YOU MUST BE 18 OR OLDER TO ENTER

Wheeler Engineering Bolt Catch Install Punch Kit starts bolt catch roll pins easily with the starter punch and finishes installation flush with the finishing punch.

FEATURES:
-Includes 3 wood bushings, one 1″ & one 3/4″ predrilled block & one solid block for custom drilling

The Wheeler Engineering Delta Series AR Combo Tool will cover most of your AR-15 service needs with a single tool. An innovative layered and laminated stamped steel construction makes the Delta Series Combo Tool the most durable AR tool available. This construction method allows the use of hardened steel barrel nut pins designed to hold up to heavy torque requirements. A cut out for a ½” drive allows the tool to be used with a torque wrench or ratchet driver. Profiles for buffer tube lock nut and flash hider are included.

Tired of trying to secure your AR parts while installing a pin detent or spring? The AR-15 Bench Block is the answer! Specifically designed for AR-15 assembly and disassembly the AR-15 Bench Block is the perfect tool. Made of extremely durable non-marring urethane to protect the finish of your firearms and last for years. It features a variety of notches grooves and holes on both sides and is ideally suited for the upper receiver lower receiver front sight and charging handle of an AR-15.

• Positions the upper receiver lower receiver front sight and charging handle for maintenance or assembly
• Durable non-marring urethane material to protect gun finish
• Designed to assist in all aspects of an AR-15 build
• Ideal for changing or adjusting triggers

The Wheeler®Delta Series AR Armorer’s Essentials Kit contains all of the essential tools a gunsmith or armorer needs to complete a full rifle build make repairs or perform normal maintenance on AR-15/M16 platform rifles. Each of these Delta Series tools is designed with application specific features to perform specific functions with precision and ease. Each tool is constructed of the highest quality materials to deliver the best performance at a great value. All of the tools fit inside the durable carry case for convenient storage and transport.

This 7-piece Armorer’s Kit contains the best tools available and will enhance any user’s ability to work on any AR. Essentials Kit includes: AR15 Combo Tool Torque Wrench Upper Vise Block Clamp w/ Gas Tube Alignment Tool Pivot Pin and Roll Pin Installation Tool Mag Well Vise Block AR -15 Adjustable Receiver Link Custom Fitted Carrying Case

The Wheeler® Delta Series AR Armorer?s Professional Kit contains all of the tools a gunsmith or armorer needs to complete a full rifle build make repairs or perform maintenance on AR-15/M16 platform rifles. Each of these Delta Series tools is designed with application specific features to perform specific functions with precision and ease. Each tool is constructed of the highest quality materials to deliver the best performance at a great value. This all-inclusive 19 piece Armorer?s Kit has some of the most innovative AR-15 tools on the market today making it the most advanced kit out there. All of the tools fit inside the durable carry case for convenient storage and transport.

Professional Kit includes :

• AR Armorers Vise
• AR15 Combo Tool
• Torque Wrench
• Upper Vise Block Clamp w/ Gas Tube Alignment Tool
• Maintenance Mat with Exploded View AR-15
• Pivot Pin and Roll Pin Installation Tool
• AR Front Sight Tool
• Delta Ring Tool
• Strap Wrench
• AR-15 Bore Guide
• AR -15 Adjustable Receiver Link
• Bore Brush .22 Cal
• Bolt Carrier Brush
• Chamber Brush
• Magazine/Upper Receiver Brush
• Nylon Brush Handle
• Double-ended General Cleaning Brush
• Cleaning Pick Set
• Custom Fitted Carrying Case

The integrated Mag Well insert securely engages the lower receiver and adjusts in angle to accommodate any task. The innovative front support also has angle adjustment allowing the barrel portion of the upper or a forend portion to be secured in its tapered shape. The base is constructed of rigid steel and non-slip rubber feet. Feet can be removed for permanent bench-top mounting. Dpressions formed into the base keep spare parts or tools contained. Additional features in ths mage well insert include a hammer stop and a bolt service station that secures the bolt face for disassembly/assembly.
? Highly adustable to secure any AR in any configuration
? Rigid construction deliver a solid work platform
? Ideal for cleaning maintenance and gunsmithing

Vise block is designed to securely hold basically any AR upper receiver. It will secure AR-15 uppers by engaging the takedown lugs on the bottom of the receiver. By reversing the direction it will secure most AR-10 style uppers in the same manner. In addition it will secure any Pic Rail on a hi-rise standard flat top or many other integrated rail guns by sliding onto and clamping the rail. The durable machined aluminum construction and precise tolerances ensure a secure hold essential for removal and installation of stubborn barrel nuts as well as a variety of other tasks.
? Multi-function design holds AR-15 and AR-10 uppers
? Can secure any Pic-Rail receiver by clamping the rail
? Durable extruded and machined aluminum construction

Wheeler Delta Series Ar-15 Maintenance Mat Delta Ar-15 Maintenance Mat

Wheeler’s Delta Series AR-15 Upper Vise Block is optimized for left hand and right hand Mil Spec A2 upper receivers with carry handles as well as flattop style receivers. Other AR-15 variants may be adapted with special attention to potentially non-conforming surfaces or features.

• Allows you to safely clamp on to your AR-15 upper receiver in a vise holding it securely without twisting crushing or marring the finish
• For torqueing a barrel on removing a stubborn barrel nut or for simple gun maintenance and cleaning
• Made of a high pressure solvent resistant polymer material
• All-around product for your AR-15 gunsmithing maintenance or cleaning needs
• Includes a receiver insert with a gas tube alignment system making sure your gas tube is always in line when installing a barrel and torqueing a barrel nut
• Durable design holds receiver securely and fits both left and right-hand Mil Spec A2 upper as well as flat top receivers

Introducing the Wheeler Castle Nut Crowfoot Wrench, ingeniously designed for standard and low-profile castle nuts. This professional-grade tool is crafted from hardened steel to withstand the most rigorous use and resist bending. Whether you’re assembling, maintaining, or modifying your AR-15/LR308, this crowfoot wrench is precision-engineered to ensure a perfect fit and confidence in every installation.

The Wheeler Pro Series Ultimate AR-15 Armorer’s Kit has been engineered and designed with both the DIY gun-builder and the seasoned professional gunsmith in mind. This 28-piece kit of professional-grade tools redefines what it means to build maintain accurize and customize an AR-15. Each tool in this comprehensive collection is purpose-built for precision and reliability giving you the confidence that you have the right tools for the job. From installing springs and detents in a lower receiver lapping upper receivers for accuracy or torqueing down muzzle devices and handguards rest assured this kit has it covered. No more worries about damaged or misplaced tools with the premium latching hard case that ensures that your tools remain protected and organized wherever you go.

• Professional Armorer’s Grade Kit Built From The Ground Up For The Diy Gun Builder Or Professional Gunsmith?
• 28-piece Kit Includes All The Tools Needed To Build Accurize And Maintain An AR-15?
• Premium Latching Hard Case With Handle Keeps Contents Protected And Secure During Transport

Product Contents:

• 1/2" Drive XL F.A.T. Wrench
• Complete Set of Multi-Function Crowfoot Wrenches
• AR-15 Roll Pin Install Tool Kit
• Upper Receiver Lapping Kit
• AR-15 Armorer's Bench Block
• Gas Block Taper Pin Removal Tool
• AR-15 Pivot and Roll Pin Installation Tool
• AR-15 Magwell Vise Block
• Upper/Pic Rail Vise Block
• AR-15 Upper Receiver Action Rod
• Latching Hard Case with Handle

The Wheeler Digital F.A.T. Wrench (Firearm Accurizing Torque) brings even more precise torque settings to the handheld torque screwdriver. This amazing digital handheld torque wrench lets you apply repeatable torque with precision. Equipped with a generous torque adjustment range of 5-100 in-lbs. the Digital F.A.T. Wrench can tackle a wide variety of common gunsmithing tasks like tightening installing red dot sights scope rings bases and other fasteners to their exact torque specification. The dual audible and visual indicators tell the user exactly when the desired torque setting has been achieved safeguarding against over-torqued or broken fasteners. The driver features a magnetized tip to prevent bits from falling out and a textured rubber over-mold that improves ergonomics and grip while reducing hand strain during high torque applications. The driver shafts and bits all have a black phosphate coating that prevents rust and corrosion and extends tool life; guaranteeing that your tools will look great for years to come. All the tools are neatly organized and secured in a premium latching hard case that easily stacks on top of other Wheeler screwdriver sets for smart convenient storage.

Keeping your scope perfectly aligned is critical to long-range accuracy. Canting your scope even just a couple of degrees can cause error in point of impact. With modern ?Drop-Compensating? scopes an Anti-Cant Indicator is a necessity. If your gun isn?t aligned correctly dialing up the turrets or using hold-over marks will just throw your shot off. This error can easily be enough to cause misses.

The Wheeler Anti-Cant Indicator ensures that your rifle is always held near perfectly vertical eliminating any chance for ?Cant Error? to cause a miss. Indicates precise repeatable level gun position Increases accuracy by insuring proper gun alignment which is critical for turret adjustment and hold over for bullet drop compensation Easy-to-view from shooting position Attaches to scope folds in when not in use Precision machined aluminum with anodized finish.

Keeping your scope perfectly aligned is critical to long-range accuracy. Canting your scope even just a couple of degrees can cause error in point of impact. With modern ?Drop-Compensating? scopes an Anti-Cant Indicator is a necessity. If your gun isn?t aligned correctly dialing up the turrets or using hold-over marks will just throw your shot off. This error can easily be enough to cause misses.

The Wheeler Anti-Cant Indicator ensures that your rifle is always held near perfectly vertical eliminating any chance for ?Cant Error? to cause a miss. Indicates precise repeatable level gun position Increases accuracy by insuring proper gun alignment which is critical for turret adjustment and hold over for bullet drop compensation Easy-to-view from shooting position Attaches to scope folds in when not in use Precision machined aluminum with anodized finish.

Wheeler Engineering Cerama Coat is a specially formulated finish for firearm that provides extremely high durable. The key to the super hard finish is ultra-fine ceramic molecules that actually crosslink and bond to the base material. A heating process after application forms the bond and hardens the finish. Highly resistant to scratching chipping and gun solvents. Bonds to ferrous metals alloys stainless steel and synthetics that can be heated to 200 degrees F. Can be applied over bare metal or existing blued anodized or parkerized finish. Available in four popular matte finish colors to customize any gun or accessory.

• Ceramic infused formulation that crosslinks with the base material to create the most durable finish on the market
• Compatible with ferrous metals alloys stainless steel and synthetics
• Highly resistant to scratching chipping and gun solvents
• Non reflective matte finish colors
• Customize any gun or accessory
• Weatherproof any gun?s finish

Do not let carbon build-up effect your next shoot get the Wheeler Delta Series Carbon Multi-Scraper. This stainless steel coated compact tool is made to clean 11 vital surfaces of the bolt carrier group. Keep this tool in your gun room or take advantage of its convenient size by storing it inside your rifle?s pistol grip so you always have it on hand. This is the perfect tool for getting you back to shooting quickly and effectively.

Features:

• Cleans 11 surfaces of the bolt carrier group
• Fits inside AR pistol grips
• Coated stainless steel
• Features a cam pin scraper large diameter firing pin scraper bolt face scraper cotter pin removal tool boat tool shoulder scraper small diameter firing pin scraper bolt lug scraper bolt tail scraper interior BCG scraper and bolt waist scraper

The Wheeler Delta Series AR-10 Bore Guide will help protect the bore and action of your rifle by properly aligning the cleaning rod and reducing solvent overflow. Cleaning without a bore guide can allow the rod to ?bow? and rub or gouge chamber and throat of the bore causing real damage and loss of accuracy. Keeping the rod properly aligned not only protects your barrel it directs the force exerted on the cleaning rod handle allowing tight patches to be pushed more easily.

The AR-10 Bore Guide is precision CNC machined aluminum with a durable anodized finish. It fits securely in any AR-15 upper and can be retained in place by closing the dust cover on the upper which engages a groove in the guide. The bore guide also has chemical resistant O-rings for retention in uppers without dust covers. A solvent port is conveniently located to the rear of the guide which extends out of the upper making it easily accessible during cleaning.

• Protects chamber & bore from damage
• Ensures proper rod alignment for easier cleaning
• Reduces solvent leakage into gun?s action
• Anodized aluminum for durability
• Integrated solvent port
• AR-10/LR Bore Guide fits .308
• Secures in place with dust cover engagement

This multi-tool design can be used to perform many different functions in the field. When you need to make adjustments or scrape some carbon build-up simply reach down and grab this tool out of the included nylon belt sheath and go to work. After you are finished snap the tool back in and continue shooting.

Wheeler Engineering combined the Roll Pin Starter Set and the Ball Profile Roll Pin Punch Set with a precision machined gunsmithing hammer into one comprehensive kit.

Ball Profile Roll Pin Punch Set :

• Machined and hardened from steel to prevent bending or breaking while driving roll pins
• Designed with a ball profile tip to provide proper alignment of the roll pin and prevent damage to the firearm or roll pin
• The 9 piece set includes: 5/16 in. 1/4 in. 7/32 in. 3/16 in. 5/32 in. 1/8 in. 3/32 in. 5/64 in. 1/16 in.
• Keeps punch from walking off pin
• Knurled handles

Roll Pin Starter Set :

• Machined and hardened from steel to prevent bending or breaking while starting roll pins
• Designed with a counter-bored tip to properly align and start the roll pin preventing damage to the firearm
• The 9 piece set includes: 5/16 in. 1/4in. 7/32 in. 3/16 in. 5/32 in. 1/8 in. 3/32 in. 5/64 in. 1/16 in.
• Knurled handles

Small Hammer :

• Small Hammer (6 oz) for precise control and smaller roll pins
• Steel Head – For metal punches and surfaces
• Brass Head – For preventing marring

The Wheeler Engineering Precision Micro Screwdriver Set features high quality chrome plated steel bits to hold up to heavy use and the comprehensive 58 piece set meet all of your precision screwdriver needs. The set include a handle that extends from 3-3/4″ to 5-1/2″ and a 5-3/4″ flexible extension shaft to get you into those hard to reach places. The set comes organized with individual bit markings and a convenient carry/storage case. All bits are precision formed for maximum fastener engagement. Chrome plated steel bits Extendible Handle from 3-3/4″ to 5-1/2″ 5-3/4″ flexible extension shaft 58 piece set. Organized carry/storage case.

• Nut Drivers (in mm): M2.5 M3 M3.5 M4 M4.5 M5
• Hex Bits (in mm): H.7 H.9 H1.3 H1.5 H2 H2.5 H3 H3.5 H4
• Square Bits: SQ 0 SQ 1 SQ 2
• Flat Bits (in mm wide): 1 1.3 1.5 2.0 2.5 3.0 4.0
• Phillips Bits: J000 J00 J0 J1
• PH000: PH00 PH0 PH1 PH2
• Triangle Bits: 3.0 2.3 2.0
• Star Bits: .8 1.5 2.0
• U Bit: 2.6
• Torx Bits: T3 T4 T5 T6 T7 T8 T9 T10 T15 T20
• Y Bits: Y0 Y1
• Screwdriver handle adapter

Technological advances in today?s modern firearms ammunition and optics have enhanced the potential for long range accuracy. However precision mounting and alignment of your system?s scope is critical to realizing the accuracy. A scope?s reticle must be precisely aligned with the weapon to ensure holdover or turret adjustments for bullet drop produce true vertical compensation for point of impact. If the crosshairs are canted left or right both elevation and windage bullet impact error will occur.

The Wheeler Professional Reticle Leveling System is a precision tool and technique designed to allow a scope to be perfectly leveled on any firearm with ease. CNC machining factory adjusted calibration set screws anodized aluminum construction and protective molded case put this instrument in a class of its own.

The system is comprised of two machined aluminum level housings calibrated to their integrated levels. The Barrel Clamp Level is attached to the guns barrel while the smaller Reference Level is placed on scope base bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is then turned until its level is centered to match the Reference Level. At this point the Barrel Clamp Level is calibrated to the guns axis. The Scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler PRLS is the most effective instrument available for precision scope alignment.

• Precision tool for scope reticle alignment Factory calibrated Reference Level
• Maximize accuracy potential Tunable Barrel Clamp Level
• CNC machined aluminum level housings Protective storage case

The Wheeler Engineering Roll Pin Punches are machined from hardened steel to prevent bending or breaking while driving any size roll pin. The punches are designed with a hemispherical tip to provide proper alignment of the roll pin to prevent damage to the firearm and the roll pin. The 9 piece set includes: 5/16" 1/4" 7/32" 3/16" 5/32" 1/8" 3/32" 5/64" 1/16" punches in a nylon pouch.

• 9-piece set 1/16" through 5/16"
• Hardened Steel construction
• Hemispherical Tip
• Fitted Nylon Storage Pouch