The Troy 0.750 Low-Profile Gas Block is made specifically for rifle barrels that have a 0.750 gas block seat. The low-profile design allows for clearance of most aftermarket rails that require a smaller gas block. Machined from 4140 pre-hardened steel finished with MIL-STD Manganese Phosphate. The Troy low profile gas block fits tightly to the barrel using two set screws. Gas tube roll pin not included.
Durability and dead-on accuracy have made Troy Industries Folding BattleSights the choice of Special Ops and tactical users worldwide. The Troy 45 Degree Folding BattleSights fold compactly to both sides of the rifle. With an ambidextrous sight base Troy 45 Degree BattleSights work seamlessly with magnified optics. Easy to install and deploy these sights position apertures at factory height. A stainless-steel cross-locking system ensures sight remains upright and zeroed under extreme combat conditions.
Note: Sight is designed to work on same plane rail systems only. Will not work with a railed gas block that is higher or lower than the receiver.
Durability and dead-on accuracy have made Troy Industries Folding BattleSights the choice of Special Ops and tactical users worldwide. The Troy 45 Degree Folding BattleSights fold compactly to both sides of the rifle. With an ambidextrous sight base Troy 45 Degree BattleSights work seamlessly with magnified optics. Easy to install and deploy these sights position apertures at factory height. A stainless-steel cross-locking system ensures sight remains upright and zeroed under extreme combat conditions.
Note: Sight is designed to work on same plane rail systems only. Will not work with a railed gas block that is higher or lower than the receiver.
Durability and dead-on accuracy have made Troy Industries Folding BattleSights the choice of Special Ops and tactical users worldwide. The Troy 45 Degree Folding BattleSights fold compactly to both sides of the rifle. With an ambidextrous sight base Troy 45 Degree BattleSights work seamlessly with magnified optics. Easy to install and deploy these sights position apertures at factory height. A stainless-steel cross-locking system ensures sight remains upright and zeroed under extreme combat conditions.
Note: Sight is designed to work on same plane rail systems only. Will not work with a railed gas block that is higher or lower than the receiver.
Building off of the patented TRX Extreme design that revolutionized rail-based handguards the Alpha Rail utilizes a new low-profile locking mechanism and affords unparalleled strength and stability.
Features:
Technical Specifications:
Note: Alpha rails do not work with the TRX Barrel Nut or TRX Barrel Wrench.
The Ambidextrous Bolt Release is an indispensable device that easily releases or holds bolt open with one hand to streamline firearm clearing and reloading after a malfunction. By being ambidextrous this bolt release eliminates hand changeovers improving control of rifle when in use. Made from hardened aircraft aluminum. Available in Black.
The Ambidextrous Charging Handle is for AR15 M16 and M4 type rifles. The ambidextrous design allows users to charge their rifle with either hand making operation under extreme conditions less complicated. The handle tabs are enlarged increasing the surface area making it easier to operate. Made from hardened aircraft aluminum. Available in Black.
The Ambidextrous Magazine Release replicates the feel and length of a standard magazine release button but also accommodates left-handed shooters and one-handed magazine changes. This magazine release is constructed of rugged machined billet tool steel. Patent pending. Available in Black.
The Troy Standard AR15 Barrel Nut is a rugged alternative to standard barrel nuts.
FEATURES
-Black
-4.4″
-3 pack
-Easily slides onto a Mil-Std Picatinny rail
-Locks into place with a built-in retaining clip
-Can be adjusted with a bullet tip
-No tools required
-Constructed from durable, heat & chemical-resistant synthetic polymer resin
-Proven to reduce heat transfer & hand abrasions
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 1.60 X 5.85 X 8.05 | |
| Height | 1.6000 | |
| Width | 5.8500 | |
| Length | 8.0500 | |
| TYPE/COLOR | RAIL COVER | |
| SIZE/FINISH | BLACK | |
| MATERIAL | POLYMER | |
| AR-15 ACCESSORY | Y | |
| OTHER FEATURES: | ENGINEERED TO SURVIVE | |
| THE MOST EXTREME CONDITIONS | ||
| FITS ALL PICATINNY RAILS TO | ||
| CREATE A MORE COMFORTABLE GRIP | ||
| MADE IN USA | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
The Troy BattleMag is the best polymer magazine in the world – hands down. The BattleMag is engineered to function flawlessly with all M4 M16/AR15 HK416 and FN SCAR rifles and carbines. An aggressive scale pattern provides the ultimate magazine grip in dirty or wet conditions. A bolstered floor plate is set flush to eliminate the BattleMag from catching on other magazines or creating unnecessary bulk when stacked or pulled from a pouch. The reinforced feed lips and anti-tilt follower do not require a clamp to keep the feed lips from spreading when kept loaded for extended periods of time. Made from improved Troy proprietary military-grade chemical biological and impact resistant polymer and extensively tested by Special Ops units the Troy BattleMag outperforms all other polymer magazines in functionality and reliability. Includes a flush and shock absorbing extended floor plate lock – a $5 value. Available in Black. Note: Only Available in Caliber 223/5.56.
The BattleMag is engineered to function flawlessly with all M4 M16/AR15 HK416 and FN SCAR rifles and carbines. An aggressive scale pattern provides the ultimate magazine grip in dirty or wet conditions. A bolstered floor plate is set flush to eliminate the BattleMag from catching on other magazines or creating unnecessary bulk when stacked or pulled from a pouch. The reinforced feed lips and anti-tilt follower do not require a clamp to keep the feed lips from spreading when kept loaded for extended periods of time. Made from improved Troy proprietary military-grade chemical biological and impact resistant polymer and extensively tested by Special Ops units the Troy BattleMag outperforms all other polymer magazines in functionality and reliability. Includes a flush and shock absorbing extended floor plate lock.
The TROY X-Series M-LOK Rail is purpose built to give you the lightest free-float forend without excess bulk. The sleek snag-free design gives you what you need — and nothing you don’t.
Troy removed the top rail on the ultra-light X-Series and cut M-LOK slots along the top panel. The X-Series will keep your barrel cool during high round count engagements.
There are four 1913 picatinny slots at the muzzle end and two at the receiver. Four anti-rotation quick-detach sling swivel mounts allow you to mount your sling without additional hardware.
TROY X-Series Rails are made in Clarksville TN from American sourced 6061 T-6 extruded aluminum. They’re Type III hard-coat anodized lightweight and gunfighter tough. And there’s no need for proprietary barrel mounts — the X-Series mounts to any mil-spec barrel nut with our quad-clamp system. The quad-clamp ensures your rail won’t shift during heavy use — and your rail mounted devices won’t lose zero.
Built-in texturing on the 3 6 9 & 12 o’clock M-LOK panels help you lock your C-clamp grip down better than traditional slick rails.
Features:
- Rail Length: 15.125”
- M-LOK top rail | 4x 1913 slots at muzzle & 2x 1913 slots at receiver
- Get it in anodized black or FDE Cerakote
- Ultralight free float M-LOK rail
- Quad-clamp mounts to any mil-spec AR-15/M4 barrel nut
- Four anti-rotation quick-detach sling swivel mounts
- American sourced | American made
- Mounting hardware included
- Limited Lifetime Warranty against all manufacturing defects
- Patents Pending
FEATURES
-Black
-Low-profile
-Designed for firearms with top rails higher than the standard M4
-For shooters who favor a sightline that’s as close to the barrel as possible
-Also for those with raised top rail systems
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 1.20 X 6.00 X 8.00 | |
| Height | 1.2000 | |
| Width | 6.0000 | |
| Length | 8.0000 | |
| TYPE/COLOR | FOLDING BATTLE SIGHT | |
| SIZE/FINISH | MICRO/HK STYLE | |
| MATERIAL | ALUMINUM | |
| AR-15 ACCESSORY | Y | |
| OTHER FEATURES: | LOW PROFILE DESIGN FOR | |
| FIREARMS WITH TOP RAILS HIGHER | ||
| THAN THE STANDARD M4. | ||
| PERFECT FOR THE SIG 556, | ||
| POF 416/417, FNH SCAR 16/17 | ||
| ROBINSON ARMAMENT XCR | ||
| HK 416/417 AND OTHERS WITH | ||
| RAISED TOP RAILS. | ||
| NOT DESIGNED FOR THE AR-15 | ||
| NO DIRECT SHIP TO CALIFORNIA | ||
The Troy Claymore Muzzle Brake directs muzzle blast and sound forward away from the shooter while retaining effective muzzle brake properties. This rugged muzzle brake features a very low dust signature without a swirling effect and is tough enough to serve as an improvised breaching device if the situation calls for it.
This front grip is your solution to a front grip that attaches to any MIL-STD Picatinny Rail without tools. The Troy CQB Vertical Grip attaches to any MIL-STD Picatinny Rail without tools featuring a waterproof storage compartment and aggressive ridged pattern for an enhanced grip rounds out this lightweight option for a vertical grip. Machined from billet aircraft aluminum and finished in hardcoat anodizing.
This front grip is your solution to a front grip that attaches to any MIL-STD Picatinny Rail without tools. Made from Troy proprietary military-grade chemical biological and impact resistant polymer the CQB Vertical Grip will not heat up during rapid fire or full auto fire. A waterproof storage compartment and aggressive ridged pattern for an enhanced grip rounds out this lightweight option for a vertical grip.
These sights provide lightning fast target acquisition and are manufactured to exceed military specs. The optically engineered apertures center your eyes instantly and effortlessly providing a clearer target picture than with round apertures. The sights feature two settings one for up to 300 meters and a second for up to 500 meters. This versatility makes the DOA ideal for military law enforcement and home defense applications. These advanced sights have been extensively field-tested and like all Troy Industries products are BattleReady.
The Troy Drop-In Rail is a non free-floating direct replacement for all M4/AR15 Carbine length plastic hand guards with a round end plate. The Troy patented clamping design ensures a solid mounting platform and provides a true optical mounting platform that increases the modularity and accuracy of the M4.
The TROY Pump Action Rifle takes the ergonomics and versatility of the modern sporting rifle and deploys them in a new manually operated integrated pump action for sporting and defense applications.
The New TROY 3″ SOCC-VFG is a robust low profile one piece vertical grip. Machined from billet T6 aluminum with an aggressive grenade like pattern for enhanced grip and control. Weighing in at only 2.8oz. this rugged ergonomic grip directly attaches to any M-LOK rail with the included mounting hardware. U.S. Military Specification Type III hardcoat anodized. Available in Black; Gray; FDE; OD Green.
Durability and dead-on accuracy make Troy BattleSights the hands-down first choice of Special Ops and Tactical Users Worldwide. Troys HK Front Fixed BattleSight a permanent rail-mounted alternative to a standard A2 sight allows limitless mounting options on all-length rails with a serrated ramp.
Durability and dead-on accuracy make Troy BattleSights? the hands-down first choice of Special Ops and Tactical Users Worldwide.Troy?s HK Front Folding BattleSight is easy to install and deploy with no levers or springs to fumble with. No tools required for adjustment.
Features:
- Sight can be moved or taken off without permanent modification to the firearm.
- A stainless-steel cross-locking system ensures sights remain upright and zeroed under extreme combat conditions.
- A push of a button folds the sights securely out of the way until you need them again.
- Machined from hardened Aircraft Aluminum with stainless steel components and finished in MIL-SPEC hardcoat anodizing.
- Each click adjusts .50 MOA.
Durability and dead-on accuracy make Troy BattleSights? the hands-down first choice of Special Ops and Tactical Users Worldwide.Troy?s M4 Front Folding BattleSight is easy to install and deploy with no levers or springs to fumble with. No tools required for adjustment.
Features:
- Sight can be moved or taken off without permanent modification to the firearm.
- A stainless-steel cross-locking system ensures sights remain upright and zeroed under extreme combat conditions.
- A push of a button folds the sights securely out of the way until you need them again.
- Machined from hardened Aircraft Aluminum with stainless steel components and finished in MIL-SPEC hardcoat anodizing.
- Each click adjusts .50 MOA.