Ten Point EVO-X CenterPunch 16 Carbon Arrows 16″ w/ Alpha-Nocks .001″

Designed for strength the 100-grain rear deploying EVO-X CenterPunch Broadhead features a collarless design that delivers field point accuracy and a devastating 1 7/8" cut. Its 7075 T6 aluminum ferrule ultra-strong precision point and scalpel-sharp blades stay closed during flight – creating massive wound channels and leaving huge blood trails.

The most accurate crossbow arrow ever the CenterPunch 20-inch arrow is fletched slightly offset and is fitted with an 84-grain insert and TenPoint’s white Omni-Nock an aluminum Alpha-Nock or a molded Alpha-Nock and receiver for quick lighted nock installation. Constructed from modulus carbon fiber at 33 MSI (million-pounds-per-square-inch) and wrapped in an exclusive LAZER-TECH carbon weave it is fletched with 3.5" Bohning X Vanes. CenterPunch arrows are inspected for straightness to within .001 and each package is weight-grain matched to within 1-grain per arrow.

Straightness: .001"
Grain Weigh Tolerance: +/- 1-grain per pack
Weight: 445-grains (including 100-grain field tip)
F.O.C.: 17 percent
Vane: 3.5" Bohning X
Inside Diameter: .297
Outside Diameter: .348

Ten Point EVO-X Montec Broadhead 100 gr.

Fast and compact the Havoc RS440 hunting crossbow measures just 26.5 inches long and shoots 440 FPS with its INCLUDED 400-grain arrow. Featuring the ACUslide SILENT cocking and SAFE de-cocking system and one of the industry’s best 3.5-pound two stage trigger it measures just 7.5-inches wide and includes 1-inch of length-of-pull adjustment. Features the EVO-X MARKSMAN ELITE SCOPE – a variable speed scope designed for crossbows up to 500 FPS includes a customized reticle and external target turrets for accurate shooting out to 100-yards.

REVERSE DRAW ADVANTAGE 13.5-inch power stroke generates more speed with less draw weight. Its elongated power stroke also increases the distance the arrow nock is engaged with the string – a critical component in performance as the longer the nock remains engaged with the string the more accurate the crossbow will be upon impact.
ACUSLIDE COCKING AND DE-COCKING SYSTEM Provides silent cocking and safe de-cocking.
S1 TRIGGER 2-stage zero-creep design features a roller sear system that sets a new standard
MICRO-TRAC BARREL Reduces string-to-rail contact by an incredible 50% – providing string life in excess of 1000 shots.

Includes :

Optics: EVO-X Marksman Elite Scope
Cocking Device: ACUslide Cocking and De-Cocking System
Quiver: 6-Arrow Tech Quiver
Crossbow Arrows: Six Evo-X CenterPunch16 premium carbon arrows with 100-grain practice points
Bubble Level

Brass inserts for TenPoint Pro Elite carbon crossbow bolts.

Lightweight, quick disconnect three arrow quiver features an ultra durable spine. Quiver compatible with traditional quiver bracket or the side mounting quiver bracket. With three mounting positions it lets you mount quiver to your personal preference. Comes with all mounting hardware.

The 6″ ACUslide / ACUdraw De-Cock Crank Handle is designed to significantly reduce the effort required to cock and de-cock your crossbow. Crafted with a durable stainless-steel socket, it ensures a superior connection to the ACUslide MAXX, ACUslide, or ACUdraw De-Cock Cocking Device. The handle also includes a hex drive conversion kit for compatibility with ACUdraw PRO and ACUdraw systems. This accessory is prized for its ease of use and is an essential addition for crossbow enthusiasts looking to streamline their cocking process.

The TenPoint Ready-to-Hunt Accessory Kit includes the essential gear every crossbow hunter needs in one convenient package. This kit features a 3-pack of Alpha-Blaze red lighted crossbow nocks for enhanced visibility, and a 3-pack of Nemesis broadheads for lethal performance in the field. Also included is the TenPoint Premium Sling for comfortable carry, premium lubricant with a foam applicator for smooth operation, and string wax and conditioner to maintain string performance. It’s a complete, field-ready bundle designed to elevate your next hunt.

The ACU-X 20 is a 20-inch, 440-grain crossbow arrow built with a high-performance carbon shaft and a precision spine-indexing process for consistent long-range accuracy in rail-less forward-draw crossbows. It uses a Snap-On nock that provides an audible click when engaged and is designed to reduce lateral nock travel while helping preserve center serving life. Each arrow is fletched with 2-inch Blazer vanes and includes a 92-grain insert, delivering a 16.5 percent FOC. Arrows are inspected to 0.001-inch straightness and weight matched within 1 grain per arrow.

Configured specifically for TenPoint's rail-less forward draw crossbows

20-Inch / 440-grain (+/- 1-grain) / Balanced at 16.5% FOC / .001″ Straightness

Super bright for superior flight visibility the lighted ACU-X 20 is equipped with TenPoint’s ACU-X Lighted Snap-On Nock with easy activation and deactivation. Upon firing the crossbow the bow string pushes the nock fully into the bushing and activates the LED Light. To deactivate grip the nock and pull straight out with your fingers or Bednar Perfect Puller (sold separately) until the LED Light turns off. LED Light lasts approximately 24-hours when activated.

The 20-inch 440-grain ACU-X arrow features a high-performance carbon shaft and a new precision spine-indexing manufacturing technique – placing the spine of the arrow in the exact configuration that has been tested and proven to perform best specifically for TenPoint's rail-less forward draw crossbows delivering the ultimate in consistency and long-range accuracy out of this platform.

The ACU-X Snap-On Nock features TenPoint's innovative Snap-On design providing an unmistakable audible “click” when properly engaged with the bowstring eliminating lateral nock travel during the shot cycle for precision long-range accuracy while preserving string center serving life.

TenPoint paired this revolutionary nock with industry-leading 2″ Blazer vanes renowned for their exceptional performance across all archery disciplines delivering unmatched shot-to-shot consistency at extended ranges. ACU-X 20 arrows are equipped with a 92-grain insert – giving it a 16.5% F.O.C. for improved flight stability and accuracy.

Each arrow is inspected for straightness to within .001″ and each package is weight-grain matched within 1-grain per arrow.

20-inches
440-grains (with included 100-grain field point)
2-inch Blazer Vanes
.001 Straightness
Weight-grain matched to within 1-grain per arrow.
ACU-X Lighted Snap-On Nock (Lighted Snap-On Nock weight – 29-grains)

CONFIGURED SPECIFICALLY FOR TENPOINT'S RAIL-LESS REVERSE-DRAW CROSSBOWS

20-INCH / 440-GRAINS (+/- 1-GRAIN) / BALANCED AT 16.5% FOC / .001″ STRAIGHTNESS

Super bright for superior flight visibility the lighted ACU-X RD is equipped with TenPoint’s ACU-X Snap-On Lighted Nock with easy activation and deactivation. Upon firing the crossbow the bow string pushes the nock fully into the bushing and activates the LED Light. To deactivate grip the nock and pull straight out with your fingers or Bednar Perfect Puller (sold separately) until the LED Light turns off. LED Light lasts approximately 24-hours when activated.

The 20-inch 440-grain ACU-X RD arrow features a high-performance carbon shaft and a new precision spine-indexing manufacturing technique – placing the spine of the arrow in the exact configuration that has been tested and proven to perform best specifically for TenPoint's rail-less reverse-draw crossbows delivering the ultimate in consistency and long-range accuracy out of this platform.

The ACU-X Snap-On Nock features our innovative Snap-On design providing an unmistakable audible “click” when properly engaged with the bowstring eliminating lateral nock travel during the shot cycle for precision long-range accuracy while preserving string center serving life.

Each arrow is inspected for straightness to within .001″ and each package is weight-grain matched within 1-grain per arrow.

20-inches
440-grains (with included 100-grain field point)
2-inch Blazer Vanes
.001 Straightness
Weight-grain matched to within 1-grain per arrow.
ACU-X Snap-On Lighted Nock (Lighted Snap-On Nock weight – 29-grains)

NOTE: Required for use with TenPoint rail-less crossbows

CONFIGURED SPECIFICALLY FOR OUR RAIL-LESS FORWARD DRAW CROSSBOWS

20-INCH / 440-GRAINS (+/- 1-GRAIN) / BALANCED AT 16.5% FOC / .001″ STRAIGHTNESS

The 20-inch 440-grain ACU-X arrow features a high-performance carbon shaft and a new precision spine-indexing manufacturing technique – placing the spine of the arrow in the exact configuration that has been tested and proven to perform best specifically for our rail-less forward draw crossbows delivering the ultimate in consistency and long-range accuracy out of this platform.

Each arrow is inspected for straightness to within .001″ and each package is weight-grain matched within 1-grain per arrow.

20-inches
440-grains (with included 100-grain field point)
2-inch Blazer Vanes
.001 Straightness
Weight-grain matched to within 1-grain per arrow.
ACU-X Snap-On Nock (Lighted Snap-On Nock weight – 29-grains)

CONFIGURED SPECIFICALLY FOR OUR RAIL-LESS REVERSE-DRAW CROSSBOWS

20-INCH / 440-GRAINS (+/- 1-GRAIN) / BALANCED AT 16.5% FOC / .001″ STRAIGHTNESS

TenPoint's paired this revolutionary nock with industry-leading 2″ Blazer vanes renowned for their exceptional performance across all archery disciplines delivering unmatched shot-to-shot consistency at extended ranges. ACU-X 20 arrows are equipped with a 92-grain insert – giving it a 16.5% F.O.C. for improved flight stability and accuracy.

Each arrow is inspected for straightness to within .001″ and each package is weight-grain matched within 1-grain per arrow.

20-inches
440-grains (with included 100-grain field point)
2-inch Blazer Vanes
.001 Straightness
Weight-grain matched to within 1-grain per arrow.
ACU-X Snap-On Nock (Snap-On Nock weight – 29-grains)

3-pack ACU-X Snap-On Lighted Crossbow Nock (Green)

The ACU-X Snap-On Lighted Nock contains a one-piece Nock/LED unit that is indexed with the vanes and press fits into the arrow’s Aluminum Bushing. Upon firing the crossbow the bowstring’s force compresses the two pieces and activates the lighted nock. Deactivate the easy on/off ACU-X Snap-On Lighted Nock by pulling the nock straight out until the light turns off. The LED light of the ACU-X Snap-On Lighted Nock system lasts for approximately twenty-four hours when activated. Use of the Bednar Perfect Puller 2.0 makes lighted nock deactivation extremely easy.

Easy-to-use one-piece ACU-X Snap-On Nock / LED unit – no assembly required
515+ FPS approved
Features a Nock Retention Groove that allows the user to both hear and feel the positive engagement of the nock to the string on TenPoint rail-less crossbows
Bowstring activated
Super bright LED light provides superior arrow flight visibility
Easy deactivation
24-hour battery life when activated (approximate)
Features TenPoint’s ACU-X Snap-On Nock (Only for use with TenPoint Rail-Less Crossbows)
Fits all TenPoint & Wicked Ridge arrows with an HP Aluminum Bushing (sold separately)
3 Lighted Nocks per pack
Nock Weight: 27-grains

*Note: HP Aluminum Bushing and Arrow sold separately

The patented ACUdraw is one of the most user friendly and practical solution available on the market today for cocking a crossbow effortlessly and accurately. Fully integrated into the stock, with no dangling parts, it requires only the strength of the average person’s index finger to operate. The ACUdraw allows hunters of all ages and physical abilities to enjoy the great experience of bowhunting. Includes adapter plates to fit any Wicked Ridge model.

Replacement ACUdraw hand crank.

Replacement ACUdraw cord for post 1998 models.

The TenPoint ACUdraw Silent Cocking Device offers a quiet and efficient solution for cocking compatible crossbows. Designed to be simpler and more reliable than previous Accudraw Pro systems, this crank system ensures silent operation and smooth performance in the field. It is compatible with most TenPoint and Wicked Ridge bows that feature a stock-mounted crank interface. The complete kit includes a claw, strap, crank mechanism, and a new crank handle for quick and easy setup.

A revolutionary portable, retractable crossbow rope-cocker that cocks a crossbow like traditional rope-cockers on the market today, but that’s where the comparison ends. When the shooter is finished cocking the bow, the ACUrope’s draw cord completely retracts inside one of the two grips. Then, the grips dovetail neatly together to form a compact unit that the hunter can conveniently slip inside a belt-mounted holster or pouch. The unit’s slender draw cords are made of heat and abrasion resistant SPECTRA 1000 fiber.

A portable, retractable rope-cocker designed for most TenPoint, Horton, and Wicked Ridge crossbows, including reverse-draw and acute string angle crossbows, the ACUsled reduces a crossbow’s draw weight by 50 percent and reduces the risk of inaccurate cocking that can occur with traditional rope-cockers, and thus, improves a shooter’s accuracy. The lightweight unit’s draw cord is pound-for-pound 15 times stronger than steel and completely retracts inside one of the two grips after cocking the crossbow. Then, the grips dovetail neatly together to form a compact unit for easy storage.

The TenPoint ACUslide Replacement Parts Kit provides essential components to maintain and restore your ACUslide-equipped crossbow. Compatible with all standard ACUslide crossbows, this kit includes a replacement brush, a Dry-Fire-Inhibitor (DFI) spring, and a mounting screw. It’s a simple and effective solution for ensuring continued safe and reliable operation of your crossbow system.

Change your safety from right hand to left hand on your ACUslide Series crossbow.

YOU MUST BE 18 OR OLDER TO ENTER