YOU MUST BE 18 OR OLDER TO ENTER

Tipton’s Max Force Cleaning Rod features a patent pending sliding handle. Now you can put the force you need right next to the bottle neck section you need it applied to. The sliding handle still allows the rod to rotate freely even while clamped down. This model is compatible with .17-.20 Cal with 5/40 threads.

This degreaser is specially formulated to rapidly remove grease oil and debris from all firearm actions barrels and slides without damaging the surfaces of firearm plastics polymers and metals. Its quick-drying formula won’t leave deposits behind.. Use in conjunction with the other Tipton's Best 1-2-3 cleaning products; Best Gun Degreaser and Best Gun Oil. Tipton Best cleaning products make professional firearms cleaning easy. It’s not clean until it’s Tipton clean.

• Works with all firearms
• Removes grease oil powder residue and other debris from actions barrels and other gun parts
• Safe for all firearm plastics polymers and metals
• Quick-drying formula
• 15 oz aerosol can
• Made in USA

Tipton’s Best Gun Vise is the best tool you can own for working on your firearms. The vise was designed to accommodate the widest possible array of firearms for cleaning maintenance or gunsmithing and is easily configurable to handle bolt-action rifles break-open shotguns AR-15’s and handguns. A central aluminum channel lets the user move individual components to the ideal position for their firearm. Each individual component then adjusts to the perfect position for secure support. The rear base features two adjustable offset clamps for a tight grip on a wide range of buttstock configurations. The Best Gun Vise is extremely stiff and is made from high-quality solvent-resistant material that will stand up to years of hard use.

• Non-marring contact surfaces
• Every component adjusts to accommodate different firearms and projects
• Stiff solvent-resistant polymer stands up to years of hard use
• Innovative off-set clamping mechanism on rear base
• Highly adjustable design for maximum versatility

The Best Gun Vise Gen 2 continues Tipton’s legacy of innovation and reliability in firearm care. Building on everything users love about the original Best Gun Vise this upgraded model introduces enhanced features for even greater versatility and performance. It’s equipped with two heavy-duty steel-reinforced clamps lined with non-marring rubber over-molding to protect valuable stock finishes and barrel coatings. A central aluminum rail allows both arms to slide freely making it easy to accommodate firearms of all shapes and lengths. Rubberized feet ensure the vise stays firmly in place on your workbench. Featuring two Tipton VISE MOD accessory docks that allow the user to add custom accessories for the task at hand. The Best Gun Vise Gen 2 includes both the VISE MOD Tool Holder and VISE MOD Parts Tray with additional accessories sold separately including work lights and magnetic parts trays. Whether you're cleaning maintaining or mounting optics the Best Gun Vise Gen 2 is built to handle it all with confidence and care.

Features:

• Secure Hold: Steel-reinforced clamps hold firearm stocks securely in place during cleaning & maintenance
• Fits all Firearms: Adjustable clamps easily slide along the central metal rail to accommodate different lengths of firearms
• Protects Finishes: Non-marring rubber over-molding on clamps prevents damage to stocks and barrels
• Quick Adjustments: Fast-turn knobs on clamps allow for quick and easy adjustments
• Stable Platform: Rubberized feet prevent the vise from sliding on the workbench surface
• VISE MOD: Includes Vise Mod Rod & Tool Holder and Parts Tray to conveniently keep essential tools and parts within reach

• EASE OF USE: Simply slide the pellet onto the included jag and begin cleaning
• DURABLE: Tough material allows for a thorough wipe-down
• CONVENIENT: The compressed felt pellets provide a more consistent fit in land and grooves of rifling for a superior clean
• INCLUDES: .22 (100 count) 9mm (50 count) .40 (50 count) .44/.45 (50 count) caliber sized pellets and cleaning jags (1 per caliber) in a plastic storage case

The Tipton Compact Range Vise offers a completely new level of performance securely holding he widest array of guns possible while collapsing to fit in a range bag. The compact design is a convenient solution to gun cleaning at the range. The Compact Range Vise collapses to 11-1/4” and fully expands to 17-3/4” making it easily carried but full functioning when completely expanded. Six rubber feet provide the vise a very rigid non-slip base. Two non-marring forks protect your guns’ finish while holding them securely in place for cleaning light maintenance or as an extra set of hands. The Compact Range Vise is extremely durable and is made from high quality solvent-resistant nylon that will deliver years of lasting performance.

limSerious shooters know keeping their guns clean is essential to performance making the Compact Range Vise the perfect range accessory.

• Solvent-resistant nylon delivers lasting performance
• Adapts to securely hold all types of firearms
• Expands from 11-1/4” to 17-3/4”
• Non-marring contact surfaces

Carbon fiber is well-suited to the tough tasks assigned to cleaning rods. It combines the best features of stainless steel and coated cleaning rods then adds valuable properties of its own. Stainless steel rods can scratch or wear barrels if they’re used carelessly – though they won’t pick up potentially damaging small abrasive particles. Coated rods get part of the job done – they keep the stainless steel shaft from damaging your barrel’s rifling but the coating will pick up small abrasive particles which means you’re effectively running finegrit sandpaper through your bore. Carbon fiber rods are the best of both: the carbon fiber can’t scratch your bore like stainless steel and they won’t embed like coated rods. Plus Carbon Fiber rods can be bent to an extreme degree and return to their original straightness. During Operation Iraqi Freedom US military armorers called on Tipton to provide cleaning rods that would clean service rifles in demanding conditions. It made sense to us: Carbon fiber is an ideal material for cleaning rods. We call these cleaning rods deluxe because they feature an ergonomically designed handle that spins on two sets of ball bearings – the result is a cleaning rod that smoothly follows the rifling both pushing and pulling even while under pressure. The shank-through construction also allows the user to apply reasonable hammer blows to the end of the cleaning rod to get a tight patch through a bore. Available in four diameters and six lengths to fit most rifles pistols and shotguns.

Carbon fiber is well-suited to the tough tasks assigned to cleaning rods. It combines the best features of stainless steel and coated cleaning rods then adds valuable properties of its own. Stainless steel rods can scratch or wear barrels if they’re used carelessly – though they won’t pick up potentially damaging small abrasive particles. Coated rods get part of the job done – they keep the stainless steel shaft from damaging your barrel’s rifling but the coating will pick up small abrasive particles which means you’re effectively running finegrit sandpaper through your bore. Carbon fiber rods are the best of both: the carbon fiber can’t scratch your bore like stainless steel and they won’t embed like coated rods. Plus Carbon Fiber rods can be bent to an extreme degree and return to their original straightness. During Operation Iraqi Freedom US military armorers called on Tipton to provide cleaning rods that would clean service rifles in demanding conditions. It made sense to us: Carbon fiber is an ideal material for cleaning rods. We call these cleaning rods deluxe because they feature an ergonomically designed handle that spins on two sets of ball bearings – the result is a cleaning rod that smoothly follows the rifling both pushing and pulling even while under pressure. The shank-through construction also allows the user to apply reasonable hammer blows to the end of the cleaning rod to get a tight patch through a bore. Available in four diameters and six lengths to fit most rifles pistols and shotguns.

The Gun Butler offers a convenient all-in-one solution to all your cleaning/carrying/storage needs. Two removable non-marring forks (which snap into the base for easy storage) hold the gun securely in place while thoughtfully-planned compartments and slots hold bore solvent jags brushes mops a cleaning rod spray lubricant and tools. The Gun Butler contains everything a shooter needs to clean a gun – all with a convenient carrying handle for easy transport.

For many hunters and shooters gun cleaning is enough of a chore without having to keep track of all the tools and supplies it takes to clean a gun properly. Serious shooters who clean on a regular basis often clean both at the shop and on the range. The Gun Butler offers an affordable convenient solution for storage and transportation of supplies as well as a secure gun holder for the actual cleaning process.

• Great for storage organization and transportation of cleaning supplies
• Non-marring cleaning forks hold gun securely
• Molded in compartments for oranization
• Non-slip rubber feet
• Durable and rigid solvent resistant polymer construction

The Tipton RAPID Deluxe Bore Guide Kit contains several great tools that ensure the safest easiest and most effective cleaning possible. The RAPID Deluxe Bore Guide Kit allows you to easily align and secure a patch for solvent application then holds it with the correct amount of tension for perfect jag penetration. When the rod is pushed into the RAPID it automatically releases the patch. It also keeps harmful solvents off your gun’s finish in the process. A bore guide will help protect the bore and action of your rifle by properly aligning the cleaning rod and reducing solvent overflow. Cleaning without a bore guide can allow the rod to “bow” and rub or gouge the chamber and throat of the bore causing real damage and loss of accuracy. Keeping the rod properly aligned not only protects your barrel it properly directs the force exerted on the cleaning rod handle allowing tight patches to be pushed safer and easier.

• Ensures Proper Rod Alignment For Easier Cleaning
• Bore Guides Protect Chamber And Bore From Damage
• Anodized Aluminum Tube For Durability
• Kit Includes 4 Muzzle Guides
• Fits Most Bolt Action Rifles And AR-15s

Tipton Snap Caps 45 ACP 5 Pack

It is generally accepted that once should not drop the firing pin on an empty chamber which is the primary reason to have Snap Caps for your favorite guns. You should always use Snap Caps when checking or adjusting the trigger pull. If you prefer to release the tension on the hammer springs when storing your guns Snap Caps are ideal.

It is generally accepted that once should not drop the firing pin on an empty chamber which is the primary reason to have Snap Caps for your favorite guns. You should always use Snap Caps when checking or adjusting the trigger pull. If you prefer to release the tension on the hammer springs when storing your guns Snap Caps are ideal.

FEATURES:
-Free standing, 4-leg system removes the need for a table or bench
-Oversized levers for easy leg deployment
-35″ height for optimal comfort while working
-Lightweight
-Collapsible for easy storage & transport
-Built-in bottle opener
-Mountable directly to standing rails

Tipton Ultra Cleaning Kit

Features:

• Rigid Steel Frame
• Modular chassis design
• Different modules can be quickly moved rearranged or removed anywhere along the rail
• Over molded rubber contact pads throughout the device prevent damage to firearm
• Ball and socket articulating clamp pads allow for the pads to adapt to any surface
• Leveling feet on all corners makes scope leveling easier
• Dual Clamp Technology rigidly holds any gun shape in place
• Tube frame structure allows for complete access to your rifle
• Fast-Turn knobs for quick clamping
• AR Vise Block module included for working on and cleaning AR-15s
• Front and Rear clamps are both height and length adjustable
• Modular system allows you to clamp components like AR Upper assemblies without needing to have them attached to the lowers.
• Works with break action firearms. You can clamp the forward/barrel while leaving the rear to swing open
• Works with Pistols allowing you to mount optics or clean efficiently
• 2 re-arrangeable or removable accessory trays
• Engineered Glass Filled Nylon construction provides a high level of rigidity while preventing damage to your firearm
• Stainless Steel reinforcing plates throughout the design provide reinforcement and rigidity
• Solvent-resistant materials stand up to years of hard use

The Universal Gun Maintenance Stand works with any Tipton gun vise. Make your gun vise accessible while standing so you can comfortably and completely access your firearm while cleaning. Legs are collapsible so you can easily store it when it's not in use. Tipton's proprietary Universal Gun Maintenance Stand is specifically engineered to clean accurately and efficiently so you can get back to shooting.

• Free Standing 4-leg System Removes The Need For A Table Or A Bench
• Oversized Levers For Easy Leg Deployment And Built-in Bottle Opener
• 35" Height For Optimal Comfort While Working
• Lightweight Weighing Approximately 20lbs
• Makes Cleaning Convenient In The Field Or On The Range