pivot pin, rear takedown pin, aluminum trigger guard with spring loaded detent and roll pin, buffer retainer spring and plunger, A2 Pistol grip, 1/4×28″ hex screw, star lock washer, and stainless steel hammer and trigger pin with black oxide finish. Made in the USA.

Spike’s Enhanced LPK was designed for the end user who demands the most longevity possible out of the parts in their rifles. The core of the Spike’s Enhanced LPK is the ST Battle Trigger which is a single stage Mil-Spec trigger, rounded hammer and disconnector that is Nickel Boron-plated for a very smooth and crisp trigger pull. The Battle Trigger is held in place via KNS Gen II Mod II Anti-Rotation pins which keep the hammer and trigger pins from walking out and keeps the pin holes from enlarging and “egg-holing” after years and years of use. Spike’s also included an ambidextrous safety selector, ST Billet Trigger guard with set screw and Ergo grip featuring Spike’s Spider logo. The Spike’s Enhanced LPK also features a Mil-Spec bolt catch, mag catch and mag catch button. As well as utilizing Mil-Spec detents, plungers, pins and springs. The is kit also includes quality spiral roll pins for the trigger guard and bolt catch, as well as a 1/4″ allen screw and washer for the Ergo grip. Made in the USA.

SPIKES TACTICAL STRIPPED LOWER RECEIVER MULTI CAL SPARTAN LOGO

SPIKES TACTICAL STRIPPED LOWER RECEIVER MULTI CAL, CRUSADER LOGO