The Mini Infrared Scout Light® Pro is a 3-volt model in Surefire's line of multi-spectrum Scout Lights. Powered by a single 123A lithium battery it produces 250 lumens of brilliant white light or 100 mW of invisible infrared illumination for use with night vision devices — with no need for IR filters or spare lamps. It features SureFire’s new Low-Profile Mount (LPM). which delivers unprecedented versatility by allowing the user to optimize the light’s position relative to the rail. Rugged and reliable the LPM easily and securely attaches to any MIL-STD-1913 or M-LOK rail. To switch between white light disable and infrared modes you simply twist the front knurled portion of the bezel. In either mode the Mini Infrared Scout Light Pro's TIR lens produces a tight beam suited for close- to medium-range applications. Constructed of high-strength aerospace aluminum with Mil-Spec hard anodizing for superior toughness and corrosion resistance it’s built to withstand the rigors of combat and give you an unfair advantage.

Features:

Virtually indestructible IR and white LEDs are regulated to maximize light output and runtime
New Low-Profile Mount allows optimum light positioning; ideal for use with other rail-mounted accessories
On-the-fly switching between white-light and IR mode — no IR filter required
TIR lens shapes versatile beam with enough reach and surround light for medium- to longer-range operations
Mil-Spec hard-anodized aluminum body tempered window and O-ring seals make light rugged durable and combat ready
Activation via Z68 momentary/constant-on pushbutton switching with protective shroud
Includes mounting hardware for MIL-STD-1913 and M-LOK rails

SureFire ProComps take the standalone muzzle brake to the proverbial next level. The ProComp 556 fits M4/M16 weapons and variants with 1/2-28 muzzle threads while the SureFire ProComp 762 fits AR10/LR308 rifles and variants with 5/8-24 muzzle threads. Whichever you choose you can count on a muzzle brake that greatly reduces both recoil impulse and muzzle rise so that your weapon tracks straight back to keep you on target for faster shot-to-shot recovery. Surefire's proprietary Impulse Diffusion design minimizes side blast and rear-directed concussion effects or even greater accuracy. Every ProComp features blind pilot holes at the 9 o’clock position to enable fine-tuning of recoil traits for individual shooting styles or ammunition characteristics. All that is required is a basic hand drill and appropriate drill bits.

Features:

Offset porting greatly reduces recoil impulse and muzzle rise so the weapon tracks straight back to keep you on target for faster shot-to-shot recovery
Precision machined from U.S. mill-certified steel bar stock
High-precision barrel threads for optimum thread interface
Pilot hole located at 9 o’clock for tuning to suit individual shooting styles or ammunition characteristics
Pilot hole located at 6 o’clock for pin-and-weld applications
Black nitride coating provides maximum protection against harsh environmental conditions
ProComp 556 fits M4/M16 weapons and variants with 1/2-28 muzzle threads
ProComp-762-5/8-24 muzzle brake fits AR10/LR308 rifles and variants with 5/8-24 muzzle threads
Installation requires no permanent modifications for M4 / M16 / AR15-type weapons
Durable construction delivers a long service life
Proudly designed and manufactured in the U.S.A.
Note: SureFire ProComp muzzle brakes are stand-alone muzzle devices and do not serve as mounts/adapters for any SureFire Fast-Attach sound suppressors

SureFire Replacement Rear Cap Assembly for Scout Light Black

SureFire Replacement Rear Cap Assembly for Scout Light Tan

The UE07 provides reliable remote activation for any Scout Light WeaponLight. Tailcap module screws onto Scout Light body. Switch cable and connector are an integral unit that plugs into the tailcap socket; other cable lengths are available (see ST-series switches). A pressure-activated switch attaches to firearm via adhesive-backed Velcro pad. The UE07 also features a 7-inch cable that fits most rifle/carbine applications. The entire unit is O-ring sealed at both ends for superior weatherproofing.

Features:

Tape switch attaches with adhesive-backed Velcro
7-inch cable is standard; other cable lengths available
O-ring sealed weatherproof
Fits most SureFire Scout Light WeaponLights (not compatible w/ Micro Scout Light Pro)

Remote Switch Rifle Pressure Switch Assembly for XVL2 WeaponLight

Adapt And Overcome. With its recoil-proof ultra-high-output LED delivering 1000 lumens of blinding white light the Scout Light Pro is ready for action. Its proprietary TIR lens shapes the light into a far-reaching beam with ample surround light for exceptional peripheral vision making it ideal for medium to longer-range applications. SureFire’s new Low-Profile Mount (LPM) delivers unprecedented versatility allowing the user to optimize the light’s position relative to the rail. The LPM easily and securely attaches to any MIL-STD-1913 or M-LOK rail. The light is easily activated by either clicking its push-button tailcap switch or by pressing the pressure-activated tape switch on select models. Rugged and reliable the Scout Light Pro is constructed of lightweight aerospace aluminum with Mil-Spec Hard Anodized finish and O-ring sealed to keep out the elements. It is built to endure in combat without any sacrifice in weapon maneuverability.

Features:

Mounting hardware for MIL-STD-1913 and M-LOK rails is included
The Scout Light Pro for any threat level; 1000 lumens of tactical lighting power
New Low-Profile Mount allows optimum light positioning; ideal for use with other rail-mounted accessories
Virtually indestructible ultra-high-output LED generates 1000 lumens of blinding light; produces tactical-level light for 1.25 hours on two 123A batteries
Versatile Low-Profile Mount (LPM) allows the user to optimize the light’s position relative to the rail
TIR lens shapes versatile beam with enough reach and surround light for indoor/CQB and outdoor/medium-to-long-range operations
Mil-Spec hard-anodized aluminum body and tempered window make it light rugged durable and combat ready
Activation via Z68 momentary/constant-on push-button switching with protective shroud

SureFire 123A Lithium batteries are hands down the most stable efficient long lasting batteries on the market. With an extremely long burn time and shelf life after 10 years of storage these batteries still retain roughly 70 percent of their power which means they will be ready when you need them every time.

Always Be Prepared. Optimized for use in SureFire flashlights SureFire 123A high-performance lithium batteries pack a lot of power into a very small package. And unlike alkaline batteries SureFire batteries have a 10-year shelf life which means they will be ready when you need them every time. Trust in the power and durability of SureFire batteries.

The best 123A lithium batteries available bar none
123As outperform alkaline batteries
10-year shelf life — they're ready when you need them

Charge. Win. Repeat. The SF18350 is a Lithium Ion-protected 18350 battery with MICRO-USB charge capability. This allows the user to conveniently charge the battery using any USB power source such as a USB wall charger computer/laptop power bank or automotive USB port using the included MICRO-USB to USB cable. Note: The SF18350 is compatible with SureFire Dual Fuel single 123A-powered products. It is not compatible with non-Dual Fuel single 123A-powered products.

High-performance 3.7V 18350 lithium ion rechargeable battery with MICRO-USB port for ease of charging – no charging cradle needed
When plugged into a power source two LED indicators display the current charge state: Red for charging and Green for fully charged
1100 mAh for extended battery runtime
8-10A discharge rate for dependability in high drain devices such as LED flashlights

Always Be Prepared. Optimized for use in SureFire flashlights, SureFire 123A high-performance lithium batteries pack a lot of power into a very small package. And unlike alkaline batteries, SureFire batteries have a 10-year shelf life, which means they will be ready when you need them, every time. Trust in the power and durability of SureFire batteries.

Charge. Win. Repeat. The SFLFP123-KIT is the perfect solution for customers who prefer to use rechargeable 123A cells when powering SureFire illumination tools including WeaponLights and hands-free lights. While they lack the capacity of SureFire 123A lithium primary cells SFLFP123 cells are safe to use cost-effective and they retain approximately 80% of their original capacity even after hundreds of charging cycles. The included smart charger can fully charge two batteries in three hours in the convenience of your home office or vehicle. Note: Do not use rechargeable LFP 123A batteries with incandescent illumination tools.

SFLFP123 batteries are rechargeable and reusable saving you hundreds over 123A lithium primary batteries
SFLFP123 batteries are better for the environment because they contain no hazardous heavy metals
Includes two-bay charger for easy convenient recharging at home or on the go
Note: LFP rechargeable batteries have significantly less run time than their disposable counterparts
Every SFLFP123-KIT includes two Lithium Iron Phosphate (LiFePO4) 450mAh 3.2V rechargeable cells a two-bay battery charger and a MICRO-USB to USB-A cable
Smart internal circuitry automatically terminates charge cycle when cells are at full capacity
Safety design features provide protection from overcharge short-circuit and reverse polarity
Charge one or two SFLFP123 from 1.5 hours to 3 hours. Charge termination occurs at 3.65V typical
Restrictions: Rechargeable SFLFP123 batteries are only to be used to power LED illumination products and NOT those featuring incandescent lamps

Charge. Win. Repeat. The SFLFP123-KIT is the perfect solution for customers who prefer to use rechargeable 123A cells when powering SureFire illumination tools including WeaponLights and hands-free lights. While they lack the capacity of SureFire 123A lithium primary cells SFLFP123 cells are safe to use cost-effective and they retain approximately 80% of their original capacity even after hundreds of charging cycles. Note: Do not use rechargeable LFP 123A batteries with incandescent illumination tools.

SFLFP123 batteries are rechargeable and reusable saving you hundreds over 123A lithium primary batteries
SFLFP123 batteries are better for the environment because they contain no hazardous heavy metals
Includes two-bay charger for easy convenient recharging at home or on the go
Note: LFP rechargeable batteries have significantly less run time than their disposable counterparts
Every SFLFP123 battery set includes two Lithium Iron Phosphate rechargeable cells only (charger is not included)
Smart internal circuitry automatically terminates charge cycle when cells are at full capacity
Safety design features provide protection from overcharge short-circuit and reverse polarity
Charge one or two SFLFP123 from 1.5 hours to 3 hours. Charge termination occurs at 3.65V typical
Restrictions: Rechargeable SFLFP123 batteries are only to be used to power LED illumination products and NOT those featuring incandescent lamps

The advanced SureFire SFMB-338-3/4-24 muzzle brake, which fits 8.60 mm (.338 caliber) rifles with 3/4-24 muzzle threads, greatly reduces both recoil impulse and muzzle rise and features neutral porting that loads bi-pod legs evenly. Its patented Impulse Diffusion design minimizes side blast and rear-directed concussion effects. The SFMB-338-3/4-24 also serves as a rock-solid mounting adapter for .338 caliber SureFire SOCOM Series Fast-Attach suppressors.

SureFire’s advanced SF3P three-prong flash hiders deliver superior performance with a patented design that greatly reduces muzzle flash — typically more than 99%. Available for use with a variety of rifle calibers and muzzle thread specs they are precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated to resist erosion for consistent high performance. SF3P flash hiders feature robust tines built to withstand the rigors of combat and every SF3P is carefully inspected for concentricity and alignment ensuring a rock-solid mounting surface for SureFire SOCOM Series Fast-Attach® suppressors.

Features:

Patent-pending design provides more than a 99% reduction in flash
Multiple bearing surfaces provide superior suppressor alignment and prevent ringing of tines inside suppressor
Made from U.S. mill-certified heat-treated stainless steel that is highly resistant to corrosion and gas/particle erosion
High-precision single-point cut barrel threads create optimum thread interface
Inspected for all critical dimensions including concentricity and alignment
DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use
Serves as rock-solid mounting adapter for SureFire SOCOM Series sound suppressors
Labyrinth seals mitigate gas leak from suppressor lock ring
Installation requires no permanent modifications to most weapons
Mounts all SureFire SOCOM Series sound suppressors
Note: SureFire SOCOM Series Fast-Attach sound suppressors flash hider/suppressor adapters and muzzle brake/suppressor adapters are not compatible with previous SureFire Fast-Attach sound suppressors muzzle brakes or flash hiders

This flash hider for 5.56 mm weapon platforms is the exact flash hider that SureFire developed to dominate the most rigorous suppressor trial in military history and earn the USSOCOM suppressor contract. Its four-tine design significantly reduces muzzle flash — typically greater than 99% compared to a bare muzzle — delivering extreme signature reduction and rugged dependability. With multiple bearing surfaces that ensure proper suppressor alignment this flash hider serves as a rock-solid mounting platform for any SureFire SOCOM Fast-Attach® suppressor. Precision-machined from U.S. mill-certified stainless-steel bar stock and heat-treated for added strength it is highly resistant to gas and particle erosion so you can depend on it to provide years of faithful service. SureFire flash hiders are individually inspected to ensure concentricity and alignment and covered by SureFire’s No-Hassle Guarantee.

Features:

Improved version of the US Special Operations Command suppressor trial-winning SOCOM556-RC
Features the finest engineering and materials for unsurpassed performance and reliability
6.4-inch overall length optimized for superior signature reduction
Designed specifically for 10-inch and longer M4/M16-variant rifles and carbines
Eliminates first-round flash a phenomenon common in most suppressors
Suppresses visible flash up to 99.3% over a bare muzzle
Tight tolerances and precision bore concentricity result in superior accuracy
Durable high-temperature Inconel alloy/stainless-steel construction withstands full-auto use
Cutting-edge internal venting reduces back pressure cyclic rate and gas blowback to significantly reduce operating temperatures
Compatible with the SureFire array of Fast-Attach® mounting adapters (flash hiders Muzzle brakes and WARCOMPS)
Fast-Attach® design allows fast secure easy attachment and removal without tools
All SOCOM556-RC2 suppressors are test-fired to verify sub-1 MOA group size and point-of-impact shift
Durable construction delivers long service life
Proudly designed and manufactured in the U.S.A.

Get Your Timing Right. SureFire SOCOM shim kits help ensure precise timing of SureFire SOCOM muzzle devices on a rifle barrel. Each kit includes shims with different thicknesses. The shims can be used alone or combined to achieve proper muzzle device alignment. Constructed from 300-series stainless steel for durability and long service life. Shims are color-coded—no need to measure to ensure proper thickness.

Built, designed and manufactured in the USA, the SureFire SOCOM556-MINI2 is meticulously engineered and packs virtually all the attributes of the popular SOCOM556-RC2 suppressor in a more compact package. Specifically designed for use with 5.56 mm (.223 caliber) weapon systems, the SOCOM556-MINI2 is carefully constructed of advanced high-temperature Inconel and stainless steel. Precision CNC laser-welding is employed to give all of our suppressors uncompromising strength and durability even when used in full-auto mode. Innovative internal baffling is incorporated to give it a significant decrease in back pressure, cyclic rate and gas blowback, which yields a tremendous reduction in sound and dust signature, and virtually undetectable first- round flash when it matters most. It also features the SureFire Fast-Attach system, which allows for easy and reliable attachment or removal of the suppressor in seconds.

YOU MUST BE 18 OR OLDER TO ENTER