Talon Evolution Grips are adhesive backed grips for guns. The PRO grips for the GLOCK 42/43 combine the best characteristics of the granulate and rubber textures. The surface of the grip which is made of ground up rubber, provides an aggressive grip without being abrasive. The PRO texture is comfortable enough for most people to carry against the skin, however it can be used in competition if desired. Talon Grips are 100% Made in the USA. Adhesive material is less than 0.5mm thick.
Talon Grips are the best aftermarket gun grip upgrade for the GLOCK 43x and 48 pistol. These thin grips (less than .5mm thick) are available in rubber, PRO, and granulate (often compared to sandpaper or gun grip tape) textures. The PRO grips combine the best characteristics of the granulate and rubber textures. The surface of the grip, which is made of ground up rubber, provides an aggressive grip without being abrasive. The PRO texture is comfortable enough for most people to carry against the skin, however it can be used in competition if desired. Talon Grips are 100% Made in the USA.
Talon Evolution Grips for GLOCK are adhesive backed grips for guns. The Compact PRO grips combine the best characteristics of the granulate and rubber textures. The surface of the grip which is made of ground up rubber, provides an aggressive grip without being abrasive. The PRO texture is comfortable enough for most people to carry against the skin, however it can be used in competition if desired. Talon Grips are 100% Made in the USA. Adhesive material is less than 0.5mm thick.
Talon Evolution Grips for GLOCK are adhesive backed grips for guns. The Full Size PRO grips combine the best characteristics of the granulate and rubber textures. The surface of the grip which is made of ground up rubber, provides an aggressive grip without being abrasive. The PRO texture is comfortable enough for most people to carry against the skin, however it can be used in competition if desired. Talon Grips are 100% Made in the USA. Adhesive material is less than 0.5mm thick.
Talon Evolution Grips for GLOCK are adhesive backed grips for guns. The Subcompact PRO grips combine the best characteristics of the granulate and rubber textures. The surface of the grip which is made of ground up rubber, provides an aggressive grip without being abrasive. The PRO texture is comfortable enough for most people to carry against the skin, however it can be used in competition if desired. Talon Grips are 100% Made in the USA. Adhesive material is less than 0.5mm thick.
Talon Evolution Grips are adhesive backed grips for guns. The PRO grips for the Sig P365 and P365XL combine the best characteristics of the granulate and rubber textures. The surface of the grip which is made of ground up rubber, provides an aggressive grip without being abrasive. The PRO texture is comfortable enough for most people to carry against the skin, however it can be used in competition if desired. Talon Grips are 100% Made in the USA. Adhesive material is less than 0.5mm thick.
Talon Grips low profile grip is custom designed and manufactured for specific firearms to provide an OEM quality fit and finish, adding minimal bulk/size. Adhesive will not move once properly installed and can be easily removed with little to no residue. It is easy to install within minutes (proper installation requires a hair dryer or heat gun). Most cleaning solutions do not harm the grip (avoid aerosol-based solvents such as CLP). The granulate texture, often referred to as sandpaper or skateboard tape, provides positive grip on the firearm and best suited for holster carry and competition shooting. This item fits the Glock 43. This rear wrap grip has full coverage on the side panels including above the thumb rest, high coverage on the backstrap, and full coverage under the trigger guard. This grip includes cutouts for the “GLOCK” graphic on the shooter’s left, the TALON “T” on the shooter’s right, and relief cuts for the thumb rest on each side.
This low profile grip is custom designed and manufactured for specific firearms to provide an OEM quality fit and finish, adding minimal bulk/size. Adhesive will not move once properly installed and can be easily removed with little to no residue. It is easy to install within minutes (proper installation requires a hair dryer or heat gun). Most cleaning solutions do not harm the grip (avoid aerosol-based solvents such as CLP). The rubber texture provides positive grip on the firearm and is more commonly used for concealed carry (less likely to irritate skin or snag on clothing) and users with softer hands. Made in the USA. Fits the Glock 43. This rear wrap grip has full coverage on the side panels including above the thumb rest, high coverage on the backstrap and full coverage under the trigger guard. This grip includes cutouts for the “GLOCK” graphic on the shooter’s left, the TALON “T” on the shooter’s right, and relief cuts for the thumb rest on each side.
Talon Grips is custom designed and manufactured for specific firearms to provide an OEM quality fit and finish, adding minimal bulk/size. Adhesive will not move once properly installed and can be easily removed with little to no residue. It is easy to install within minutes (proper installation requires a hair dryer or heat gun). The granulate texture, often referred to as sandpaper or skateboard tape, provides positive grip on the firearm and best suited for holster carry and competition shooting. Compatible with Glock Model 26/27/28/33/39 Gen3. This grip provides full coverage on the side panels including above the thumb rest, ample coverage on the backstrap, and two finger wraps for the finger grooves under the trigger guard. This grip has a logo cutout for the Glock emblem on the left side of the handle. This grip sticks extremely well even with the Rough Textured Frame (RTF).
The Talon Glock low profile grip is custom designed and manufactured for specific firearms to provide an OEM quality fit and finish, adding minimal bulk/size. Adhesive will not move once properly installed and can be easily removed with little to no residue. It is easy to install within minutes (proper installation requires a hair dryer or heat gun). The rubber texture provides positive grip on the firearm and is more commonly used for concealed carry (less likely to irritate skin or snag on clothing) and users with softer hands. Compatible with Glock Model 26/27/28/33/39 Gen3. This grip provides full coverage on the side panels including above the thumb rest, ample coverage on the backstrap, and two finger wraps for the finger grooves under the trigger guard. This grip has a logo cutout for the Glock emblem on the left side of the handle. This grip sticks extremely well even with the Rough Textured Frame (RTF).
The Talon low profile grip is custom designed and manufactured for specific firearms to provide an OEM quality fit and finish, adding minimal bulk/size. Adhesive will not move once properly installed and can be easily removed with little to no residue. It is easy to install within minutes (proper installation requires a hair dryer or heat gun). The rubber texture provides positive grip on the firearm and is more commonly used for concealed carry (less likely to irritate skin or snag on clothing) and users with softer hands. This grip provides full coverage on the side panels including above the thumb rest, ample coverage on the backstrap, and three finger wraps for the finger grooves under the trigger guard. This grip has a logo cutout for the Glock emblem on the left side of the handle. This grip sticks extremely well even with the Rough Textured Frame (RTF). Compatible with Glock 19/23/25/32/38 Gen4 with no backstrap.
The Talon low profile grip is custom designed and manufactured for specific firearms. This rear wrap grip is constructed of a textured rubber, and offers full side panel coverage including the thumb rest, trigger guard and high coverage on the backstrap. It has a graphic cutout for the Glock emblem and a Moss finish. It also sticks well with the Rough Textured Frame (RTF) and three finger wraps for the finger groves under the trigger guard. Includes a cleaning pad. Compatible with Glock 19/23/25/32/38 Gen 4 pistols with no backstraps.